teamijtsrd7123

Solar Thermal Energy STE is a form of energy and a technology for harnessing solar energy to generate thermal energy or electrical energy for industries and to desalinate water and to treat waste water, among other things. Here we demonstrate a floating solar receiver which is capable of generating 1000C steam under ambient air conditions without optical concentration. Here the high temperatures are achieved by using thermal concentration and heat localization. This reduces the convective, conductive and radiative heat losses. This demonstration of a low cost and scalable solar vapour generator holds the promise of significantly for expanding the application domain and reducing the cost of solar thermal systems. G. Krishna Rohith | G. Durga | S. Dhayanandh ""Bubble Wrap: The Key to a New Floating Solar Thermal System"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30017.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30017/bubble-wrap-the-key-to-a-new-floating-solar-thermal-system/g-krishna-rohith

Brain Computer Interface BCI aims at providing an alternate means of communication and control to people with severe cognitive or sensory motor disabilities. Brain Computer Interface in electroencephalogram EEG is of great important but it is challenging to manage the non stationary EEG. EEG signals are more vulnerable to contamination due to noise and artifacts. In our proposed work, we used Cuckoo Search Masking Empirical Mode decomposition to ignore such vulnerable things. Initially, the features of EEG signals are taken such as Energy, AR Coefficients, Morphological features and Fuzzy Approximate Entropy. Then, for Feature extraction method, Masking Empirical Mode Decomposition MEMD is applied to deal with motor imagery MI recognition tasks. The EEG signal is decomposed by MEMD and hybrid features are then extracted from the first two intrinsic mode functions IMFs . After the extracted features, Cuckoo Search algorithm is used to select the significant features. Different weights for the relevance and redundancy in the fitness function of the proposed algorithm are used to further improve their performance in terms of the number of features and the classification accuracy and finally they are fed into Linear Discriminant Analysis for classification. This analysis produces models whose accuracy is as good as more complex method. The results show that our proposed method can achieve the highest accuracy, maximal MI, recall as well as precision for Motor Imagery Recognition tasks. Our proposed method is comparable or superior than existing method. Jaipriya D ""Motor Imagery Recognition of EEG Signal using Cuckoo-Search Masking Empirical Mode Decomposition"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30020.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30020/motor-imagery-recognition-of-eeg-signal-using-cuckoo-search-masking-empirical-mode-decomposition/jaipriya-d

Data analytics is a qualitative and quantitative features and process used to enhance the productivity and business gain. Data is extracted and categories identity analyzes behavior data and patterns according to organization requirement. Analytics is an interpretation and communication of meaningful patterns or summary in data. Data integration is a precursor to data analysis, and data analysis is closed linked to data visualization and data. K. Balaji Kumar | S. Balamanoj | Ashik K. H ""Data Analytics Features and Concepts"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30062.pdf Paper Url : https://www.ijtsrd.com/computer-science/data-processing/30062/data-analytics-features-and-concepts/k-balaji-kumar

"Culture is the most important for the construction of any society. Social interactions are within the culture is a characteristics feature of any society. cultural and traditional behaviour of the society. Culture gives the social identity for a group of people on which a person can make his individual identity. It is made by the people and it taught for the people. Everybody feel proud of their own culture and traditions. Culture is a base of Society which is combination of customs, rituals, and idea for behaviour, belief, values, attitude and the meaning of behaviour. Culture differs from one another society and community. The present paper attempt to search the different culture and tradition presented in Anita Nair's book 'Ladies Coupe'. This culture which is for the people who construct their identity with him forced to women, lost their identity, freedom and desire. Ladies Coupe is the fine example of the cultural and traditional things which became a mental trauma for the may of characters. Akhila, Marikonathu, Prabha Devi, Janki and Seela are some of characters with which Anita Nair elaborate te victimazation of subordinate and marginal people. Anuradha Ghodke | Dr Vinay D Bhogle ""Feminine Psyche: Female Perspective in Anita Nair's 'Mistress'"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30039.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/english/30039/feminine-psyche-female-perspective-in-anita-nairu2019s-u2018mistressu2019/anuradha-ghodke"

