1 / 42

ACCG224 – Session 1, 2013 Week 4

ACCG224 – Session 1, 2013 Week 4. Accounting for Property, Plant and Equipment (Acquisition, Depreciation and Revaluation). Learning objectives. Understand the nature of property, plant and equipment (PPE); understand the criteria for initial recognition of PPE;

lee
Télécharger la présentation

ACCG224 – Session 1, 2013 Week 4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ACCG224 – Session 1, 2013 Week 4 Accounting for Property, Plant and Equipment (Acquisition, Depreciation and Revaluation)

  2. Learning objectives • Understand the nature of property, plant and equipment (PPE); • understand the criteria for initial recognition of PPE; • understand how to measure PPE on initial recognition; • explain the alternative ways, in which PPE can be measured subsequent to initial recognition; • explain the cost model of measurement and understand the nature and calculation of depreciation; • explain the revaluation model of measurement; • understand the factors to consider when choosing which measurement model to apply; • account for derecognition; • implement the disclosure requirements of AASB 116.

  3. Relation to weeks 2 and 3 • Conceptual framework: general principles about • definition, • recognition and • measurement of assets and liabilities. • Now we look at specific accounting standards in relation to a particular type of assets: • property, plant and equipment (PPE) (AASB 116). • Including tax implications (AASB 112).

  4. Overview AASB 116: Property, Plant and Equipment (PPE) • Definition • Initial recognition of an asset • Subsequent measurement: • Cost Model: • Depreciation: • allocating the depreciable amount of a non-current asset over the asset’s expected useful life; • factors that must be considered in determining the useful life of a depreciable asset; • various approaches (straight-line, sum-of-digits, declining balance, production basis) for this allocation; • Revaluation Model • Derecognition • Disclosure requirements

  5. The nature of PPE • AASB 116 defines PPE as: • tangible items; • with a specific use within the entity; • that are expected to be used during more than one period (ie. they are non-current in nature). • AASB 116 specifically excludes: • assets held for sale – AASB 5 • biological assets – AASB 141 • mineral rights/reserves – AASB 6 • For some purposes, PPE is divided into classes, e.g. • land, buildings, machinery, ships, aircraft, motor vehicles, furniture and fixtures, office equipment. also special rules for investment property – AASB 140

  6. Initial recognition of PPE • Cost recognised as an asset if: • it is probable that economic benefits will flow to the entity, and • the cost can be reliably measured. • Where future economic benefits are not expected to flow to the entity, costs incurred should be expensed. • Component parts (with different useful lives) are required to be separately accounted for: • for example, an aircraft: • the engine, frame and fittings of an aircraft are likely to have different useful lives.

  7. Initial measurement of PPE • PPE is initially measured at cost, which includes: • purchase price (at fair value); • directly attributable costs required to bring the asset to the location and condition necessary for it to operate; • borrowing costs (AASB 123); • Initial estimate of costs of dismantling, removing the item or restoring the site. includes duties and taxes but excludes rebates and discounts more details on next slide interest paid to finance acquisition, construction or production until ready for use,if for a substantial period of time for example, an offshore oil platform

  8. Directly attributable costs • ‘Directly attributable costs’ include • costs of employee benefits arising from the construction or acquisition of the item of property, plant and equipment; • costs of site preparation; • initial delivery and handling costs; • installation and assembly costs; • costs of testing whether asset is functioning properly, after deducting the net proceeds from selling any items produced while bringing the asset to that location and condition (e.g. samples); • professional fees.

  9. Measurement subsequent to initial recognition • AASB 116 allows a choice of two possible measurement models: • cost model; • revaluation model. • Accounting policy choice of this decision based primarily on relevance of information. • The policy that is chosen must be applied to a whole class of assets. • May change policy, but only if it results in more relevant/reliable information. Each model will be discussed in detail in the following slides Refer to section 7.6 of text for examples of what constitutes a class of assets

  10. The cost model • AASB 116 requires that assets are carried at cost less any accumulated: • depreciation; • impairment losses. • Repair and maintenance costs are expensed as incurred, not capitalised. • Capitalisation requires (at time of expenditure) increased probable future economic benefit: • for example, replacement of car engine. discussed in week 6

  11. Depreciation – fundamentals AASB 116 includes the following definitions: • Depreciation: • the systematic allocation of the depreciable amount of an asset over its useful life. • Depreciable amount: • the cost of an asset less its residual value (or other appropriate amounts substituted for cost – eg. fair value). • Residual value: • the estimated value of the asset at the end of its useful life to the entity. • Useful life: • the period over which an asset is expected to be used by an entity/the number of production (or similar) units expected to be obtained by the entity.

