1 / 92

# Rotating objects tend to keep rotating while non-rotating objects tend to remain non-rotating.

Rotating objects tend to keep rotating while non-rotating objects tend to remain non-rotating. In the absence of an external force, the momentum of an object remains unchanged—conservation of momentum. In this chapter we extend the law of momentum conservation to rotation.

Télécharger la présentation

## Rotating objects tend to keep rotating while non-rotating objects tend to remain non-rotating.

E N D

### Presentation Transcript

1. Rotating objects tend to keep rotating while non-rotating objects tend to remain non-rotating.

2. In the absence of an external force, the momentum of an object remains unchanged—conservation of momentum. In this chapter we extend the law of momentum conservation to rotation.

3. 12.1Rotational Inertia The greater the rotational inertia, the more difficult it is to change the rotational speed of an object.

4. 12.1Rotational Inertia Newton’s first law, the law of inertia, applies to rotating objects. • An object rotating about an internal axis tends to keep rotating about that axis. • Rotating objects tend to keep rotating, while non-rotating objects tend to remain non-rotating. • The resistance of an object to changes in its rotational motion is called rotational inertia (sometimes moment of inertia).

5. 12.1Rotational Inertia Just as it takes a force to change the linear state of motion of an object, a torque is required to change the rotational state of motion of an object. In the absence of a net torque, a rotating object keeps rotating, while a non-rotating object stays non-rotating.

6. 12.1Rotational Inertia Like inertia in the linear sense, rotational inertia depends on mass, but unlike inertia, rotational inertia depends on the distribution of the mass. The greater the distance between an object’s mass concentration and the axis of rotation, the greater the rotational inertia. Rotational Inertia and Mass

7. 12.1Rotational Inertia Rotational inertia depends on the distance of mass from the axis of rotation.

8. 12.1Rotational Inertia By holding a long pole, the tightrope walker increases his rotational inertia.

9. 12.1Rotational Inertia A long baseball bat held near its thinner end has more rotational inertia than a short bat of the same mass. • Once moving, it has a greater tendency to keep moving, but it is harder to bring it up to speed. • Baseball players sometimes “choke up” on a bat to reduce its rotational inertia, which makes it easier to bring up to speed. A bat held at its end, or a long bat, doesn’t swing as readily.

10. 12.1Rotational Inertia The short pendulum will swing back and forth more frequently than the long pendulum.

11. 12.1Rotational Inertia For similar mass distributions, short legs have less rotational inertia than long legs.

12. 12.1Rotational Inertia The rotational inertia of an object is not necessarily a fixed quantity. It is greater when the mass within the object is extended from the axis of rotation.

13. 12.1Rotational Inertia You bend your legs when you run to reduce their rotational inertia. Bent legs are easier to swing back and forth.

14. 12.1Rotational Inertia When all the mass m of an object is concentrated at the same distance r from a rotational axis, then the rotational inertia is I = mr2. When the mass is more spread out, the rotational inertia is less and the formula is different. Formulas for Rotational Inertia

15. 12.1Rotational Inertia Rotational inertias of various objects are different. (It is not important for you to learn these values, but you can see how they vary with the shape and axis.)

16. 12.1Rotational Inertia think! When swinging your leg from your hip, why is the rotational inertia of the leg less when it is bent?

17. 12.1Rotational Inertia think! When swinging your leg from your hip, why is the rotational inertia of the leg less when it is bent?Answer: The rotational inertia of any object is less when its mass is concentrated closer to the axis of rotation. Can you see that a bent leg satisfies this requirement?

18. 12.1Rotational Inertia How does rotational inertia affect how easily the rotational speed of an object changes?

19. 12.2Rotational Inertia and Gymnastics The three principal axes of rotation in the human body are the longitudinal axis, the transverse axis, and the medial axis.

20. 12.2Rotational Inertia and Gymnastics The human body can rotate freely about three principal axes of rotation. Each of these axes is at right angles to the others and passes through the center of gravity. The rotational inertia of the body differs about each axis.

21. 12.2Rotational Inertia and Gymnastics The human body has three principal axes of rotation.

22. 12.2Rotational Inertia and Gymnastics Rotational inertia is least about the longitudinal axis, which is the vertical head-to-toe axis, because most of the mass is concentrated along this axis. • A rotation of your body about your longitudinal axis is the easiest rotation to perform. • Rotational inertia is increased by simply extending a leg or the arms. Longitudinal Axis

23. 12.2Rotational Inertia and Gymnastics An ice skater rotates around her longitudinal axis when going into a spin. • The skater has the least amount of rotational inertia when her arms are tucked in.

24. 12.2Rotational Inertia and Gymnastics An ice skater rotates around her longitudinal axis when going into a spin. • The skater has the least amount of rotational inertia when her arms are tucked in. • The rotational inertia when both arms are extended is about three times more than in the tucked position.

25. 12.2Rotational Inertia and Gymnastics c and d. With your leg and arms extended, you can vary your spin rate by as much as six times.

26. 12.2Rotational Inertia and Gymnastics You rotate about your transverse axis when you perform a somersault or a flip. Transverse Axis

27. 12.2Rotational Inertia and Gymnastics A flip involves rotation about the transverse axis. • Rotational inertia is least in the tuck position.

