1 / 22

Ground Control

Andrew Bourgeois Aaron M inard. Ground Control. Contents. Background Problem Statement Solution Mechanical Design System Diagram Electrical Design Programming Schedule Budget. Background. VTC developing CubeSat , transmits data Have to follow CubeSat to receive data

sofia
Télécharger la présentation

Ground Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Andrew Bourgeois Aaron Minard Ground Control

  2. Contents • Background • Problem Statement • Solution • Mechanical Design • System Diagram • Electrical Design • Programming • Schedule • Budget

  3. Background • VTC developing CubeSat, transmits data • Have to follow CubeSat to receive data • Existing 3-meter parabolic dish antenna • Low orbit satellite revolves around earth in minutes, seen for short time per orbit • Existing solutions • EGIS Bi-axial antenna positioning system

  4. EGIS Rotor and Control • Equipment-GesellschaftfürInternationaleElektronikSysteme • Cost: • Software $400 • Data Interface $1,100 • Hardware $2,700 (EL-40°, AZ-180°) • Extension $2,200 (EL-90°, AZ-360°) • Rotor Hardware Mount $400 • Satellite Dish Mount $400 • Total $7,200

  5. SatPC32 • A free software available online for tracking satellites. Updates on screen and controls rotor to point to position satellite • Uses orbit of satellite and observer position • Many types of rotors to select for output • Uses Serial port or Parallel port on PC

  6. SatPC32 WinListen predicts path Screen Shot of SatPC32 in use

  7. Problem • Track a low orbit satellite such as a CubeSat from horizon to horizon is as little as 30 seconds 180°/30 seconds=6°/sec • Move a 3 meter satellite dish • 360° Azimuth (left/right) • 90° Elevation (up/down) • Interface to PC running SatPC32

  8. Solution • Gears and motors, motor controllers • FreescaleColdfire 32-bit Microcontroller • Serial interface with SatPC32 using EGIS controls and a serial port • Position sent as ASCII Characters • :P AZ=123.45 • :P EL=009.87 • Magnetic Encoders measure position of dish • Use/Modify existing designs for elevation and azimuth control

  9. System Diagram SatPC32 EL - Motor Controller RS232 AZ - Motor Controller Micro- controller Position Encoders Limit Switches

  10. Mechanical Concepts • Azimuth • A left to right angle measurement from a fixed point (north in navigation) • Worm Gears • Speed (Gear Ratio) • Torque • Modify existing designs

  11. Azimuth Design

  12. Elevation Design

  13. Analysis

  14. Position Sensing Specified previously • 1° step size = at least nine bit resolution 29 = 512 steps 360 deg/512 steps = .7 deg/step • 6°/sec = 1 rpm 180°/30sec=6°/sec=360°/60sec • Magnetic shaft encoder • Max 15,000 rpm • Absolute position sensing • Small size, large operating temperature range • Analog output from 10-bit DAC • 1024 steps or .35°/step

  15. Power Distribution A Micro- controller Position Encoders PC Running SatPC32 E 5Vdc regulator 12Vdc 10Amp Limit Switch Motor Controller Circuit Protection FUSE AC 12Vdc 10Amp FUSE Limit Switch Motor Controller

  16. Micro Controller

  17. Programming • Read new position from serial port • Stores values when they come in • Read actual position from encoders • Measure periodically • Decide where to turn, how fast • Always checking limit switches • If ever activated, stop motors New Serial? Read Serial Check Encoders? Read Encoders Controller (Set Outputs)

  18. Check-Serial Code

  19. Schedule

  20. Cost

  21. Thank You • VTC Mechanical Department • Ordering Parts, answer construction questions • Professor John Murphy • Controller software design, test equipment • Professor Samuel Colwell • Programming support • LEDdynamics Inc. of Randolph, VT • Electrical Supplies & Microcontrollers • Erich Eichmann • SatPC32 Support

  22. Questions?

More Related