  12. Depreciation – fundamentals (cont’d) • Depreciation is an allocation process designed to reflect the decline in the value of the asset in a pattern consistent with the consumption of economic benefits by the entity. • AASB 116 does not specify how this allocation process should be undertaken. • Various depreciation methods are used in practice. Common methods are discussed on the following slides. • Please note that depreciation applies to both the cost and the revaluation model! In all cases, depreciation expense is recognised with the following journal: DR Depreciation expense CR Accumulated depreciation

  13. Depreciation – common methods • Straight-line method: • assumption: asset used evenly throughout its life; • this method is appropriate when benefits to be derived from the asset are expected to be evenly received throughout the asset’s useful life; • annual depreciation amount:

  14. Depreciation – common methods (cont’d) • Diminishing balance method: • assumption: more benefits received in earlier years of the life of asset; • depreciation expense is calculated on the asset’s opening written-down value x depreciation rate; • written-down value: • cost (or revalued amount) less accumulated depreciation; • depreciation rate:

  15. Depreciation – common methods (cont’d) • Units of production method: • based on expected use or output of asset; • depreciation expense for the period is calculated as:

  16. Depreciation – common methods (cont’d) • Sum-of-digits method: • this method is appropriate where useful life might be related more to production output than time and when economic benefits expected to be derived are greater in the early years than later years • depreciation expense: • (cost - residual value) is multiplied by successively smaller fractions to calculate depreciation expense; • numerator in fraction - changes each year, and is the years remaining of the asset’s useful life at the beginning of the period; • example for the 2nd year if useful life = 5 years:

  17. Depreciation – useful life • Management should consider the following factors when estimating the useful life of an asset: • expected use; • physical wear and tear; • technical or commercial obsolescence; • legal or similar limits. • Useful life is subject to periodic review. • Land is not subject to depreciation as it does not have a limited useful life.

  18. The revaluation model - fundamentals • As an alternative to the cost model AASB 116 allows the revaluation model to be used for classes of assets. • Revaluation: adjustment of PPE’s carrying amount so that it reflects its current fair value. • Measurement basis is fair value (FV). • Frequency of revaluations is not specified, but must be performed with sufficient regularity such that the carrying amount of assets is not materially different from their FV. • Revaluation performed on a class basis. • Accounting performed on an asset-by-asset basis.

  19. The revaluation model – accounting on an asset-by-asset basis • A Ltd has decided to change from the cost model to the revaluation model to account for plant. • At 30 June 2010 A Ltd owned the following plants: class of assets 50,000 (20,000) 30,000 • A revaluation increment will be recorded for Plant A and a revaluation decrement will be recorded for Plant B.

  20. The revaluation model:revaluation increments • Increments are • credited to equity: “asset revaluation surplus” (ARS) account; • through other comprehensive income (OCI); • not part of profit/loss (P&L) for the year. • The revaluation of plant A would be recorded as follows: Dr Accum. depreciation 100,000 * Cr Plant 50,000 ** Cr Gain on revaluation (OCI) 50,000 *** ** Cost - FV (200,000 – 150,000) = 50,000 * Removal of existing accumulated depreciation *** Amount of increment

  21. The revaluation model:revaluation increments (cont’d) • AASB 116 requires the tax effects of the revaluation to be considered and the ARS account to be recognised net of the resulting tax effect. • This is achieved by debiting a special type of income tax expense as part of other comprehensive income (OCI) and crediting a deferred tax liability (DTL). • An upwards revaluation of an asset creates a taxable temporary difference (TTD) leading to a deferred tax liability (DTL). • For plant A this would be calculated as: CA – TB = TTDx 30% = DTL 150,000 – 100,000 = 50,000 x 30% = 15,000 Assumes that tax and acct. depn. rates are the same Based on new FV of asset