"Culture is the most important for the construction of any society. Social interactions are within the culture is a characteristics feature of any society. Culture gives the social identity for a group of people on which a person can make his individual identity. It is made by the people and it taught for the people. Everybody feel proud of their own culture and traditions. Culture is a base of Society which is combination of customs, rituals, and idea for behaviour, belief, values, attitude and the meaning of behaviour. Culture differs from one another society and community. The present paper attempt to search the different culture and tradition presented in Anita Nair's book 'Ladies Coupe'. This culture which is for the people who construct their identity with him forced to women, lost their identity, freedom and desire. Ladies Coupe is the fine example of the cultural and traditional things which became a mental trauma for the may of characters. Akhila, Marikonathu, Prabha Devi, Janki and Seela are some of characters with which Anita Nair elaborate te victimazation of subordinate and marginal people. Anuradha Ghodke | Dr Vinay D Bhogle ""Culture and Tradition in Anita Nair's 'Ladies Coupe'"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29957.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/english/29957/culture-and-tradition-in-anita-nairu2019s-u2018ladies-coupeu2019/anuradha-ghodke"

Labor is a phenomenon that exists in many creatures and unlike other acute and chronic pain, the pain of labor does not correlate with any disease or pathology. The complications of pain are tension and anxiety, prolonged labor, abnormal fetal heart rate, increase the incidence of cesarean delivery and neonate's low Apgar score. Acupressure is a non invasive method, which is used to augment labor, provide pain relief, and shorten delivery time. Aim the aim of this literature reviews are evaluate the effectiveness of acupressure on labor pain's intensity and duration of labor. Methods A comprehensive search of databases and Internet research engines holding information related to effect of acupressure on duration of labor and intensity of labor pain, Pub Med, Saudi digital library and Google scholar search engine from 2010 to 2016.Results Eight articles were included in this review. Conclusion The acupressure was more effective in initial phase of labor, the effect of the intervention were more visible immediately after the intervention. In addition, the acupressure helps in reducing the perception of pain during the first stage of labour without any side effect on the mother or the foetus. Dr. Hamdia Mohammed Abd ELaziz | Prof. Lamiaa Ahmed Elsayed | Prof. Pushpamala Ramaya ""Effect of Acupressure on Duration of Labor and Intensity of Labor Pain"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30038.pdf Paper Url : https://www.ijtsrd.com/medicine/nursing/30038/effect-of-acupressure-on-duration-of-labor-and-intensity-of-labor-pain/dr-hamdia-mohammed-abd-elaziz

The relationship between corporate social responsibility CSR and earnings management EM is an extensive empirical study. However, the evidence on the nature of the relationship is unclear. A commonly defined reason for divergent and contradictory results is measurement issues. The purpose of this article is to evaluate alternative operation and measurement methods applied to the CSR and EM concepts in the empirical literature on CSR EM relationships. Our systematized appraisal was conducted over the last nine years from 2008 to 2016. This study has come to different observations. First, CSR measurement methods include sustainability indexes, content analyzes and single dimensional measurements, while EM measurement methods include discretionary accruals, discretionary loan loss provisions, real earnings management, abnormal earnings management, earnings persistence and earnings smoothing. In addition to the unique drawbacks of the approach, the subjectivity of the researcher and the selection anomalies that may influence the nature of the CSR EM relationships identified in the empirical literature. Finally, possible ways of overcoming these disadvantages are recommended. Mashiur Rahman | Sarah Chowdhury ""Relationship between Corporate Social Responsibility and Earnings Management: A Systematic Review of Measurement Methods"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29987.pdf Paper Url : https://www.ijtsrd.com/management/business-ethics-and-legal-issues/29987/relationship-between-corporate-social-responsibility-and-earnings-management-a-systematic-review-of-measurement-methods/mashiur-rahman

