1 / 15

Architectural Drawing

Sectional View Drawings. Architectural Drawing. Foundation Construction Practices. How do I develop appropriate foundation details?. Dimensioned Floor Plan. Sectional View. Tells HOW the walls, roof, foundation are built. Shows exact structural components.

lawrencepwilliam
Télécharger la présentation

Architectural Drawing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sectional View Drawings Architectural Drawing

  2. Foundation Construction Practices • How do I develop appropriate foundation details?

  3. Dimensioned Floor Plan Sectional View Tells HOW the walls, roof, foundation are built. Shows exact structural components Tells WHERE all walls, windows and doors are placed Walls are drawn to represent thickness and surface treatment (brick, siding) Sectional views are slices of the floor plan

  4. Vocabulary • CMU- concrete masonry unit- a block • Parging- cement coating on outside of block- used to help seal from moisture. • Footer- foundation structure that house is built upon. • Footer Drain- stone and pipe used to channel water away from foundation.

  5. Footer Calculations: The footings for the house need to carry the load of the house. Improper footings may lead to house movement, sinking and cracking. The image to the left shows calculations for proper footing sizes.

  6. How do I develop sill and wall details? Vocabulary: Sill- Wood that contacts the foundation. Plate- Top and bottom of wall section. Stud- Vertical members of a wall. O.C.- Measurement feature “on center”. R- Values- Insulation value of a material.

  7. How do I develop ceiling and roof details? • Vocabulary: • Cornice- edge of roof detail. • Pitch- angle of a roof- expressed as rise over run. Base 12 • Soffit- horizontal surface under an overhang • Fascia- vertical surface of an overhang (where the gutter hangs)

  8. Rafters and Ceiling Joists “W” Truss

More Related