1 / 14

Introduction to Brittle Deformation

Introduction to Brittle Deformation. Outline. Principal stresses Stress ellipse and stress ellipsoid Fundamental fracture modes Crack propagation Extensional joints Interpretation Problem. Principal Stresses. s 1 - greatest principal stress s 2 - intermediate principal stress

lesterlong
Télécharger la présentation

Introduction to Brittle Deformation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to Brittle Deformation

  2. Outline • Principal stresses • Stress ellipse and stress ellipsoid • Fundamental fracture modes • Crack propagation • Extensional joints • Interpretation Problem

  3. Principal Stresses • s1 - greatest principal stress • s2 - intermediate principal stress • s3 - minimum principal stress • Stress is a force/area • Principal stress directions are mutually perpendicular

  4. Principle Stresses • Principal stresses are normal stresses only

  5. Stress Ellipse • In 2-D, s1 and s3 are mutually perpendicular and form the axes of a stress ellipse s3 s1

  6. Stress Ellipsoid • In 3-D, s1, s2 , and s3 are mutually perpendicular and form the axes of a stress ellipsoid • The length of an axis is related to the magnitude of the stress • The stress ellipsoid to the right might represent the stress at a point in the shallow subsurface

  7. Stress Ellipsoid • This stress ellipsoid could represent the stress at a point located in the suture of a collision zone between two continents

  8. Fracture Modes Direction crack tip propagates relative to sense of slip defines Mode type Mode I Opening Mode II Sliding Mode III Scissoring

  9. How to Stop a Propagating Crack… Extremely high stress concentration

  10. How to Stop a Propagating Crack… Extremely high stress concentration Drill a hole and increase the area of the crack tip Lower stress

  11. Extensional Joints • Joint surface oriented perpendicular to s3 • Mode I fracture - opening, no shear, no scissoring Opening direction s3

  12. Growth of Joints Growth direction

  13. Joints in Sedimentary Rocks

  14. Joints in Igneous Rocks

More Related