1 / 53

Chapter 5

Chapter 5. Applications of Integration. 5.1. Areas Between Curves. 5.2 and 5.3. Finding Volumes of Objects. 5.2. Volume by Slicing. Disk Method (solid object, no hole). Practice example:. Washer Method (solid object, with hole). Practice example:. Both Disk and Washer

slade
Télécharger la présentation

Chapter 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 5 Applications of Integration

  2. 5.1 Areas Between Curves

  3. 5.2 and 5.3 Finding Volumes of Objects

  4. 5.2 Volume by Slicing

  5. Disk Method (solid object, no hole)

  6. Practice example:

  7. Washer Method (solid object, with hole)

  8. Practice example:

  9. Both Disk and Washer methods can also be used around the y-axis!

  10. (Washer) (Disk)

  11. 5.3 Volume by Shells

  12. For objects with or without holes:

  13. Add a series of “cylindrical shells”:

  14. More general: object not limited at the bottom by the x-axis

  15. Practice example:

  16. Example with shell about the x-axis: • Two cases: • R revolving about the x-axis • R revolving about the line y=-2.

  17. SUMMARY Disk & Washer about x-axis Disk & Washer about y-axis Shell about x-axis Shell about y-axis When to use what? Answer: It will depend on the shape and symmetry of the object.

  18. Often, more than one method can be used, but usually one would be easier than the other(s). Example: Volume of object using WASHER then SHELL (about x-axis). Ans: V = p/5

  19. 5.4 Physical Application: Work

  20. Example: Object moving along a straight line with a position function s (t), The force F on the object causing it to move (in the same direction) is the product of its mass m and its acceleration: (Newton’s Second Law of Motion) Units: (in SI metric system) the mass is measured in Kilograms (kg), the displacement in Meters (m), the time in Seconds (s) the force in Newtons (N) (So that: 1 N = 1 kgm/s2). the work in Joules (J) Work = total amount of effort required to perform a task Example: Work = (Force)  (Distance)W = Fd

  21. SI Units: If F is measured in newtons and d in meters, then the unit for W is a newton-meter, which is called a joule (J). US Units: If F is measured in pounds and d in feet, then the unit for W is a foot-pound (ft-lb), which is about 1.36 J. Conversion formula: 1 ft-lb = 1.36 J Units

  22. How much work is done in lifting a 1.2-kg book off the floor to put it on a desk that is 0.7 m high? Use the fact that the acceleration due to gravity is g = 9.8 m/s2. How much work is done in lifting a 20-lb weight 6 ft off the ground? Example 1: Work of a constant force:

  23. The force exerted is equal and opposite to that exerted by gravity, so F = mg = (1.2)(9.8) = 11.76 N And the work done is W = Fd = (11.76)(0.7)  8.2 J Example1(a) – Solution

  24. Here the force is given as F = 20 lb, so the work done is W = Fd = 20  6 = 120 ft-lb Notice that in part (b), unlike part (a), we did not have to multiply by g because we were given the weight (which is a force) and not the mass of the object. Example 1(b) – Solution cont’d

  25. The equation: W = F. d defines work as long as the force is constant What if the force is variable and depends on x? Object moves from x = a to x = b, under a force f (x), where f is a continuous function that changes with x. The Work exerted on the object is given by: Work of a non constant force:

  26. When a particle is located a distance x feet from the origin, a force of x2 + 2x pounds acts on it. How much work is done in moving it from x = 1 to x = 3? Solution: ft-lb. The work done is 50/3 ft-lb. Example 2: Work of a non constant force

  27. Hooke’s Law states that the force required to maintain a spring stretched x units beyond its natural length is proportional to x: f (x) = kx where k is a positive constant called the spring constant. Work (Case of a Spring) Hooke’s Law holds provided that x is not too large (a) Natural position of spring (b) Stretched position of spring

  28. Example 3: Work on a spring A force of 40 N is required to hold a spring that has been stretched from its natural length of 10 cm to a length of 15 cm. How much work is done in stretching the spring from 15 cm to 18 cm? Solution:According to Hooke’s Law, the force required to hold the spring stretched x meters beyond its natural length is f(x) = kx.

  29. Example 3 – Solution cont’d When the spring is stretched from 10 cm to 15 cm, the amount stretched is 5 cm = 0.05 m. This means that f(0.05) = 40, so 0.05k = 40 k = = 800 Thus f(x) = 800x and the work done in stretching the spring from 15 cm to 18 cm is = 400[(0.08)2 – 0.05)2] = 1.56 J

  30. 5.5 Average Value of a Function

  31. To compute the average value of a function y = f (x), over an interval [a,b]: We start by dividing the interval [a, b] into n equal subintervals, each with length x = (b – a)/n. Then we choose points x1*, . . . , xn* in successive subintervals and calculate the average of the numbers f (x1*), . . . , f (xn*): (For example, if f represents a temperature function and n = 24, this means that we take temperature readings every hour and then average them.) Average Value of a Function

More Related