1 / 18

CFD Simulation: MEXICO Rotor Wake

CFD Simulation: MEXICO Rotor Wake. EWEC: 2009 Andreas Bechmann & Niels Sørensen Risø DTU ∙ National Laboratory for Sustainable Energy andh@risoe.dtu.dk. Outline:. Background MEXICO Experiment CFD Simulations Conclusion. Background 1/3.

lula
Télécharger la présentation

CFD Simulation: MEXICO Rotor Wake

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CFD Simulation: MEXICO Rotor Wake EWEC: 2009 Andreas Bechmann & Niels Sørensen Risø DTU ∙ National Laboratory for Sustainable Energy andh@risoe.dtu.dk

  2. Outline: • Background • MEXICO Experiment • CFD Simulations • Conclusion CFD Simulation of the MEXICO Rotor Wake

  3. Background 1/3 “Today, siting of wind turbines in wind farms is based on power output considerations” TOPFARM project: Optimization of wind farm topology based on power output and turbine loads. WP1: Internal flow model Model to describe the flow inside the wind farm CFD Simulation of the MEXICO Rotor Wake

  4. Background 2/3 How to validate the model? Wind farm Single wind turbine Wind tunnel CFD Simulation of the MEXICO Rotor Wake

  5. Background 3/3 • The MEXICO Experiment • Controlled conditions • PIV measure. 1.3D downstream • Open wind tunnel – tunnel effects? Objectives: To make a “clean” dataset for validating wake models Method: Extract wake data from the MEXICO experiment Compare measurements with high resolution CFD Combine measurements and CFD results in a dataset for validating wake models Wind tunnel CFD Simulation of the MEXICO Rotor Wake

  6. Outline: • Background • MEXICO Experiment • CFD Simulations • Conclusion Title of the presentation

  7. MEXICO Exp. 1/4 MEXICO Info: (pictures by ECN, NLR) Model Experiments in Controlled Conditions Purpose: ”measurements on wind turbine model including the near wake” Large tunnel of DNW used Many groups participated: ECN was coordinator The Vindtunnel: Open section 9.5×9.5m Max. air speed 30 m/s Balance (3 forces/moments) CFD Simulation of the MEXICO Rotor Wake

  8. MEXICO Exp. 2/4 The Rotor: 4.5m diameter 3 airfoils for each blade: 1. Root: DU 91-W2-250 2. Mid: RISØ A1-21 3. Tip: NACA 63-418 Zig-zag tape at 5% chord Pitch angle -2.3 degrees No signal from strain gages? (global rotor forces are estimated from the balance) Pressure at 5 sections (25%,35%,60%,82%,95%) CFD Simulation of the MEXICO Rotor Wake

  9. MEXICO Exp. 3/4 Earlier CFD findings • 1/10 scale of DNW wind tunnel • Clear tunnel effects in the far wake • Tunnel effects limited at the rotor Niels N. Sørensen, Risø/DTU MEXICO, 3. Progress Meeting, Athens 28-29 Nov. 2001 Doeke Rozendal Flow field measurements on a small scale wind turbine model in the DNW PLST wind tunnel NLR-CR-2003-485 The PIV measurements: • PIV measuring sheet (34×40cm) placed horizontally at 270 deg azimuth • In phase with rotor (freq=3 rotor revolutions) for 40s (100 samples) • Axial traverse at r/R=0.82 • Radial traverses from r/R=0.5-0.9 -0.6D -0.4D 0.3D 1.0D -1.0D 1.3D CFD Simulation of the MEXICO Rotor Wake

  10. MEXICO Exp. 4/4 Selected data: 100 GB of data Axi-symmetric cond. No yaw Pitch angle -2.3 degree 425 rpm (tip speed 100m/s) Wind speed: 10, 15, 24 m/s (tip speed ratio 10, 6.7, 4.2) CFD Simulation of the MEXICO Rotor Wake

  11. Outline: • Background • MEXICO Experiment • CFD Simulations • Conclusion CFD Simulation of the MEXICO Rotor Wake

  12. The Simulations 1/5 CFD solver: EllipSys3D RANS: SST k-ω model Fully turbulent Steady-state simulations Surface mesh: All 3 blades meshed 256×64 cells on each Volume mesh: 256 cells in normal direction (~7 rotor diameters) Wake resolved approx 3D Wind tunnel is not included CFD Simulation of the MEXICO Rotor Wake

  13. The Simulations 2/5 Rotor forces: Thrust. Estimated tower drag subtracted from balance force Pressure distributions. CFD Simulation of the MEXICO Rotor Wake

  14. The Simulations 3/5 CFD Simulation of the MEXICO Rotor Wake

  15. The Simulations 4/5 Wake results: -0.6D -0.4D 0.3D 1.0D -1.0D 1.3D CFD Simulation of the MEXICO Rotor Wake

  16. The Simulations 5/5 Validation dataset : Tunnel effects removed Expands further downstream Airfoil characteristics has been extracted which includes 3D effects CFD Simulation of the MEXICO Rotor Wake

  17. Outline: • Background • MEXICO Experiment • CFD Simulations • Conclusions CFD Simulation of the MEXICO Rotor Wake

  18. Conclusions • Wake data extracted from MEXICO database • CFD simulations of MEXICO wake were performed • Measurements and simulations compare well • Only the near-wake was simulated (~3D) (due to mesh topology) • Simulations with laminar–turbulent transition could be interesting • A new validation dataset for wake models without tunnel effects Thank you for listening! CFD Simulation of the MEXICO Rotor Wake

More Related