1 / 10

ESD protection circuit

ESD protection circuit. Circuit 1. DM model. 1.) the circuit shows that the SRV05-4 is short to shut down,when the surge is DM model , so the circuit can protect the IC away from DM model surge(EFT ,lightning). CM model.

loan
Télécharger la présentation

ESD protection circuit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ESD protection circuit

  2. Circuit 1

  3. DM model 1.) the circuit shows that the SRV05-4 is short to shut down,when the surge is DM model , so the circuit can protect the IC away from DM model surge(EFT ,lightning).

  4. CM model 1.) the ESD and CDE are the CM model , so the SRV05-4 will do not work because it is not connect to GND thinking of HI-POT. 2. the protection for CM model relies on the transformer . But the isolation of transformer is 1500V , so it is not enough for ESD AND CDE

  5. Circuit 2

  6. DM model 1.) the circuit shows that the SRV05-4 is short to GND , when the surge is DM model , so the circuit can protect the IC away from DM model surge.

  7. CM model 1.) the ESD and CDE are the CM model , so the SRV05-4 will do work because it is connected to GND . 2. The transformer also supply the 1500V isolation

  8. RJ45 ICM IC Discrete design When ESD occurs , the blue wire will bring out inductance and it will result VB=LB * di/dt. 2.) the red wire will bring out inductance and it also result VR=LR* di/dt caused by ESD and VB higher than ESD only 3.) the VIC= VC + VR may be is higher than the IC ESD degree.

  9. RJ45 with ESD device ICM IC Integrated design When ESD occur , the VIC= VC is less than the IC ESD degree.

  10. conclusion 1.Thinking of HI-POT , DM model and CM model, the ESD device is best between the transformer and PHY side in our RJ45 ICM product . 2.the integrated design is better than the discrete design 3.the design method is same to 1000base type .

More Related