1 / 20

Wavewin Sniffer 24 Configuration & Polling Software (Wavewin Sniffer Operations Guide)

Wavewin Sniffer 24 Configuration & Polling Software (Wavewin Sniffer Operations Guide). Operations Guide Content IRIG-B Timing. IRIG-B Timing Configuring a Channel for Data Timing “CBL-IRIG-B” Connect the IRIG-B Cable to the Unmodulated IRIG-B Port on the GPS Clock.

landry
Télécharger la présentation

Wavewin Sniffer 24 Configuration & Polling Software (Wavewin Sniffer Operations Guide)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wavewin Sniffer 24Configuration & Polling Software (Wavewin Sniffer Operations Guide)

  2. Operations Guide Content IRIG-B Timing

  3. IRIG-B Timing Configuring a Channel for Data Timing “CBL-IRIG-B” Connect the IRIG-B Cable to the Unmodulated IRIG-B Port on the GPS Clock

  4. Step 1: Enter “GPS IRIG-B” in the “Channel Titles” field.

  5. Step 2: In “Configuration” tab, select “CBL-IRIG-B”.

  6. Step 3:Save the active configuration to disk.

  7. Step 4: Click “Start Recorder” to begin polling.

  8. Step 5: When the “Locked” indicator turns green, the Wavewin Sniffer 24 is synchronized. If the indicator does not turn green, follow the next slides:

  9. Customized IRIG-B Settings

  10. Step 6:Click “File Properties” & check “Save Continuous”. Then click “OK”.

  11. Step 7: Click “Start Recorder”, wait 5 seconds, click “End Recorder” & then from “File Properties” uncheck “Save Continuous”.

  12. Step 8: Click “View Files” to view the data file.

  13. Step 9: Double click on the file to view the data.

  14. Step 10: Find the instantaneous value in the middle of the IRIG-B signal. In this case the value is 100.

  15. Step 11: Enter “100” in “Trigger Value” field and make sure the “Trig Type” field is set to “Inst”.

  16. Step 12:Save the active configuration to disk.

  17. Step 13: Click “Start Recorder”.

  18. Step 14: Verify that the Wavewin Sniffer 24 is synchronized.

  19. Step 15: Click “End Recorder”.

  20. End of Operations Guide

More Related