1 / 12

IT-100 Integration Module

IT-100 Integration Module. IT-100 - Overview. The IT-100 features a bi-directional RS-232 interface that accepts commands and sends event-driven or state-change commands to third-party applications, for example home automation or HVACS system. IT-100 – Specifications. Current Draw: 65mA

Télécharger la présentation

IT-100 Integration Module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IT-100Integration Module

  2. IT-100 - Overview The IT-100 features a bi-directional RS-232 interface that accepts commands and sends event-driven or state-change commands to third-party applications, for example home automation or HVACS system.

  3. IT-100 – Specifications Current Draw: 65mA Compatibility: All PowerSeries Mounting: Inside control panel cabinet or PC5003 cabinet

  4. Compatible with all PowerSeries control panels Bi-directional RS-232 interface Real-time zone status Fully programmable 4-wire hook-up to KEYBUS Enables third parties to perform virtual keypad functions Enables third parties to perform thermostat control functionality via the DSC Escort module IT-100 – Features

  5. IT-100 – Sample Configuration

  6. IT-100 – Module Overview RED, BLK, YEL, GRN: These terminals are used to connect the IT-100 to the Keybus of the control panel.

  7. IT-100 – Module Overview LED: This LED is used to indicate the current status of the IT-100.

  8. IT-100 – Module Overview DB9: This connection is used to wire the IT-100 to the third-party application. Note: a ‘straight-through’ RS-232 is required for this connection

  9. IT-100 – Additional Wiring Information The IT-100 includes a ferrite. Ensure that it is looped through the keybus (twice) and placed as close to the IT-100 as possible.

  10. IT-100 – LED Information

  11. IT-100 – Baud Rate Selection Baud Rate Selection: The baud rate of the IT-100 is selectable using a third party applications (default = 9600 baud).

  12. Q&A IT-100

More Related