1 / 26

Software (introduction), Data Representation

Department of Computer Science Faculty of Civil Engineering, Brno University of Technology. Information Technology 2. Software (introduction), Data Representation. Basic Definitions. Algorithm – a finite ordered set of well-defined rules for the solution of a problem.

rlivingston
Télécharger la présentation

Software (introduction), Data Representation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Department of Computer Science Faculty of Civil Engineering, Brno University of Technology Information Technology 2 Software (introduction), Data Representation

  2. Basic Definitions • Algorithm– a finite ordered set of well-defined rules for the solution of a problem. • Program – a specific set of ordered operations for a computer to perform. • Programming language – an artificial language for expressing programs (Pascal, C, C++, Java, VisualBasic, Fortran, …). • Instruction– order given to a computer processor by a computer program. • Assembly language – the native language of a microprocessor.

  3. Algorithm The word algorithm derives from the name of theArabic mathematician Abu Ja'far Muhammad ibn Musa al-Khwarizmi (about 780 – 850). Al-Khwarizmi wrote on Hindu-Arabicnumerals and was the first to use zero as a place holder in positional base notation. There are two standard ways to represent an algorithm: pseudocode and flowchart.

  4. Flowchart– an example PROBLEM SOLVINGFLOWCHART Does the thing work? YES NO Did you messwith it? Don‘t mess with it YES NO You fool Will you catchhell? NO Does anyone know? NO YES Trash it Hide it YES Has this beensuccessful? Can you blamesomeone else? NO NO You poor fool YES YES No problem

  5. Algorithm, Program (in C)– factorial START x! = 1  2  …  (x – 1)  x 5! = 1  2  3  4  5 = 120 a = 1 Flowchart f = 1 Corresponding C code: a  5 NO a = 1; f = 1; while (a <= 5) { f = f * a; a = a + 1; } YES STOP Program f = f · a a = a + 1 At the end of the program's execution, the variable f contains the value 120.

  6. Set of Assembly Language Instructions (dummy example) Register A Register B Register C Reg. Test LOADA mem - Load register A from memory address LOADB mem - Load register B from memory address CONB con - Load a constant value into register B SAVEB mem - Save register B to memory address SAVEC mem - Save register C to memory address ADD - Add A and B and store the result in C SUB - Subtract A and B and store the result in C MUL - Multiply A and B and store the result in C DIV - Divide A and B and store the result in C COM - Compare A and B and store the result in Test JUMP addr - Jump to an address JEQ addr - Jump, if equal, to address JNEQ addr - Jump, if not equal, to address JG addr - Jump, if greater than, to address JGE addr - Jump, if greater than or equal, to address JL addr - Jump, if less than, to address JLE addr - Jump, if less than or equal, to address STOP - Stop execution Memory

  7. Assembly Language – factorial A C compiler translates the C code into assembly language: // Assume a is at address 128 // Assume f is at address 129 0 CONB 1 // a = 1; 1 SAVEB 128 2 CONB 1 // f = 1; 3 SAVEB 129 4 LOADA 128 // if a > 5 then jump to 17 5 CONB 5 6 COM 7 JG 17 8 LOADA 129 // f = f * a; 9 LOADB 128 10 MUL 11 SAVEC 129 12 LOADA 128 // a = a + 1; 13 CONB 1 14 ADD 15 SAVEC 128 16 JUMP 4 // loop back to if 17 STOP (dummy example) a = 1; f = 1; while (a <= 5) { f = f * a; a = a + 1; }

  8. Data Representation • NUMERICAL DATA – NUMBERS • integers • real numbers • – fixed point – floating point • NONNUMERICAL DATA – CHARACTERS • string – sequence of characters

  9. Number Systems Each positive integer (natural number) can be writtenin the polynomial form anbn + an-1bn-1 + … + a0b0, wherebis an integer greater than 1 – the base (radix)of the number system, and coefficientsaiare natural numbers – the digitsof the number system, 0  ai  b.The shortened notation is usually used: (anan-1 … a0)b, or anan-1 … a0. To avoid confusion, we often use a suffix (subscript) to indicate the number base.

