1 / 5

TDR Plan for Cavity Integration: Issues and Clear Definitions in Design Specifications

This document addresses the key issues in the Technical Design Report (TDR) for cavity integration, emphasizing the need for clear definitions of baseline and plug-compatible designs. It details crucial components such as input couplers, tuner mechanisms (blade and slide-jack designs), and the integration of magnetic shields within and outside the Helium vessel. The TDR chapter covers specifications for assembly procedures, instrumentation, and operation, providing essential guidance for cost estimation and fabrication processes.

magee-sandoval
Télécharger la présentation

TDR Plan for Cavity Integration: Issues and Clear Definitions in Design Specifications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TDR plan for cavity integration H. Hayano

  2. Issues of TDR writing Need clear definition of What is the baseline design, what is the plug-compatible design Input coupler TTF-III coupler : Baseline Design KEK coupler : Plug-compatible design (2) Tuner blade tuner : ??? slide-jack tuner : ??? (motor inside/outside) (3) Magnetic shield outside of He vessel : Baseline Design inside of He vessel : Plug-compatible design

  3. TDR chapter index (1) Input coupler (2) Tuner (3) He vessel and HPV-code (4) Magnetic shield (5) Integration assembly procedure (6) Instrumentation and control for cavity system (incl. LFD compensation) (7) Plug-compatibility concept for cavity integration (8) Plug-compatible design

  4. Required description : specification table drawings fabrication post-process (for vacuum, for RF, for heat treatment, etc. ) assembly procedure test procedure operation procedure Required work for : cost estimation according to the design description

  5. End

More Related