1 / 27

Lecture 1: Energy and Enthalpy

Lecture 1: Energy and Enthalpy. Reading: Zumdahl 9.1 and 9.2 Outline Energy: Kinetic and Potential System vs. Surroundings Heat, Work, and Energy Enthalpy. Energy is the capacity to do work or to produce heat

ojal
Télécharger la présentation

Lecture 1: Energy and Enthalpy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 1: Energy and Enthalpy • Reading: Zumdahl 9.1 and 9.2 • Outline • Energy: Kinetic and Potential • System vs. Surroundings • Heat, Work, and Energy • Enthalpy

  2. Energy is the capacity to do work or to produce heat • Energy is conserved, it can neither be created nor destroyed, different forms of energy interconvert • However, the capacity to utilize energy to do work is limited (entropy)

  3. Energy: Kinetic vs. Potential • Potential Energy (PE) • Energy due to position or chemical composition • Equals (mgh) in example. • Kinetic Energy (KE) • Energy due to motion. • Equals mv2/2 in example.

  4. Mechanical Energy = KE + PE • Energy is the sum of kinetic energy and potential energy. • Energy is readily interconverted between these two forms. • If the system of interest is isolated (no exchange with surroundings), then total energy is constant.

  5. Example: Mass on a Spring • Initial PE = 1/2 kx2 • At x = 0: • PE = 0 • KE = 1/2mv2=1/2kx2 • Units of Energy Joule = kg.m2/s2 • Example: • Init. PE = 10 J • M = 10 kg • Vmax = [2(PE)/M]1/2 = 1.4m/s 0

  6. Energy: Kinetic vs. Potential • Potential Energy (PE) • Energy due to position or chemical composition • Equals (mgh) in example. • Kinetic Energy (KE) • Energy due to motion. • Equals mv2/2 in example.

  7. First Law: Energy of the Universe is Constant E = q + w q = heat. Transferred between two bodies of differing temperature. Note: q ≠ Temp! w = work. Force acting over a distance (F x d) First Law of Thermodynamics

  8. Applying the First Law • Need to differentiate between the system and surroundings. • System: That part of the universe you are interested in (i.e., you define it). • Surroundings: The rest of the universe.

  9. Conservation of Energy • Total energy is conserved. • Energy gained by the system must be lost by the surroundings. • Energy exchange can be in the form of q, w, or both.

  10. Heat Exchange: Exothermic • Exothermic Reaction. Chemical process in which system evolves resulting in heat transfer to the surroundings • Heat flows out of the system • q < 0 (heat is lost)

  11. Another Example of Exothermic

  12. Heat Exchange: Endothermic • Endothermic Reaction: Chemical process in which system evolves resulting in heat transfer to the system • Heat flows to the system • q > 0 (heat is gained)

  13. Another Example of Endothermic

  14. In exothermic reactions, the potential energy stored in chemical bonds is converted into thermal energy (random kinetic energy), i.e. heat • Once we have done that, we have lost the ability to utilize the same potential energy to do work or generate heat again (dissipation)

  15. Energy and Sign Convention • If system loses energy: Efinal < Einitial Efinal-Einitial = DE < 0. • If system gains energy: Efinal > Einitial Efinal-Einitial = DE > 0.

  16. If system gives heat q < 0 (q is negative) If system gets heat q > 0 (q is positive) Heat and Work Sign Convention • If system does work • w < 0 (w is negative) • If work done on system • w > 0 (w is positive)

  17. Example: Piston • Figure 9.4, expansion against a constant external pressure • No heat exchange: q = 0 • System does work: w < 0 (adiabatic)

  18. Example (cont.) • How much work does the system do? • Pext = force/area • |w| = force x distance = Pext x A x Dh = PextDV • w = - PextDV (note sign)

  19. When it is compressed, work is done to a gas • When it is expanded, work is done by the gas (e.g. your car’s engine)

  20. Example 9.1 • A balloon is inflated from 4 x 106 l to 4.5 x 106 l by the addition of 1.3 x 108 J of heat. If the balloon expands against an external pressure of 1 atm, what is DE for this process? • Ans: First, define the system: the balloon.

  21. Example 9.1 (cont.) DE = q + w = (1.3 x 108 J) + (-PDV) = (1.3 x 108 J) + (-1 atm (Vfinal - Vinit)) = (1.3 x 108 J) + (-0.5 x 106 l.atm) • Conversion: 101.3 J per l x atm (-0.5 x 106 l.atm) x (101.3 J/l.atm) = -5.1 x 107 J

  22. Example 9.1 (cont.) DE = (1.3 x 108 J) + (-5.1 x 107 J) = 8 x 107 J (Ans.) The system gained more energy through heat than it lost doing work. Therefore, the overall energy of the system has increased.

  23. Definition of Enthalpy • Thermodynamic Definition of Enthalpy (H): H = E + PV E = energy of the system P = pressure of the system V = volume of the system

  24. Why we need Enthalpy? • Consider a process carried out at constant pressure. • If work is of the form D(PV), then: DE = qp + w = qp - PDV DE + PDV = qp qp is heat transferred at constant pressure.

  25. Definition of Enthalpy (cont.) • Recall: H = E + PV DH = DE + D(PV) = DE + PDV (P is constant) = qp • Or DH = qp • The change in enthalpy is equal to the heat transferred at constant pressure.

  26. Changes in Enthalpy • Consider the following expression for a chemical process: DH = Hproducts - Hreactants If DH >0, then qp >0. The reaction is endothermic If DH <0, then qp <0. The reaction is exothermic

  27. Enthalpy Changes Pictorially • Similar to previous discussion for Energy. • Heat comes out of system, enthalpy decreases (ex. Cooling water). • Heat goes in, enthalpy increases (ex. Heating water)

More Related