In order to compete in the ever growing competent market it is very important for a structural Engineer to save time as well as money, as a sequel to this is an attempt made to analyze and design a INTZE water tank by using IS method and software package of staad.pro. For analyzing a INTZE water tank one has to consider all the possible loadings and see that the structure is safe against all possible loading conditions. STAAD Pro V8i is a comprehensive and integrated finite element Analysis and design offering, including a state of the art user interface, visualization tools, and international design codes. There are several methods for analysis of different frames like finite element method. The present project deals with the design and analysis of a INTZE water tank with 12 lakh liters capacity for Jharkhand. The dead load, live loads and seismic load are applied and the design for different structural component, columns is done by using IS code method and STAAD.Pro with its new features surpassed its predecessors, and competitors with its data sharing capabilities with other major software like AutoCAD, and MS Excel. Intzetank is a type of elevated water tank supported on stagingThere are several methods for analysis of different frames like finite element method.Analysis of results of structural design and estimation of quantities of Intze tank for different wind speed and different bearing capacity of soil, For same bearing capacity of soil, if wind speed is increased the quantity of concrete and steel in Intze type elevated water tank are also increased. For same bearing capacity of soil, if wind speed is increased the quantity of concrete and steel in Intze type elevated water tank are also increased. Keeping the values of bearing capacity of soil constant, for every incremental increase of 10 m sec of wind speed, the quantites of concrete is increased.If the design of intze type elevated water tank is devided into two parts namely super structure above columns and super structure upto columns the analysis of results of this study reveals that with the change in the wind speed and or the bearing capacity of soil, there is an appreciable change is required quantities of concrete and steel for sub structure while these is almost no change in the required quantities of concrete and steel for super structure. Pammy Barnawal | Nitesh Kushwaha ""Modeling Analysis & Design of Intz Water Tank Considering Different Wind Speed using STAAD PRO V8I Software"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30035.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30035/modeling-analysis-and-design-of-intz-water-tank-considering-different-wind-speed-using-staad-pro-v8i-software/pammy-barnawal

Internal combustion engine occupies a significant spot in present day. with the most recent plan alteration in different part being advanced to improve the efficiency and generally speaking performance, one segment has been kept untouched that is camshaft. Cam control the breathing channels of the engine that is the planning of valves through which fuel air mixture enters and fumes is driven out. with help of push rods , rocker arms, stiff springs. With increasing performance demands engine specialists and researchers over the world are perusing radical cam less structure which promises to give ICEs a greater improvement in effectiveness. The fantasy about accomplishing cam less technology is shutting reality at rapid rate. With cam less technology put into practice, the engine power can be improved, pollutant emissions could be controlled and better mileage is acquired, in addition to that the whole mechanism of pulley or belt drive is replaced by the camless engine with greater efficiency than earlier i.e intake and exhaust of the IC engine by camless actuation technology with the camless engine variable valve timing also controls the intake and exhaust gas recirculation. Its one of the major advantage is it offers continously variable and independent control of all types of motion. Priyanshu Kumar Tiwari | Pushkar Verma | Prince Tiwari | Vijay Kumar Gupta ""Review Paper on New Automotive 'Camless Engine'"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29892.pdf Paper Url : https://www.ijtsrd.com/engineering/automotive-engineering/29892/review-paper-on-new-automotive-camless-engine/priyanshu-kumar-tiwari

