1 / 7

SECME – Balsa Bridges

SECME – Balsa Bridges. Presented By: Michael Olka P.E. What are the teams responsible for building?. The superstructure only. The support is supplied at the testing site. Balsa Size Restrictions. Maximum Member cross section is ¼” by ¼”.

palti
Télécharger la présentation

SECME – Balsa Bridges

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SECME – Balsa Bridges Presented By: Michael Olka P.E.

  2. What are the teams responsible for building? • The superstructure only • The support is supplied at the testing site

  3. Balsa Size Restrictions • Maximum Member cross section is ¼” by ¼”. • Students are allowed to laminate smaller members to create larger ones, however this “built-up” section may not exceed ¼” by ¼”. ¼” ¼” ¼” ¼”

  4. The Supplied Support 38 cm 10 cm 6 cm

  5. Testing Machine Leave the center open

  6. Ranking of Bridges • The Bridges are ranked according to the Strength to Weight Ratio. Not the Maximum Load. Load Ratio Weight *The higher the ratio the more efficient the bridge.*

  7. Example of the Ratio Bridge A: Weight: 100g Load: 45,359g (100lbs) Bridge B: Weight: 50g Load: 27,215g (60lbs) SWR: 544.31 SWR: 453.59 Bridge B wins!

More Related