1 / 18

A Compressed Sensing Based UWB Communication System

A Compressed Sensing Based UWB Communication System. Characterization presentation Anat klempner Spring 2012 SupervisED BY: MaliSA marijan Yonina eldar. Content. Background UWB – Ultra Wideband Project Motivation Compressed Sensing Project overview Project Goals Project Tasks

tamal
Télécharger la présentation

A Compressed Sensing Based UWB Communication System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Compressed Sensing Based UWB Communication System Characterization presentation Anatklempner Spring 2012 SupervisED BY: MaliSAmarijan Yoninaeldar

  2. Content • Background • UWB – Ultra Wideband • Project Motivation • Compressed Sensing • Project overview • Project Goals • Project Tasks • Timetable • Current State • Project Schedule

  3. UWB A technology for transmitting information in bands occupying over 500 MHz bandwidth. Used for short-range communication Very low Power Spectral Density

  4. UWB - Advantages • Useful for communication systems that require: • High bandwidth • Low power consumption • Shared spectrum resources

  5. UWB - Applications • In communications: • High speed, multi-user wireless networks. • Wireless Personal Area Networks / Local Area Networks • Indoor communication

  6. UWB - Applications • Radar • Through-wall imaging and motion sensing radar • Underground imaging • Long distance , Low data rate applications • Sensor networks • High precision location systems

  7. Project Motivation • The problem: • The UWB signal has very high bandwidth, and therefore the UWB receiver requires high-speed analog-to-digital converters. • High sampling rates are required for accurate UWB channel estimation.

  8. Project Motivation • The proposed approach relies on the following UWB signal properties: • The received UWB signal is rich in multipath diversity. • The UWB signal received by transmitting an ultra-short pulse through a multipath UWB channel has a sparse representation.

  9. Compressed Sensing • The main idea: • A signal is called M-sparse if it can be written as the sum of M known basis functions:

  10. Compressed Sensing • An M-sparse signal can be reconstructed using a few number of random projections of the signal into a random basis which is incoherent with the basis in which the signal is sparse, thus enabling reduced sampling rate.Where Φ is the random projection matrix (measurement matrix).

  11. Project Goals We wish to build a simulation environment for an UWB communication system with compressed sensing based channel estimation. The simulation environment will be used to compare different compressed sensing strategies.

  12. Simulation Environment Block-Diagram of the system: Channel Estimation Signal Generator Multipath Channel Detection Correlator Based Detector/ Rake Receiver To be implemented according to IEEE 802.15.4a standard

  13. Project Tasks • Phase 1 - Simulate the system and perform the channel estimation. Performance parameter: MSE of the estimation error as a function of the number of measurements. • Phase 2 - Simulate signal detection methods: correlator-based detector and the RAKE receiver .Performance parameter: BER vs. input SNR for different sampling rates and number of pilot symbols.

  14. Project Tasks • Phase 3- Compare the MSE and BER performance for the different sampling schemes: the randomized Hadamard scheme, Xampling method, and the random filter. • Phase 4 -Compare the MSE and BER performance for the different sampling schemes and the reconstruction algorithms (e.g. , OMP, eOMP, and CoSaMP).

  15. What has been done Studying the theoretical background and some of the different algorithms to be implemented. Beginning of implementation of the simulation environment for the channel estimation phase.

  16. Currently: Phase I – Channel Estimation Block-Diagram of the process: Signal Generator Multipath Channel Analog pre-processing A/D Conversion Reconstruction Algorithm Randomized Hadamard Scheme/ Random Filter Variants of the MP algorithm To be implemented according to IEEE 802.15.4a standard

  17. Schedule Phase I – 2-3 weeks Phase II – 2-3 weeks Phase III + IV – 2-3 weeks

  18. Thank You!

More Related