1 / 79

Horizontal Directional Drilling Training Course

Horizontal Directional Drilling Training Course. SAFETY. 2008. Emergency Procedures Electrical Strike Exposed Drill Rod Open Pit Danger Transporting Communication. HDD Safety. SAFETY. Show the Hole Boring Story Video. Emergency. Procedures. Emergency Procedures Section.

sequoia-lopez
Télécharger la présentation

Horizontal Directional Drilling Training Course

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Horizontal Directional Drilling Training Course SAFETY 2008

  2. Emergency Procedures Electrical Strike Exposed Drill Rod Open Pit Danger Transporting Communication HDD Safety SAFETY Show the Hole Boring Story Video

  3. Emergency Procedures

  4. Emergency Procedures Section

  5. Emergency Procedures Section Continued

  6. Emergency Procedures Section Continued

  7. Show HDD Safety Video

  8. Electrical Stike System

  9. It’s the Law! Call before you dig.

  10. Use Ditch Witch Electronics to Sweep for Live Power Before you Bore.

  11. Electrical Strike Section Continued

  12. Electrical Strike Section Electrical Strike System Current sends signal to indicator box Drill Rod Passes through Coil

  13. Electrical Strike Section Continued

  14. Electrical Strike Section SAFETY Continued

  15. Continued

  16. Electrical Strike Section Show Anatomy of a Strike Video

  17. Dangers of Exposed Drill Rod

  18. Drill Rod Safety Minimum Drill Rod Exposed Always! Continued

  19. Minimum Drill Rod Exposed Always! Less than 1-full Drill Rod Exposed Continued

  20. Minimum Drill Rod Exposed Always! Continued

  21. Drill Rod Safety Exposed Drill Rod Danger Continued

  22. Bend Radius & Set Back

  23. What Is Bend Radius?

  24. JT Power Pipe Fluid Miser Tube Pin Box Weld Pipe Body

  25. What Is RBF Testing? Rotational Bending Fatigue ROTATE

  26. Rig Alignment Rig Alignment Should be Checked and Adjusted.

  27. Check Saver Subs Daily Check for thread wear and rotary shoulder damage

  28. Life-Reducing Damage

  29. Spiral Gouging !

  30. Over-Tightening

  31. Improper tightening and Over Bending

  32. Over- Tightening Lack of tool joint compound

  33. Exceeding Bend Radius

  34. Tool Joints Outer Rotary Shoulder Inner Rotary Shoulder

  35. Inadequate Torque Pin carries the bending load Fretting from movement in the joint Shoulder separates when pipe is bent

  36. Drill Rod Safety Continued

  37. Drill Rod Safety Ditch Witch Drill Rod is tested to bend at a maximum percent pitch. Continued

  38. Drill Rod Safety Continued

  39. Drill Rod Safety Continued

  40. Drill Rod Safety Entry @ -24% requires 40’ to level off Show Drill Pipe Maintenance Video

  41. Dangers of Open Pits & DHT

  42. Open Pit Danger • Never enter “any” pit with live drill string (machine must be shut off!) • Keep all rigging to a minimum • Use proper slings, duct pullers, shackles and swivels. Continued

  43. Inspect Rigging for Wear Continued

  44. Swivels are directionaland require inspection & maintenance Watch Digging Dangers VIII Video

  45. Quick Wrenches & EZ Connect

  46. Quick Wrenches Continued

More Related