"The development of information and communication technology has made a shift in consumer shopping behavior from offline stores to online sales in Indonesia, one of which is marked by the growth of online sales that are experiencing a significant increase. one of the factors that influence consumers in buying a product is a marketing system and price perception. If online marketing continues and the price offered is lower than its competitors, consumers will buy more products at the store. Therefore, in this study the authors use online marketing and price perception as independent variables and purchasing decisions as the dependent variable. In this study the method used is a quantitative method with an associative approach. In this research, the population is the consumers of Toko Aidilia Os Medan. The method of sampling in this study used probability sampling techniques with a simple random sampling approach of 60 respondents. Data collection is done by distributing questionnaires to respondents. In this study using data analysis techniques, namely validity test, reliability test, classic assumption test, multiple linear regression analysis, t test, F test, and the coefficient of determination test R2 , which is operated through the SPSS 16 program. The results of the t test study of online marketing variables t value 4.281 t table 2.001 means that online marketing has an influence on purchasing decisions and the perception of price variable t value 5.246 t table 2.001 means that price perception has an effect on purchasing decisions. F test of online marketing variables and price perception F value calculated 29.342 F table 3.23 shows that online marketing and price perception together influence the purchase decision. The coefficient of determination R2 of 0.507 indicates that online marketing variables and price perception affect purchasing decisions by 50.7 and the remaining 49.3 is influenced by other factors not included in this study. The conclusion of the research results shows that online marketing has a significant effect on purchasing decisions and price perceptions have a significant effect on purchasing decisions, Simultaneously online marketing and price perceptions have a significant effect on purchasing decisions. Aidilia Adhami Siregar | Togu Harlen Lbn. Raja | Lasman Eddy Bachtiar ""The Effect of Online Marketing and Price Perception of Purchase Decisions (Case Study at Medan Aidilia Os Shop)"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29930.pdf Paper Url : https://www.ijtsrd.com/management/marketing/29930/the-effect-of-online-marketing-and-price-perception-of-purchase-decisions-case-study-at-medan-aidilia-os-shop/aidilia-adhami-siregar"

Price is very important in doing business because the price is one of the factors considered by the customer in making a purchase so that businesses must really consider the progress of their business well. If the business actor is wrong in setting the price, it will result in losses to the business so that the business actor will find it difficult to survive with the increasingly high competition in the business world. Besides the price, it is also necessary to carry out quality control or the quality of goods and services offered to customers, especially service goods felt by the buyer. In the development of business activities everywhere, each business actor has their own strategy in order to win the hearts of customers so that these business activities can run for a long time. One business actor in the service sector is the Lady Boss Salon which offers beauty care products to its customers who have graduated at Medan Mega Trade Center Complex MMTC Jalan Pancing Medan. The method used in this research is quantitative with an associative approach. The technique used in this study is probability sampling with a simple random sampling approach of 55 respondents. Data collection was carried out by distributing questionnaires to respondents who are consumers of Lady Boss Salon. The data analysis technique uses validity test, reliability test, classic assumption test, multiple linear regression analysis, t test, F test which is operated through SPSS 16 program. The results of the study explained that the Price Variable X1 affected the Purchasing Decision Y by 10.7 and the Service Quality Variable X2 affected the Purchasing Decision Variable Y by 41.6 and the Price Variable X1 and the Quality Variable Services X2 affect the Purchasing Decision of 55.73 Adiwima Zebua | HD. Melva Sitanggang | Amril ""Influence of Price and Quality of Service to Purchase Decisions in Salon Lady Boss Medan Mega Trade Center (MMTC) Medan Complex"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29927.pdf Paper Url : https://www.ijtsrd.com/management/marketing/29927/influence-of-price-and-quality-of-service-to-purchase-decisions-in-salon-lady-boss-medan-mega-trade-center-mmtc-medan-complex/adiwima-zebua

"The retail business or retail trade for furniture products is very dependent on the supply of products offered to consumers in accordance with the consumers choice and purchasing power. Changes in furniture buying behavior is one of the important factors that is a concern for retailers to build their competitive advantage with continuous innovation starting from products, service processes, marketing and management. Competition among furniture retailers, especially traditional retailers is increasingly pushed by the presence of modern retail with the ability to create high buying value to consumers in terms of price, product variants, design and quality. The presence of e commerce that sells furniture products through online, has begun to grow significantly. This paper will discuss more specifically about Furniture Retail Businesses in Indonesia and identify problems faced and various alternative solutions from both theoretical and practical perspectives. Lusy Evylia Puspita | Lena Ellitan ""Problem Identification and Alternative Solution of Retail Furniture in Indonesia"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29998.pdf Paper Url : https://www.ijtsrd.com/management/retail-management-and-comm/29998/problem-identification-and-alternative-solution-of-retail-furniture-in-indonesia/lusy-evylia-puspita"