  10. Decimal Number System • base = 10 • uses ten digits (0, 1, 2, 3, 4, 5, 6, 7, 8, 9) • we are familiar with decimal number representation • numbers are expressed by ones (100),tens (101), hundreds (102), thousands (103),etc. • for example, the number6307can be expressed as: • 6 3 0 7 • 6 1000 + 3  100 + 0  10 + 7  1 • 6  103 + 3  102 +0  101 +7  100 = 6307, • thusa3b3 + a2b2 + a1b1 + a0b0, where b = 10 (base), • a0 = 7, a1 = 0, a2 = 3, a3 = 6, a4, a5, a6, … = 0 (digits)

  11. Binary Number System • base = 2 • uses two digits (0, 1) • in computers best used • the decimal number 11can be expressed as the binarynumber1011: • 1  23 + 0  22 +1  21 +1  20 • 1  8+ 0  4+1  2+1  1 = 11 … decimal • (1011)2 = (11)10

  12. Hexadecimal Number System • base = 16 • uses sixteen digits (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F), where letters A, B, C, D, E, Fcorrespond to numbers 10, 11, 12, 13, 14, 15 • used for convenience while using binary numbers • the decimal number967can be expressed asthe hexadecimal number3C7: • 3  162 +C  161 +7  160 • 3  256+12  16+7  1 = 967 … decimal • (3C7)16 = (967)10

  13. Conversions among Number Systems Example: Convert the decimal numbers 10 a 23 to binary. Divide the number by 2, then divide what's left by 2, and so on until there is nothing left (0). Write down the remainder (which is either 0 or 1) at each division stage. (10)10=(1010)2 (23)10=(10111)2

  14. Conversions among Number Systems Example: Convert the binary number 101110 to decimal. The binary number 101110 can be expressed as 1  25 + 0  24 + 1  23 + 1  22 +1  21 +0  20 1  32+ 0  16+ 1  8+ 1  4 +1  2+ 0  1 = 46 (101110)2 = (46)10

  15. Conversions among Number Systems Example: Convert the decimal number 586 to hexadecimal. First, convert the decimal number 586 to binary. Each hexadecimal digit represents 4 bits. Split the binary number into groups of 4 bits, starting from the right (the least significant) bit. Convert each group of 4 bitsinto the corresponding hexadecimal digit. … … … 10 = A, 11 = B, 12 = C, 13 = D, 14 = E, 15 = F.

  16. Conversions among Number Systems (586)10=(1001001010)2 10 0100 1010 0010 0100 1010 2 4 10 2 4 A (586)10=(24A)16

  17. Conversions among Number Systems Example: Convert the hexadecimal number 2AC7 to decimal. Express the number (2AC7)16in the form: 2  163 + A  162 +C  161 +7  160 2  163 + 10  162 +12  161 +7  160 2  4096+ 10  256 + 12  16+7  1 = 10951 (2AC7)16 = (10951)10 Hexadecimal numbers are often written in the form: 3BCh $2AF … in Turbo Pascal 0x7AF2… in C, JavaScript

  18. Conversions among Number Systems

  19. ASCII Table • American Standard Code for Information Interchange • a standard character set defined in 1968 (by ANSI) • in its original form 7-bit (27 = 128 characters),today 8-bit (28 = 256 characters) • only the first 128 characters (0 – 127) are common among all computers – basic part • the upper half of the ASCII table is dependent on regional settings (accented and additional characters) –so-called extended part (characters 128 – 255) • to enter a character that your PC keyboard does not have, while pressing down the left ALT key, enter the ASCII code with the number keys in the number key pad section. When you release the ALT key, the character is entered (character "@": ALT + 64).

  20. ASCII Table – Basic Part (0 – 127)

  21. ASCII tabulka – problémy s češtinou • pro češtinu existuje několik způsobů kódování (znakových sad): • ISO-8859-2 (ISO Latin 2) • Windows 1250 (CP1250) • CP852 (PC Latin 2) • bratří Kamenických • KOI8-CS • ... • všechny tyto znakové sady se liší horní polovinou ASCII tabulky (znaky 128 – 255) a nejsou tedy navzájem kompatibilní • další zajímavé informace naleznete na www.cestina.cz

  22. ASCII Table – Significancy • each character is re- presented as one byte • end of line – two characters: CR, LF • code page Windows 1250

  23. ASCII Art • making pictures using ASCII characters only • funny "ASCII-SMS" ASCII–SMS

  24. Unicode www.unicode.org • a 16-bit character encoding standard • contains all of the characters (216= 65536 different characters) in common use in the world’s written languages, including Russian, Japanese etc. • includes a large set of technical symbols, math operators and so on • problems with the backward (8-bit) compatibility

  25. Unicode – Significancy • in Notepad, select Unicode while saving the file • one character ~ two bytes

  26. References • Precht, M. – Meier, N. – Kleinlein, J.: EDV-Grundwissen: Eine Einführung in Theorie und Praxis der modernen EDV. Addison-Wesley, 1996. • Hlavenka, J. a kol.: Výkladový slovník výpočetní techniky a komunikací. Computer Press, Praha, 1997. • http://www.asciitable.com • http://www.unicode.org • http://www.cestina.cz

More Related