  22. The revaluation model:revaluation increments (cont’d) • The tax effect for plant A would be recorded as follows: Dr Income Tax Expense (OCI) 15,000 Cr Deferred tax liability 15,000 • Combined entry: Dr Accum. depreciation 100,000 Dr Income tax expense (OCI) 15,000 Cr Plant 50,000 Cr Deferred tax liability 15,000 Cr Gain on revaluation (OCI) 50,000 • At year end the OCI accounts are closed against the ARS: Dr Gain on revaluation (OCI) 50,000 Cr Income tax expense (OCI) 15,000 Cr Asset revaluation surplus (ARS) 35,000

  23. The revaluation model:revaluation decrements • The accounting treatment of a revaluation decrement is as follows: • immediate recognition of an expense; • no extra tax-effect entries beyond the tax-effect worksheet. • The revaluation of Plant B would be recorded as follows: Dr Accum. depreciation 40,000 * Dr Loss on revaluation (P&L) 20,000 ** Cr Plant 60,000 *** *Removal of existing accumulated depreciation **Amount of decrement ***Cost - FV (140,000 – 80,000) = 60,000

  24. The revaluation model:reversing previous increments • A decrement reversing a previous increment eliminates any ARS before recognising an expense. • In relation to plant B, assume that a gross revaluation increment of $10,000 had been made in 2006.

  25. The revaluation model:reversing previous increments (cont’d) • The revaluation of plant B would be recorded as follows: Dr Accum. depreciation 40,000 Dr Deferred tax liability 3,000 Dr Loss on revaluation (OCI) 10,000 Dr Loss on revaluation (P&L) 10,000 Cr Income tax expense (OCI) 3,000 Cr Plant 60,000 Workings for journal Gross decrement 20,000 Reversal of prev. increment (10,000) – tax effect 3,000 DR to P&L10,000

  26. The revaluation model:reversing previous increments (cont’d) • At year end the OCI accounts are closed against ARS: Dr Income tax expense (OCI) 3,000 Dr Asset revaluation surplus (ARS) 7,000 Cr Loss on revaluation (OCI) 10,000

  27. The revaluation model:reversing previous decrements • An increment reversing a previous decrement is recognised through profit/loss (P&L). • Any excess is recorded as other comprehensive income (OCI) and increases ARS (net of related tax effects). • In relation to plant A, assume that a revaluation decrement of $15,000 had been made in 2006.

  28. The revaluation model: reversing previous decrements (cont’d) • The revaluation of plant A would be recorded as follows: Dr Accum. depreciation 100,000 Dr Income tax expense (OCI) 10,500 Cr Plant 50,000 Cr Gain on revaluation (P&L) 15,000 Cr Gain on revaluation (OCI) 35,000 Cr Deferred tax liability 10,500 Working for journal Gross increment 50,000 Reversal prev. decrement (15,000) (P&L) Gain on revaluation (OCI) 35,000 Less: tax effect (30%) (10,500) CR to ARS24,500

  29. The revaluation model: reversing previous decrements (cont’d) • At year end the OCI accounts are closed against ARS: Dr Gain on revaluation (OCI) 35,000 Cr Income tax expense (OCI) 10,500 Cr Asset revaluation surplus (ARS) 24,500

  30. The revaluation model:depreciation of revalued assets • When an asset is revalued, the depreciation charge to be recorded over the remaining useful life of the asset is recalculated by reference to the fair value of the asset.

  31. The revaluation model: comprehensive example • On 30 June 2011 the statement of financial position of A LTD showed the following non-current assets after charging depreciation:

  32. The revaluation model: comprehensive example (cont’d) • The company has adopted the revaluation model for the measurement of all property, plant and equipment. This has resulted in the recognition in previous periods of an asset revaluation surplus for the building of $ 14,000. The plant consists of a machine purchased on the 1 July, 2010. On 30 June 2011, an independent valuer assessed the fair value of the building to be $160,000 and the plant to be $ 90,000. The income tax rate is 30%. • Required: • Prepare the journal entries to revalue the building and the plant as at 30 June 2011. • Assume that the building and plant had remaining useful lives of 5 years and 4 years respectively, with zero residual value. Prepare the journal entries to record depreciation expense for the year ended 30 June 2012 using the straight line method.

