1 / 35

Chemgard TM Infrared Gas Monitor

Chemgard TM Infrared Gas Monitor. Chemgard Overview. What is Photoacoustic Infrared and how does it compare with other technologies: Review of traditional IR PIR Theory –What happens when light meets sound? Comparison w/ traditional IR Electrochemical Sensors Flame Ionization Detectors

sveta
Télécharger la présentation

Chemgard TM Infrared Gas Monitor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ChemgardTM Infrared Gas Monitor

  2. Chemgard Overview • What is Photoacoustic Infrared and how does it compare with other technologies: • Review of traditional IR • PIR Theory –What happens when light meets sound? • Comparison w/ traditional IR • Electrochemical Sensors • Flame Ionization Detectors • Gas Chromatography • Solid State Sensors • Chemgard Markets & Applications

  3. Photoacoustic Infrared Gas Detection Technology • To better understand the advantages of Photoacoustic Infrared Technology, we will briefly compare it to the older, more commonly used Absorptive Infrared Technology. • How Does It Differ?

  4. Infrared Detection Methodology • Both absorptive and photoacoustic techniques utilize infrared energy of a selective wavelength. • Majority of gases absorb infrared energy of various wavelengths. • The wavelength selected for use in detection is determined by the gas in use and its specific characteristics.

  5. Infrared Technology • Red is representative of a typical gas absorption characteristic. • Yellow is an infrared wavelength used to detect this specific gas.

  6. Absorptive Technique • All absorptive infrared detection methods differ from manufacturer-to-manufacturer. However, the basic principal remains the same. • Sample and Reference measurements must be taken. • The Sample cell is exposed to the gas to be detected. • The Reference cell is either isolated from the gas to be detected or infrared energy outside the absorptive wavelength characteristics of the gas to be detected is used. • The two measurements are compared. If they are equal, the instrument will indicate zero (0).

  7. Absorptive Technique • When the gas to be detected is present, it absorbs some portion of the Sample infrared energy. • The Reference infrared energy is unaffected by the gas to be detected. • The change in ratio of the Sample and Reference detectors is the actual concentration of gas present.

  8. Photoacoustic Infrared Technology • Has been in use since the 1960’S • MSA –10 Years of experience in PIR gas monitors • Has replaced many traditional infrared analyzers as well as other sensing technologies

  9. Advanced Technology Photoacoustic Infrared sensing technology differs from all other available detection techniques on the market. • It has Two distinct advantages: • The ability to sense a leak as low as in the PPB level for some applications. • The ability to operate long periods of time without adjustment or zero drift, a common problem with all other technologies in use today.

  10. Basic PIR Cell Assembly

  11. Photoacoustic IR Optical Bench • IR source - wire filament emitting multiple wavelengths of light • Chopper (not shown) - used to setup modulation • Optical filters • provide sensitivity and selectivity for a given gas • selected for specific application • Optical block - volume can be changed for specific ranges • Detector-high sensitivity microphone • Solenoid valves - sample inlet and outlet provide seal during photoacoustic gas detection • Heater and thermostat - temperature control critical for low PPM or PPB detection

  12. Photoacoustic Infrared Technology • Sample Gas Enters the Cell…..

  13. Toxic Gas Sensors

  14. Electrochemical Sensors

  15. Flame Ionization Detectors

  16. Gas Chromatographs

  17. Solid State Sensors

  18. Chemical Tape Technology

  19. Technology Comparison

  20. Gas Detection Comparison

  21. Chemgard Applications • Applications include: • CO, CO2, cleaning agents, solvents, heat transfer fluids & many other common industrial chemicals • Photoacoustic Infrared Gas Detection used in: • plastics, paint, automotive, pharmaceutical, semiconductor, rubber & other general chemical industries

  22. Some Chemgard Customers • 3M • Air Products • BASF • Chrysler • Dow Chemical Co • Dupont • GE Plastics • Kimberly Clark • LA Municipal Authority • Miller Brewing • Mitsubishi • Praxair • Toshiba • Walt Disney • Xerox

  23. The Chemgard Advantage

  24. The Chemgard Advantage

  25. The Chemgard Advantage

  26. The Chemgard Advantage

  27. Chemgard Industries

  28. Petrochemical Industries

  29. Plastics & Paint Industry

  30. Agricultural Industry

  31. Rubber Industry

  32. Medical & Pharmaceutical Industry

  33. Semiconductor Industry

  34. Automotive Industry

  35. The Chemgard Advantage • Utilizes Photoacoustic Infrared Gas Detection Technology • Can detect a wide range of industrial compounds • Detection of Percent, PPM or in some cases PPB levels • High Sensitivity and Selectivity to Gas of Interest

More Related