1 / 4

METALS AND TYPE Creating logos and ligatures using metal tooling

METALS AND TYPE Creating logos and ligatures using metal tooling. Repousse ( reep -o- zay ). The process of repeatedly denting the metal with a dome shaped hammer from the back in order to created a shape in high relief. Ligatures.

ryder-ward
Télécharger la présentation

METALS AND TYPE Creating logos and ligatures using metal tooling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. METALS AND TYPE Creating logos and ligatures using metal tooling

  2. Repousse (reep-o-zay) The process of repeatedly denting the metal with a dome shaped hammer from the back in order to created a shape in high relief.

  3. Ligatures : a printed or written character (as æ or ƒƒ) consisting of two or more letters or characters joined together

  4. How-to STEP BY STEP BASIC TOOLING: 1) Place tooling metal on a pad or stack of news papers. 2) Place design on top of metal and trace outline of design. 3) Remove pattern and turn over the metal on pad. 4) Raise inside the design starting from the edge and working inward. 5) Turn metal over again and flatten background down. 6) Mount, frame and finish piece.

More Related