The Mutiny of 1857 proved to be a land mark in the history of India. This Mutiny ended the company's rule. However, after the war the rule of the British Crown began. Not only common people took part in the Mutiny but also the princes, the Nawabs, the Rajas, the rulers, the Zamindars and even the Sepoys took interest in the Mutiny. During the Mutiny, the last Mughal Emperor Bahadur Shah Zafar 1837 1862 was proclaimed as the Emperor of India. The Mutiny began on 10th May 1857 and then spread like wildfire to different parts of the country. The people and the Sepoys rose to the rebellion against the unlawful activities of the British Govt. By this Article a better understanding about the insurgency of 1857 has been made to know the actual cause behind the Mutiny and to know why the Indians felt dissatisfied with the British Govt. This Article helps us to reconstruct the History of the Mutiny of 1857, to know the nature and background of the Mutiny, the beginning of the Mutiny, the causes of the Mutiny, the spread or the main events of the Mutiny, the failure of the Mutiny and the result or the outcome of the Mutiny of 1857. Adil Firdous Wani ""The Insurgency of 1857 in British India_The First war of Independence"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30011.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/history/30011/the-insurgency-of-1857-in-british-india_the-first-war-of-independence/adil-firdous-wani

"This study aimed at investigating the impact of teachers' quality on graduates' employability the case of public universities in the North West and South West regions of Cameroon. The purpose of the study was to examine the extent to which lecturers' teachers' quality affect the quality of training of graduates. The survey research design was adopted for the study. Data was successfully collected from 361 graduates, 385 final year undergraduate students preparing for graduation in 2019 and 56 academic staff. Questionnaire was the instruments used for the study. Instruments consisted of both closed and opened ended items. The reliability statistics for graduates and students from the University of Buea was 0.876 and 0.827 respectively while that for graduates and students from the University of Bamenda was 0.871 and 0.894 respectively. Data from closed ended questions was analysed using SPSS 23.0, with the aid of descriptive and inferential statistical tools while the opened ended questions were analysed thematically. Findings showed that lecturers' teachers' quality R = 412 , P = 0.000 strongly and significantly affect the quality of training and employability chances of graduates with all P values 0.001, far 0.05. Aside this relationship, a significant proportion of graduates, students and academic staff indicated that not all teachers employed in the University and in their department are qualify to teach. Therefore, it was recommended that adequate measures should be adopted to improve on teachers' quality by creating a teacher education center. Nyenty Stephen Atem | Joseph Besong Joseph ""Teachers' Quality and Graduates Employability: The Case of Public Universities in the North West and South West Regions of Cameroon"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30009.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30009/teachersu2019-quality-and-graduates-employability-the-case-of-public-universities-in-the-north-west-and-south-west-regions-of-cameroon/nyenty-stephen-atem"

"In this paper, the author considered a problem ""Formulation of solutions of a class of standard congruence of higher degree modulo a power of an odd prime integer"". It is studied rigorously and the solutions of the congruence are formulated. Illustrating suitable examples, the formula established is tested and verified true. No earlier formulation is found in the literature of mathematics for such congruence. Author has tried his best to find a formula for the solutions of the problem under consideration and succeed. It is the merit of the paper. Prof B M Roy ""RP-47: Formulation of a Class of Standard Congruence of Higher Degree Modulo a Power of an Odd Prime Integer"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29994.pdf Paper Url : https://www.ijtsrd.com/mathemetics/other/29994/rp-47-formulation-of-a-class-of-standard-congruence-of-higher-degree-modulo-a-power-of-an-odd-prime-integer/prof-b-m-roy"

