1 / 55

Chapter 5

Chapter 5. Root Locus. In previous lecture. Chapter 4 Routh Hurwitz Criterion Steady-state error analysis. Today’s plan. Construction of Root Locus. Learning Outcomes. At the end of this lecture, students should be able to: Sketch the root locus for a given system

rodneydawson
Télécharger la présentation

Chapter 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 5 Root Locus

  2. In previous lecture • Chapter 4 • Routh Hurwitz Criterion • Steady-state error analysis

  3. Today’s plan • Construction of Root Locus

  4. Learning Outcomes • At the end of this lecture, students should be able to: • Sketch the root locus for a given system • Identify the stability of a system using root-locus analysis

  5. Introduction • Root Locus illustrates how the poles of the closed-loop system vary with the closed-loop gain. • Graphically, the locus is the set of paths in the complex plane traced by the closed-loop poles as the root locus gain is varied from zero to infinity.

  6. R(s) C(s) K Gc + - H block diagram of the closed loop system given a forward-loop transfer function; KGc(s)H(s) where K is the root locus gain, and the corresponding closed-loop transfer function the root locus is the set of paths traced by the roots of 1 + KGc(s)H(s) =0 • as K varies from zero to infinity. As K changes, the solution to this equation changes.

  7. So basically, the root locus is sketch based on the characteristic equation of a given transfer function. Let say: Thus, the characteristic equation :

  8. Root locus starts from the characteristic equation. Split into 2 equations: Magnitude condition Angle condition where

  9. Remarks If Si is a root of the characteristic equation, then 1+G(s)H(s) = 0 OR Both the magnitude and Angle conditions must be satisfied If not satisfied Not part of root locus

  10. Example 1 0 -1 -2

  11. Let say my first search point, S1 S1 0 -1 -2 (A) Satisfy the angle condition FIRST (B) Magnitude condition to find K

  12. Let say the next search point 0 -1 -2 Check whether satisfy angle condition Since angle condition was not satisfied  not part of root locus

  13. CONSTRUCTION RULES OF ROOT LOCUS 8 RULES TO FOLLOW

  14. Construction Rules of Root Locus Assume Then

  15. Thus

  16. Rule 1 : When K = 0  Root at open loop poles • The R-L starts from open loop poles • The number of segments is equal to the number of open loop poles

  17. Rule 2: When K = ∞ • The R-L terminates (end) at the open loop zeros

  18. Rule 3: Real-axis segments On the real axis, for K > 0 the root locus exists to the left of an odd number of real-axis, finite open-loop poles and/or finite open-loop zeros Example 2 R-L doesn’t exist here R-L exist here R-L exist here

  19. Rule 4: Angle of asymptote NP = number of poles NZ = number of zeros

  20. Example 3 NP=3 NZ=0 Centroid

  21. Rule 5: Centroid From example 3 Recall Thus, -1

  22. Rule 6: Break away & break in points 0 0 -1 -1 -2 -2 Break away point Break in point How to find these points ?

  23. Differentiate K with respect to S & equate to zero How ? Solve for S  this value will either be the break away or break in point

  24. Let say Thus,

  25. Now, find Thus, So, notice that

  26. Example 4 Solution: 0 -1 -2

  27. Example 5 0 -1 -2 NP = 3 NZ = 0

  28. 0 -1 -2

  29. Break away point Invalid, why ???

  30. How to determine these values ? 0 -1 -2 -0.42

  31. From characteristic equation Construct the Routh array

  32. Since Force S1 row to zero or K=6 Replace K=6 into S2 row

  33. 0 -1 -2 -0.42

  34. Rule 7 : Angle of departure (arrival) Finding angles of departure and arrival from complex poles & zero Root locus start from open loop poles  Angle of departure Root locus terminates at open loop zeros  Angle of departure

  35. Angle of Departure

  36. Replace in this equation To make it easier to remember: Let’s change: and let k=0, we get Angles due to poles, keep using symbol θ Since Φp= Φp+360o Re-arrange Angles due to zeros, change to symbol β Thus, the angle of departure:

  37. Angle of Arrival

  38. Replace in this equation To make it easier to remember: Let’s change: and let k=0, we get Angles due to poles, keep using symbol θ Re-arrange Thus, the angle of arrival: Angles due to zeros, change to symbol β

  39. Angle of Departure Angle of Arrival

  40. Example 6 Step 1: Determine poles & zeros Np=3 Nz=0 poles at : Step 2: Maps poles & zeros on the s-plane 4 -3 0 -4

  41. Step 3: Calculate angle of asymptote

  42. Step 4: Determine centroid poles: Step 5: Sketch asymptotes line with dotted line 4 -3 -2 0 -4

  43. Step 6: Determine the break-away or break in points Complex numbers NO break away or break in points  only exist on real-axis of s-plane

  44. Step 7: Since complex poles exist, calculate the angle of departure 4 due to s=0 due to its complex conjugate -3 0 -4 How to determine θ?

  45. To determine θ 4 -3 0 Thus: -4 Angle of departure : -36.87o Cross Hair

  46. Step 8: Determine jω-crossing see RULE 8 : After this Step 9: Sketch the root locus -36.87o 4 Rule 8 -3 -2 0 -4 36.87o

  47. Rule 8 : R-L crosses jω-axis From Characteristic equation:

  48. Construct the Routh array

  49. Force row s1 to be zero, thus 150-K=0; K = 150 Substitute K = 150 into row s2 Since s = jω Thus

  50. Final Sketch 5 -36.87o 4 -3 -2 0 10 points -4 36.87o -5

More Related