1 / 14

Lecture Problem 136

Lecture Problem 136. E106 Section 2 Corina Tom 3-7-07. Problem Statement. Calculate the maximum radius and wall thickness of a spherical pressure vessel made of Ti-6A1-4V Titanium Alloy periodically pressurized to 500 kPa, so that it will leak before breaking.

lara-bond
Télécharger la présentation

Lecture Problem 136

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture Problem 136 E106 Section 2 Corina Tom 3-7-07

  2. Problem Statement • Calculate the maximum radius and wall thickness of a spherical pressure vessel made of Ti-6A1-4V Titanium Alloy periodically pressurized to 500 kPa, so that it will leak before breaking. • Use data on Table 9.1 on pg. 298 of Callister.

  3. Pressure Vessels! • Designed to contain a significant pressure • Force is distributed evenly over the entire surface • Usually spherical or cylindrical (curvy!) • Sharp angles = stress concentrations • Pressure results in membrane stresses

  4. σxx = σyy P It’s a stressful state • Stress does not depend on direction • Thin-wall t ≤ 0.1ri • ri = ro = r • Balance forces:

  5. 2a t Leak-Before-Break • Want crack through entire thickness before rapid crack propagation

  6. Leak-Before-Break • Vessel must contain pressure without yielding

  7. Assumptions • Thin-walled pressure vessel • Plane Strain • Y = 1 • One half internal crack length equal to thickness will ensure leakage

  8. Max t • Kic = 55 MPa m1/2 • σy= 910 MPa • Y = 1 t = 1.16 mm

  9. Max r • σy= 910 MPa • P = 500 kPa = .5 MPa • T = 0.00116 m r = 4.23 m

  10. Design Review • Leak-before-break • No plastic deformation • Want critical crack length = thickness • Yielding before failure • Plastic deformation of walls • Want large critical crack lengths

  11. Great Molasses Flood • North End - Boston • Jan. 15, 1919 • Purity Distilling Company • Neglected safety precautions • 21 people and many horses killed • Over 150 injured Aftermath - wikipedia.org

  12. Applications • Poor pressure vessel design may lead to catastrophic failure • Methods to catch safety hazards • Leaking • Vessel Distortion

  13. References • Callister, W. Fundamentals of Materials Science and Engineering. 2nd Edition. John Wiley & Sons, Inc., 2005. • “Great Molasses Flood.” Massachusetts Foundation for the Humanities. <massmoments.org> • Rossman and Dym. Continuum Mechanics: Mechanics of Solids and Fluids. Harvey Mudd College, 2006.

  14. Questions???

More Related