1 / 13

Operation Guide for the REDMINI2 Theodolite Measurement System

This guide provides step-by-step instructions for the operation of the REDMINI2 theodolite measurement system. It covers essential procedures such as mounting the device, obtaining a correct sighting of the prism, and conducting measurements. Users will learn to power on the REDMINI, confirm its operational status, and start and end measurements efficiently. Additionally, it explains how to interpret display indicators, including battery status and measurement readiness, ensuring accurate and reliable field measurements.

sutton
Télécharger la présentation

Operation Guide for the REDMINI2 Theodolite Measurement System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ASM 215EDM OPERATION

  2. LIETZ REDMINI2

  3. MOUNTING • The REDMINI mounts on the theodolite.

  4. SIGHTING • Obtain an approximate siting using the gun sight • Sight the prism with the siting telescope • Sight the center of the prism accurately

  5. MEASURING • Turn the power on • Confirm that the REDMINI is operational • Press the MEAS. switch to start measurement • Press the MEAS. switch to end measurement • Turn the power off

  6. TURN THE POWER ON • Press the power switch

  7. TURN THE POWER ON • There will be a short audio tone and the display will look like: • This display will last for about 2 seconds.

  8. TURN THE POWER ON • If the battery voltage is adequate the display will change to: • If the batter voltage is too low the display will change to:

  9. CONFIRM THAT REDMINI IS READY • When the center of the reflecting prism is correctly sighted, the asterisk mark lights up on the display indicating that the light intensity is correct for a measurement. • The “F” indicates that the measurement will be made in feet.

  10. START MEASUREMENT • Press the MEAS. switch to start measurement

  11. START MEASUREMENT • A short audio tone is heard when the REDMINI starts the measurement • The triangle in the lower left corner flashes during measurement • When the measurement is completed, a short audio tone sounds and the value is displayed

  12. END MEASUREMENT • The REDMINI will continue to take measurements until the MEAS. switch is pressed again • then the last measurement is displayed

  13. TURN THE POWER OFF • Press the power switch

More Related