1 / 44

Environmental house project Jack Bradley

Environmental house project Jack Bradley. What will be covered in this lecture?. Why people need a house How technology provides a house Design skills. How many types of house can you name?. Traditional Houses. Yurt (2) Igloo (3) Grass House (4) Pueblo.

tanner-mclean
Télécharger la présentation

Environmental house project Jack Bradley

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Environmental house project Jack Bradley

  2. What will be covered in this lecture? • Why people need a house • How technology provides a house • Design skills

  3. How many types of house can you name?

  4. Traditional Houses • Yurt (2) Igloo • (3) Grass House (4) Pueblo

  5. Traditional Houses • (5) Tepee (6) Trullo • (7) Forest Pavillion (8) Mandan lodge

  6. Traditional Houses • (9) Bedouin tent (10) English Cottage

  7. Jack and Joanne have moved again!

  8. Reasons for diversity Materials Socio – cultural factors Climate Reasons For Diversity Ways of Life Economics Technology

  9. Why people need a house? • Physical comfort • Domestic activities • Socio – cultural factors

  10. What does technology provide? • Materials • Services • Construction

  11. Wood – Its properties • Resists tensile and compressive forces • Easy to work with simple tools • Light and easy to manipulate • Good thermal insulator • Spans distances • Feels warm

  12. Influence of Services • Gas • Heating • Drainage • Electricity • Hot water • Cold water

  13. Design Skills Required • Analysis • Synthesis • Evaluation

  14. Keeping Warm • Location • Orientation • Shape

  15. Orientation • Wind/weather • Sun – overheating V natural heat • Topography – drainage, stream use, shelter • Natural shading – trees – summer/winter (deciduous)

  16. Green/Sustainable Building Definitions: To be classed as a green building it is “…essential for the environmental impact of all its constituent parts and design decisions to be evaluated.” “ A healthy built environment based on resource efficient and ecological principles.”

  17. Design Principles • Reduce energy in use • Minimising external pollution and external damage • Design in harmonious relationship with surrounds • Avoid destruction of natural habitats • Re-use rainwater • Treat and recycle waste water • Minimise extraction of materials • Minimise waste materials provided (typically 10%)

  18. Green design • Solar Collector • Rainwater Cistern • Conservatory • Earth heat storage bed • Power generation (wind, water etc) • Waste recycling system • Insulation • Renewable materials

  19. Example Sketch a graph of temperature against time for a house where the heating pattern is as follows. The heating is turned on at 6am and off at 11am. It is turned on again at pm and off again at 11pm. When the heating is on, the occupants require the temperature to be 23C. On your graph, indicate the approximate values of the average inside temperature.

  20. Heating a house Heat Flow Rate = U-Value * Area temperature difference Ventilation loss = Specific heat capacity * Mass flow rate of air * Temperature difference Mass flow rate of air = Air change rate * House Volume * density of air 3600

  21. Equation Ventilation Loss = 0.33 x House Volume x Air change rate x Temperature difference. Average temperature and degree-days Total heat required = Specific loss * degree days * 86400

  22. Example 2 Calculate the rate of heat loss from the house shown below when the temperature difference between the inside and the outside is 20C. The house has an air change rate of 1.0ach, walls with U-values of 0.6Wm-² C-1 and U-values of 0.3Wm-² C-1 for the roof, 0.8 for the floor, 3.4 for doors and 5.6 for the windows. The total area of window is 12m² and there is 4m² of external doors 5.5m 6m 6m

  23. Solution 2 Total wall area = 4 x 5.5m x 6m =132m² Net wall area = total wall area – window area – door area =132m² - 12m² - 4m² =116m² Floor area = 6m x 6m = 36m² Roof area = 6m x 6m = 36m² House volume = 5.5m x 6m x 6m = 198m² Fabric loss = U-Value x area x temp. difference For walls: fabric loss = 0.6 x 116 x 20W = 1392W For the floor: fabric loss = 0.8 x 36 x 20W = 576W For the roof: fabric loss = 0.3 x 36 x 20W = 216W For the windows: fabric loss = 5.6 x 12 x 20W = 1344W For the doors: fabric loss = 3.4 x 4 x 20W = 272W

  24. Total fabric loss = 1392W + 576W + 216W + 1344W + 272W = 3800W Ventilation loss = 0.33 x house volume x air change rate x temp. difference = 0.33 x 198 x 1 x 20W = 1306.8W Total rate of heat loss = fabric loss + ventilation loss = 3800W + 1306W = 5106.8W Specific loss = total rate of heat loss temperature difference 5106.8 = 255.34 W 20 C

  25. Internal and Solar gains In a typical house, the total gains from all sources will be about 1000W. Te specific loss will approximate to 255W C^-1 Temperature rise from internal & solar gains = Total gains / Specific loss

  26. Building activity relationship charts

More Related