28. 12.2Rotational Inertia and Gymnastics A flip involves rotation about the transverse axis. • Rotational inertia is least in the tuck position. • Rotational inertia is 1.5 times greater.

29. 12.2Rotational Inertia and Gymnastics A flip involves rotation about the transverse axis. • Rotational inertia is least in the tuck position. • Rotational inertia is 1.5 times greater. • Rotational inertia is 3 times greater.

30. 12.2Rotational Inertia and Gymnastics A flip involves rotation about the transverse axis. • Rotational inertia is least in the tuck position. • Rotational inertia is 1.5 times greater. • Rotational inertia is 3 times greater. • Rotational inertia is 5 times greater than in the tuck position.

31. 12.2Rotational Inertia and Gymnastics Rotational inertia is greater when the axis is through the hands, such as when doing a somersault on the floor or swinging from a horizontal bar with your body fully extended.

32. 12.2Rotational Inertia and Gymnastics The rotational inertia of a body is with respect to the rotational axis. • The gymnast has the greatest rotational inertia when she pivots about the bar.

33. 12.2Rotational Inertia and Gymnastics The rotational inertia of a body is with respect to the rotational axis. • The gymnast has the greatest rotational inertia when she pivots about the bar. • The axis of rotation changes from the bar to a line through her center of gravity when she somersaults in the tuck position.

34. 12.2Rotational Inertia and Gymnastics The rotational inertia of a gymnast is up to 20 times greater when she is swinging in a fully extended position from a horizontal bar than after dismount when she somersaults in the tuck position. Rotation transfers from one axis to another, from the bar to a line through her center of gravity, and she automatically increases her rate of rotation by up to 20 times. This is how she is able to complete two or three somersaults before contact with the ground.

35. 12.2Rotational Inertia and Gymnastics The third axis of rotation for the human body is the front-to-back axis, or medial axis. This is a less common axis of rotation and is used in executing a cartwheel. Medial Axis

36. 12.2Rotational Inertia and Gymnastics What are the three principal axes of rotation in the human body?

37. 12.3Rotational Inertia and Rolling Objects of the same shape but different sizes accelerate equally when rolled down an incline.

38. 12.3Rotational Inertia and Rolling Which will roll down an incline with greater acceleration, a hollow cylinder or a solid cylinder of the same mass and radius? The answer is the cylinder with the smaller rotational inertia because the cylinder with the greater rotational inertia requires more time to get rolling.

39. 12.3Rotational Inertia and Rolling Inertia of any kind is a measure of “laziness.” The cylinder with its mass concentrated farthest from the axis of rotation—the hollow cylinder—has the greater rotational inertia. The solid cylinder will roll with greater acceleration.

40. 12.3Rotational Inertia and Rolling Any solid cylinder will roll down an incline with more acceleration than any hollow cylinder, regardless of mass or radius. A hollow cylinder has more “laziness per mass” than a solid cylinder.

41. 12.3Rotational Inertia and Rolling A solid cylinder rolls down an incline faster than a hollow one, whether or not they have the same mass or diameter.

42. 12.3Rotational Inertia and Rolling think! A heavy iron cylinder and a light wooden cylinder, similar in shape, roll down an incline. Which will have more acceleration?

43. 12.3Rotational Inertia and Rolling think! A heavy iron cylinder and a light wooden cylinder, similar in shape, roll down an incline. Which will have more acceleration?Answer: The cylinders have different masses, but the same rotational inertia per mass, so both will accelerate equally down the incline. Their different masses make no difference, just as the acceleration of free fall is not affected by different masses. All objects of the same shape have the same “laziness per mass” ratio.

44. 12.3Rotational Inertia and Rolling think! Would you expect the rotational inertia of a hollow sphere about its center to be greater or less than the rotational inertia of a solid sphere? Defend your answer.

45. 12.3Rotational Inertia and Rolling think! Would you expect the rotational inertia of a hollow sphere about its center to be greater or less than the rotational inertia of a solid sphere? Defend your answer.Answer: Greater. Just as the value for a hoop’s rotational inertia is greater than a solid cylinder’s, the rotational inertia of a hollow sphere would be greater than that of a same-mass solid sphere for the same reason: the mass of the hollow sphere is farther from the center.

46. 12.3Rotational Inertia and Rolling What happens when objects of the same shape but different sizes are rolled down an incline?

47. 12.4Angular Momentum Newton’s first law of inertia for rotating systems states that an object or system of objects will maintain its angular momentum unless acted upon by an unbalanced external torque.

48. 12.4Angular Momentum Anything that rotates keeps on rotating until something stops it. Angular momentum is defined as the product of rotational inertia, I, and rotational velocity, . angular momentum = rotational inertia × rotational velocity () = I × 

49. 12.4Angular Momentum Like linear momentum, angular momentum is a vector quantity and has direction as well as magnitude. • When a direction is assigned to rotational speed, we call it rotational velocity. • Rotational velocity is a vector whose magnitude is the rotational speed.

50. 12.4Angular Momentum Angular momentum depends on rotational velocity and rotational inertia.

More Related