1 / 10

Fuel Quality

Fuel Quality. Richard Nelson National Biodiesel Board. ASTM D 6751 – Biodiesel Fuel Specification. Fuel quality is of the utmost concern and importance to the biodiesel industry. ASTM specifications set the “gold standard” for materials, fuels, safety, new product testing, etc.

raya-hutchinson
Télécharger la présentation

Fuel Quality

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fuel Quality Richard Nelson National Biodiesel Board

  2. ASTM D 6751– Biodiesel Fuel Specification • Fuel quality is of the utmost concern and importance to the biodiesel industry. • ASTM specifications set the “gold standard” for materials, fuels, safety, new product testing, etc. • ASTM D 6751 is the specification for biodiesel fuels irrespective of the feedstock source and/or processing method. • Standard ensures that biodiesel has the fuel properties for safe operationin a compression ignition engine and ensures that poor processing has not contaminated the fuel with other products that would create engine damage.

  3. FUEL QUALITY • Fuel quality is of the utmost concern and importance to the biodiesel industry. • ASTM D 6751 is the specification for biodiesel fuels irrespective of the feedstock source and/or processing method. • National Quality Program (BQ-9000) Launched for Biodiesel Marketers and Producers • Look for BQ-9000 Certified Marketers: Biodiesel’s ‘Good Housekeeping’ Seal of Approval • Assures “cradle-to-grave” fuel quality “cradle” “grave”

  4. Critical Quality Parameters – Biodiesel Production • Complete Reaction • Removal of Glycerin • Removal of Catalyst • Removal of Alcohol • Absence of free fatty acids

  5. B100 meeting D 6751 Critical • If B100 meets D 6751, then most blends of B20 or lower will meet D 975 parameters • OEM’s are becoming increasingly comfortable with B20 • Almost all problems in the field are from B100 that didn’t meet D 6751 • Minnesota problems were from out of spec fuel • Its impossible to tell if B100 met spec once it is in blended form, so testing must occur at B100 level • NBB has active program to encourage enforcement of B100 compliance with D 6751

  6. The Downstream Distributor Should: • Only accept ASTM D 6751 biodiesel – check for COA. • Buy from a BQ 9000 Certified Producer or Marketer. • Understand fuel handling characteristics of both distillate and biodiesel fuel. • Become knowledgeable about biodiesel benefits and prepare to convey them to the consumer.

  7. Biodiesel cleaning effect • B20 has a cleaning effect on tanks and fuel systems when first used. • Fuel filters may need to be changed when switching to B20 for the first time. This happens about 2% of the time. After the system is clean, filter changes go back to normal • B2 has not exhibited this cleaning effect • The cleaning effect is more dramatic as the blend level goes up

  8. Protecting Your Fuel • Review fuel analysis reports • If fuels fail to meet the specification, notify your fuel supplier immediately • Retain samples for analysis • Have an independent testing laboratory on your team

  9. Going over B20 requires caution • Cold flow • Materials compatibility • Cleaning effect • Fuel Stability a bigger concern • Lower BTU content becomes noticeable • Engine oil may become diluted with fuel • Not supported by OEM’s http://www.biodiesel.org/pdf_files/Biodiesel_Blends_Above%20_20_Final.pdf

  10. B100 Quality versus Current Specifications • 16 of 32 B100 samples fail the specifications – 50% failure rate • The failure rate increases if B99 samples are included (21 out of 38 fail) • 1% diesel fuel may cause flashpoint below 130ºC • Typically failing for total glycerin or flash point • 6 failed multiple properties and 2 samples failed 3 properties *B99 samples not tested by D6584

More Related