  33. The revaluation model: comprehensive example (cont’d) • 30/06/2011 Dr Accumulated depreciation – building 100 000 Dr Loss on revaluation (OCI) 20 000 Dr Deferred tax liability 6 000 Dr Loss on revaluation (P&L) 20 000 Cr Income tax expense (OCI) 6 000 Cr Building 140 000 Dr Income tax expense (OCI) 6 000 Dr Asset revaluation surplus (ARS) – building 14 000 Cr Loss on revaluation (OCI) 20 000

  34. The revaluation model: comprehensive example (cont’d) • 30/06/2011 (cont’d) Dr Accumulated depreciation – plant 40 000 Dr Income tax expense (OCI) 3 000 Cr Plant 30 000 Cr Gain on revaluation (OCI) 10 000 Cr Deferred tax liability 3 000 Dr Gain on revaluation (OCI) 10 000 Cr Income tax expense (OCI) 3 000 Cr Asset revaluation surplus (ARS) – plant 7 000

  35. The revaluation model: comprehensive example (cont’d) • 30/06/2012 Dr Depreciation expense – building 32 000 Cr Accumulated depreciation – building 32 000 ($160 000/5) Dr Depreciation expense – plant 22 500 Cr Accumulated depreciation – plant 22 500 ($90 000/ 4)

  36. The revaluation model:transfers from ARS • Transfers may be made from the ARS in the following circumstances: • When a revalued asset is derecognised (ie scrapped or sold) → the balance in the ARS may be transferred to retained earnings. • When a revalued asset is being depreciated → the ARS may be progressively transferred to retained earnings over the useful life of the asset. • Bonus share issues may be made from the ARS DR ARS CR Retained earnings DR ARS CR Share capital

  37. Choosing between the models • There is a cost disincentive to adopt the revaluation model (Australian experience). • Cost model harmonises with U.S. GAAP. • Revaluation model provides increased relevance & reliability.

  38. Accounting for gains/losses from derecognition • Note: Assets classified ‘held for sale’ are treated according to AASB 5 → the following applies only to PPE which has not been classified as ‘held for sale’. • Gain or loss from derecognition of an item of property, plant and equipment is to be calculated as the difference between (AASB 116): • net disposal proceeds (if any); and • the asset’s carrying amount. • Derecognition • the point in time when an asset is removed from the statement of financial position (balance sheet): • when an asset is sold; or • when no future economic benefits are expected from an asset’s use or disposal.

  39. Accounting for gains/losses from derecognition (cont’d) • Example: • A Ltd acquired a machine on 1 July 2007 for $50,000; • Useful life = 4 years; residual value = $10,000; • On 1 July 2009 the machine was sold for $45,000. • The journal entries to account for the sale are: Dr Cash 45,000 Cr Proceeds on sale 45,000 Dr Carrying amount of asset 30,000 Dr Accum. depreciation 20,000 Cr Machine 50,000 The gain on sale is It is common to show this gain on sale net in the income statement $45,000 - $30,000 = $15,000

  40. Accounting for gains/losses from derecognition (cont’d) • When an revaluedasset is sold, any resulting balance in the revaluation surplus (AASB 116) • may be transferred directly to retained earnings; • cannot be transferred to profit/loss (ie ‘recycling’ is not allowed); • hence, for non-current assets under the revaluation model any gain on sale shown in profit/loss will be less than for assets under the cost model.

  41. Disclosure requirements • For each class of property, plant and equipment the following must be disclosed (AASB 116): • measurement basis used for gross carrying amount; • depreciation methods used; • useful lives or depreciation rates used; • gross carrying amount and accumulated depreciation at beginning and end of period; • reconciliation of carrying amount at beginning and end of period.

  42. Disclosure requirements (cont’d) • The required disclosures regarding asset revaluations (AASB 116) are: • effective date of revaluation; • whether an independent valuer was involved; • methods and assumptions applied; • extent to which fair values were determined, with reference to observable prices in active markets or recent market transactions; • for each revalued class, the carrying amount if the cost model was used; • the revaluation surplus, indicating the change for the period and any restrictions on distribution of the balance to shareholders.

More Related