1 / 15

POWER ELECTRONICS

بسم الله الرحمن الرحيم. The Islamic University of Gaza Faculty of Engineering Electrical Engineering Department. POWER ELECTRONICS . EELE 5450 — Summer 2012. Instructor: Eng. Jalal Al Roumy. Lecture 3. Chapter Two. Power Semiconductor Diodes.

marci
Télécharger la présentation

POWER ELECTRONICS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. بسم الله الرحمن الرحيم The Islamic University of Gaza Faculty of Engineering Electrical Engineering Department POWER ELECTRONICS EELE 5450— Summer 2012 Instructor: Eng. Jalal Al Roumy Lecture 3

  2. Chapter Two Power Semiconductor Diodes Power diodes have large power-, voltage-, current-handling capabilities than that of ordinary signal diodes.

  3. Chapter Two Power Diodes symbol and type of packaging

  4. Chapter Two Diode Characteristics

  5. Chapter Two • V-I characteristics • Forward-biased region • Reverse biased region • Breakdown region

  6. Chapter Two Shockley’s equation N=1,2( Germanium, Silicon) practically 1.1—1.8 VT= Thermal voltage IS= Saturation current

  7. Chapter Two Shockley diode equation

  8. Chapter Two Forward-bias VD>0

  9. Chapter Two Reverse-bias VD<0

  10. Chapter Two Reverse Recovery Characteristics Tb/Ta is the softness factor (SF)

  11. Chapter Two Power Diode Types • Ideally, a diode should have no reverse recovery time, However, the manufacturing cost of such diode will increase. • The power diodes can be classified into three categories: • Standard or general-purpose diodes • Fast-recovery diodes • Schottky diodes

  12. Chapter Two Standard or general-purpose diodes • Reverse recovery time= 25 us (relatively high). • Used in Low-speed applications. • Current rating : From less than 1 Ampere to several thousands of Amperes. • Voltage rating 50 v to 5 kV.

  13. Chapter Two Fast-Recovery Diodes • Reverse recovery time< 5 us ( Low). • Used in DC-DC and DC-AC converter circuit (high speed applications). • Current rating : From less than 1 Ampere to several hundreds of Amperes. • Voltage rating 50 v to 3 kV. • Platinum or gold.

  14. Chapter Two SchottkyDiodes • No minority carriers . • Recovered charge is much less than P-n junction diodes. • Used in high current and low voltage dc power supplies. • Current rating : From 1 Ampere to 300 Amperes. • Voltage rating <100 V.

  15. Chapter Two • The reverse recovery time of a diode is trr=3us and the rate of fall of the diode current is di/dt=30 A/us • Determine • (a) the storage charge Qrr • (b) Peak reverse current Irr End of Lecture

More Related