1 / 12

Remote Sensing and Modeling of the Georgia 2007 Fires

Remote Sensing and Modeling of the Georgia 2007 Fires. Eun-Su Yang, Sundar A. Christopher, Yuling Wu, Arastoo P. Biazar Earth System Science Center University of Alabama in Huntsville Shobha Kondragunta NOAA/NESDIS. Presentation to 2008 CMAS Conference October 7, 2008. Outline.

media
Télécharger la présentation

Remote Sensing and Modeling of the Georgia 2007 Fires

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Remote Sensing and Modeling of the Georgia 2007 Fires Eun-Su Yang, Sundar A. Christopher, Yuling Wu, Arastoo P. Biazar Earth System Science Center University of Alabama in Huntsville Shobha Kondragunta NOAA/NESDIS Presentation to 2008 CMAS Conference October 7, 2008

  2. Outline • Overview of the GA/FL fires in May 2007 • Fire emissions derived from satellite data • Air quality modeling approach • CMAQ simulations with local emissions • Simulations with local plus fire emissions • Evaluations with satellite and in-situ data • Summary

  3. Meteorological situation in May 2007 MM5: Surface pressure and wind NCEP 850 hPa Geopotential Height: http://www.cdc.noaa.gov/cdc/reanalysis Dry spring caused extensive wildfires in Georgia and Florida.

  4. Fires in May 22, 2007 MODIS Terra: 1615Z FLAMBE (upper) http://www.nrlmry.navy.mil/flambe/index.html (left) http://rapidfire.sci.gsfc.nasa.gov/realtime/2007142 Fire detection is near real time.

  5. Biomass Burning Emissions Emissions (kg) = (burned area)  GOES x (fuel load)  MODIS vegetation x (fraction of combustion)  AVHRR moisture x (fraction of emission)  AVHRR moisture Produces: PM2.5*, CO, N2O, NH3, SO2, CH4, NOX*, and TNMHC*. (*non-CBIV species) Biomass burning emissions are derived from (burned area).

  6. Contribution of local emission smoke plume or local emission? PM2.5 mass from one location in Birmingham, Alabama from April 1-May 31, 2007. The colors indicate various air quality categories ranging from Good to extremely unhealthy conditions. Background emissions could be important in urban areas.

  7. MM5/SMOKE/CMAQ Biogenic (BEIS3) Mobile (MOBILE6) Point, Area MM5/WRF SMOKE:Emission Inventory Model validation satellite and ground-based measurements: AOT, PM2.5 CMAQ input fire emissions Good Moderate Unhealthy for Sensitive Group Unhealthy Very Unhealthy Hazardous AQI Forecast:

  8. Modeling Approaches • CMAQ run for May 22-23. • 12-km grid. • 40 vertical layers: more layers near surface and tropopause. • Include BIOGENIC and MOBILE emissions for local emissions. • EBI solver, cb4-ae4-aq mechanism. • Fire emissions are uniformly distributed from surface to PBL.

  9. CMAQ simulations with local emissions

  10. AOT simulations with local & fire emissions There is big difference near the boundary of smoke plume.

  11. PM2.5 simulations with local & fire emissions Local emissions are ok, but fire emissions are overestimated.

  12. Summary • Fire emissions can be estimated near-real time satellite measurements. • Meteorological fields such as winds are important to precisely locate fire plumes. • The results are preliminary and, therefore, subject to change. • Fire emission rate are overestimated; need check consistency in unit.

More Related