1 / 3

The APV Emulator (APVE)

Purpose of APVE... APVE protects the silicon strip tracker against buffer overflow and checks for sync loss in the front-end readout chip (APV25) Resets. The APV Emulator (APVE). Note. Set-up of APVE

sileas
Télécharger la présentation

The APV Emulator (APVE)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Purpose of APVE... APVE protects the silicon strip tracker against buffer overflow and checks for sync loss in the front-end readout chip (APV25) Resets... The APV Emulator (APVE) Calibration WG: Greg Iles (www.hep.ph.ic.ac.uk/~ilesgm)

  2. Note.... • Set-up of APVE • After a change in Tracker configuration it is necessary to write configuration parameters to the APVE via VME. • Hard reset should never be necessary, but........ • FPGA is loaded on VME power up. • FPGA and is reset on VME SYS_RESET* after power up. • Tracker configuration downloaded to APVE via VME. Calibration WG: Greg Iles (www.hep.ph.ic.ac.uk/~ilesgm)

  3. Control structure GTCS LTCS APVE TTCvi TTCex FMM Fast Merge Module TTCtx Reset & L1As FEC Fast control CCU Ring ? APV Pipeline address FED Calibration WG: Greg Iles (www.hep.ph.ic.ac.uk/~ilesgm)

More Related