1 / 4

On your paper, fill in the blanks concerning the 5 steps of

Bell Work. Use the right arrow button to advance through the presentation. Sep 27, 2013. SPI 0807.T.E.1 (Prototype Testing) SPI 0807.T/E.2 (Eng. Design Process). On your paper, fill in the blanks concerning the 5 steps of the Engineering Design Process as shown below. (see p

kimberley-edwards
Télécharger la présentation

On your paper, fill in the blanks concerning the 5 steps of

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bell Work Use the right arrow button to advance through the presentation Sep 27, 2013 SPI 0807.T.E.1(Prototype Testing) SPI 0807.T/E.2 (Eng. Design Process) • On your paper, fill in the blanks concerning the 5 steps of • the Engineering Design Process as shown below. (see p • Step 1: Identify a ________________. • Step 2: Develop possible ___________. • Step 3: Make a ____________. • Step 4: _________ the prototype. • Step 5: ___________ and then re-test the prototype.

  2. SPI 0807.T.E.1(Prototype Testing) SPI 0807.T/E.2 (Eng. Design Process) Notes SPI 0807.T/E.1 Identify the tools and procedures needed to test the design features of a prototype (1) (5) (2) Steps 4 and 5 are the steps of the EDP where we test our prototypes (3) (4)

  3. SPI 0807.T/E.1 (Prototype Testing) Notes • Engineering Design Process-Prototype Testing • The 4th step in the eng. design process is testing your prototype • Often, the prototype does not work very well at first • Testing a prototype can be dangerous (see picture below) • By testing the prototype, the designers find problems to fix • They fix problems then test it again. They repeat this over & over. (This is step 5 of the eng design process.) Here is a picture of Orville and Wilbur Wright testing their prototype airplane

  4. SPI 0807.T/E.1 (Prototype Testing) Notes SPI 0807.T/E.1 Identify the tools and procedures needed to test the design features of a prototype • The procedures and tools for testing a prototype are dependent • upon the type of technology and the purpose for that technology. • For Example: You would not test a new cell phone the same way you would test a new jet airplane or a new football helmet. • Answer These Questions On Your Paper: • A) How would you test a cell phone prototype? • B) What tools would you use to test this cell phone? • C) How would you test a jet airplane prototype? • D) What tools would you use to test this jet airplane? • E) How would you test a football helmet prototype? • F) What tools would you use to test this jet airplane?

More Related