1 / 25

Subject Name: LINEAR INTEGRATED CIRCUITS Subject Code: 10EC46 Prepared By: M.PRIYADHARSINI

Subject Name: LINEAR INTEGRATED CIRCUITS Subject Code: 10EC46 Prepared By: M.PRIYADHARSINI Department: ECE Date: 6/03/2015. UNIT 7 VOLTAGE REGULATORS. TOPIC DETAILS Introduction Voltage Regulation Line Regulation Load Regulation Series Regulator Shunt Regulator IC Voltage Regulator

sdees
Télécharger la présentation

Subject Name: LINEAR INTEGRATED CIRCUITS Subject Code: 10EC46 Prepared By: M.PRIYADHARSINI

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Subject Name: LINEAR INTEGRATED CIRCUITS Subject Code: 10EC46 Prepared By: M.PRIYADHARSINI Department: ECE Date: 6/03/2015

  2. UNIT 7 VOLTAGE REGULATORS

  3. TOPIC DETAILS • Introduction • Voltage Regulation • Line Regulation • Load Regulation • Series Regulator • Shunt Regulator • IC Voltage Regulator • Switching Regulator

  4. INTRODUCTION • Batteries are often shown on a schematic diagram as the source of DC voltage but usually the actual DC voltage source is a power supply. • There are many types of power supply. Most are designed to convert high voltage AC mains electricity to a suitable low voltage supply for electronics circuits and other devices. • A more reliable method of obtaining DC power is to transform, rectify, filter and regulate an AC line voltage. • A power supply can by broken down into a series of blocks, each of which performs a particular function.

  5. Two basic categories of voltage regulation are: • line regulation • load regulation • The purpose of line regulation is to maintain a nearly constant output voltage when the input voltage varies. • The purpose of load regulation is to maintain a nearly constant output voltage when the load varies

  6. LINE REGULATION Line regulation: A change in input (line) voltage does not significantly affect the output voltage of a regulator (within certain limits)

  7. LINE REGULATION • Line regulation can be defined as the percentage change in the output voltage for a given change in the input voltage. • Line regulation calculated using the formula as Line regulation =(Δ VOUT/ Δ Vin)*100 Line regulation: A change in input (line) voltage does not significantly affect the output voltage of a regulator (within certain limits)

  8. LOAD REGULATION Load regulation: A change in load current (due to a varying RL) has practically no effect on the output voltage of a regulator (within certain limits)

  9. LOAD REGULATION Load regulation can be defined as the percentage change in the output voltage from no-load (NL) to full-load (FL). Load regulation = (VNL – VFL/ VFL)*100 where: VNL = the no-load output voltage VFL = the full-load output voltage

  10. TYPES OF REGULATORS Fundamental classes of voltage regulators are linear regulators and switching regulators. Two basic types of linear regulator are the series regulator and the shunt regulator . The series regulator is connected in series with the load and the shunt regulator is connected in parallel with the load.

  11. SERIES REGULATORS • Control element in series with load between input and output. • Output sample circuit senses a change in output voltage. • Error detector compares sample voltage with reference voltage → causes control element to compensate in order to maintain a constant output voltage.

  12. OP-AMP SERIES REGULATORS Control Element VREF Sample Circuit Error Detector

  13. OP-AMP SERIES REGULATORS • The resistor R1 and R2 sense a change in the output voltage and provide a feedback voltage. • The error detector compares the feedback voltage with a Zener diode reference voltage. • The resulting difference voltage causes the transistor Q1 controls the conduction to compensate the variation of the output voltage. • The output voltage will be maintained at a constant value of:

  14. IC REGULATORS • Regulation circuits in integrated circuit form are widely used. • Their operation is no different but they are treated as a single device with associated components. • These are generally three terminal devices that provide a positive or negative output. • Some types have variable voltage outputs. • A typical 7800 series voltage regulator is used for positive voltages. • The 7900 series are negative voltage regulators. • These voltage regulators when used with heatsinks can safely produce current values of 1A and greater. • The capacitors act as line filtration.

  15. IC REGULATORS • The fixed voltage regulator has an unregulated dc input voltage Vi applied to one input terminal, a regulated output dc voltage Vo from a second terminal, and the third terminal connected to ground. Fixed-Positive Voltage Regulator: • The series 78XX regulators are the three-terminal devices that provide a fixed positive output voltage.

  16. FIXED REGULATORS • An unregulated input voltage Vi is filtered by a capacitor C1 and connected to the IC’s IN terminal. • The IC’s OUT terminal provides a regulated +12 V, which is filtered by capacitor C2. • The third IC terminal is connected to ground (GND)

  17. FIXED VOLTAGE REGULATORS IC Part OUTPUT VOLTAGE • 7805 +5V • 7806 +6V • 7808 +8V • 7810 +10V • 7812 +12V • 7815 +15V • 7818 +18V • 7824 +24V Positive-VoltageRegulators in the 78XX Series

  18. FIXED VOLTAGE REGULATORS Fixed-Negative Voltage Regulator • The series 79XX regulators are the three-terminal IC regulators that provide a fixed negative output voltage. • This series has the same features and characteristics as the series 78XX regulators except the pin numbers are different.

  19. FIXED VOLTAGE REGULATORS IC Part OUTPUT VOLTAGE • 7905 -5V • 7906 -6V • 7908 -8V • 7909 -10V • 7912 -12V • 7915 -15V • 7918 -18V • 7924 -24V Negative Voltageregulators in the 79XX Series

  20. SWITCHED MODE POWER SUPPLY • Switching regulation is the technique by which an unregulated power is efficiently converted to regulated load power through the use of controlled switching devices. • Switching voltage regulators are used where it is required to supply a stable output voltage from a varying input voltage with a minimum power loss even under varying load conditions. • A simple switching regulator consists of a control switch (transistor), a low pass filter and sampling network etc..

  21. SWITCHED MODE POWER SUPPLY • In the circuit S is a transistor used as a control switch. It is switched between saturation and cut-off. • During ‘ON’ mode the switch is in saturation mode with negligible voltage drop across the collector and emitter terminals of the switch where as in ‘OFF’ mode the switch is in cut-off mode with negligible current through the collector and emitter terminals. • On the contrary the voltage-regulating switch, in a linear regulator circuit, always remains in the active region. • Due to this current is not passed continuously through the transistor and hence the power dissipation is reduced to minimum. • The transistor is switched ON and OFF by an electronic pulse width modulator. The filter circuit smoothens the output wave form and the sampling network (R1-R2) controls the duty cycle such that the output voltage remains constant.

  22. IC VOLTAGE REGULATORS • There are basically two kinds of IC voltage regulators: • Multipin type, e.g. LM723C • 3-pin type, e.g. 78/79XX • Multipin regulators are less popular but they provide the greatest flexibility and produce the highest quality voltage regulation • 3-pin types make regulator circuit design simple

  23. IC VOLTAGE REGULATORS • The LM723 has an equivalent circuit that contains most of the parts of the op-amp voltage regulator discussed earlier. • It has an internal voltage reference, error amplifier, pass transistor, and current limiter all in one IC package.

  24. IC VOLTAGE REGULATORS-HIGH VOLTAGE CONFIGURATION Design equations: Choose R1 + R2 = 10 kW, and Cc = 100 pF. External pass transistor and current sensing added in the circuit To make Vovariable,replace R1 with a pot.

  25. IC VOLTAGE REGULATORS-LOW VOLTAGE CONFIGURATION Design equations: IC 723 With external pass transistor and foldback current limiting Under foldback condition:

More Related