1 / 2

Rotary Table

Mount for mill table. Clamps. Uses/ Purpose: Cutting Circular Grooves Circular hole patterns Angled Cuts. Rotary Table. Setup: 1. Mount the rotary table to the mill table 2. Find the center of the rotary table using Dial Indicator and set X and Y to zero on read out.

miya
Télécharger la présentation

Rotary Table

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mount for mill table • Clamps • Uses/ Purpose: • Cutting Circular Grooves • Circular hole patterns • Angled Cuts Rotary Table Setup: 1. Mount the rotary table to the mill table 2. Find the center of the rotary table using Dial Indicator and set X and Y to zero on read out. 3. Position material to find the true center using a dial indicator or a wiggler with respect to the center of the rotary table. 4. Mount the material to the rotary table using proper clamping equipment. 5. Reference a zero axis using the dial indicator on the rotary table. • Lock Location: • Clamp Setup

  2. Reading the Dial: • 1. Read the degree dial to get the number of full degrees rotated. • 2. Use the Min. and Sec. dial to get an exact value of degrees. • Notes: • One full Rotation of Crank equals 4 degrees. • The resolution is 15 seconds. • Zero Mark Sec. • Zero Reference Point • Minutes • Seconds • Adjustment Tab • Precautions: • Make Sure the Table is Properly fastened and locked down. • Make sure material is properly centered and clamped down. • Make sure the true zero is documented. • Andy Florence • Bryan Riga • 2008 • Zero Mark Minutes • Degree Indicator • Rotary Table dial indicator

More Related