"This paper presents the experimental study for comparison of surface roughness of work piece when grinding three types of 3X13, SKD11 and SUJ2 steels with CBN grinding wheel. The comparison methods in this study include comparison by means, comparison by numerical charts, comparison by histogram plot, and comparison by criteria's of probability theory. The results show that comparison by criteria's of probability theory leads to more reliability than other methods. On this basis, the values of surface roughness of 3X13 and SUJ2 steels are determined to be equal. Meanwhile, the surface roughness of SKD11 steel is much lower than that of the other two steel types. Nguyen Hong Son ""Comparative Experiment of Surface Roughness when Grinding 3X13, SKD11 and SUJ2 Steels with CBN Grinding Wheel"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29986.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29986/comparative-experiment-of-surface-roughness-when-grinding-3x13-skd11-and-suj2-steels-with-cbn-grinding-wheel/nguyen-hong-son"

"No construction work is possible without bricks because of bricks are used in buildings as well as in pavement. Since many centuries brick making has been practiced by human beings, presently bricks are easily made by the use of the machine but in old day's bricks are manufactured by own hand using wooden or steel moulds. For any types of buildings, amajor part of the construction cost is just belongs to bricks work. Bricks walls are not a load bearing elements but they column. Due to high dead weight, the size of the load bearing element needs to be increased which increase the cost of project disasterly that's why in modern engineeringlightweight and low cost building material is needed. In this research work, hypo sludge waste of paper industry and rice husk ash waste from agriculture industry were use. Both the materials are waste product one from paper industries and other from agriculture industry and both cause environmental pollution and disposal problem. Use of such product help to reduce the environmental pollution and they are low cost materials which also helps to keep project cost low. In this research work, hypo sludge is used as cementing material and rice husk ash is used as fine aggregate. In this research work, different variations of hypo sludge and rice husk ash RHA is used for manufacturing bricks sample after that bricks physical properties is compare by ordinary clay bricks, fly ash bricks, and with their different composition. For this research work Dimension Analysis, Initial Rate of Absorption, Compressive Strength Test, Water Absorption Test, Soundness Test, and Efflorescence Test is conducted for the analysis of the physical properties of the bricks. from the analysis by etabs conclusion can be made that bending moments and shear forces are less in structure made up of hypo sludge bricks as compare to conventional structures structure those are made up of either clay bricks or fly ash bricks on every storey of building structure. The weight of a RHA HS Brick is approximately 2.5 to 2.7 kg while clay brick weights approximately 3.0 kg, it causes approximately 13.33 reduction in dead load of structure due to partition walls which on the other hand causes reduction in percentage of steel used in all related load carrying structure section like Beams, Columns, and Footing. Afzal Khan | Nitesh Kushwah ""Study of Bricks Made Up of Different Materials in Building Construction by eTabs Software"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29984.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/29984/study-of-bricks-made-up-of-different-materials-in-building-construction-by-etabs-software/afzal-khan"

"This work includes the effect of different working fluid on the performance of heat exchanger. For analysing the effect of different working fluid, it considered air, water and different nanofluids and measure the Nusselt number and friction factor for each case. It also analysed the effect of change in Reynolds number on the performance of heat exchanger for different working fluids. For analysing the effect of change in Reynolds number, it considered four different Reynolds numbers that is 10000, 12000, 14000 and 16000. For performing the numerical analysis ANSYS fluent was used. Through numerical analysis it is found that for air as a working fluid heat transfer is less, whereas in case of water it is marginally higher than the air. But for all nano fluids, heat transfer is much higher than the air and water. For analysing the effect of different nano fluid, this work includes three nano fluids that are Al2O3, TiO2and ZrO2. Through analysis it is concluded that heat transfer is more in case of TiO2 as compared to other nanofluids, air and water. With increase in Re number heat transfer gets increase whereas as friction factor get decrease. Om Prakash | Pankaj Kumar ""CFD Analysis for Heat Transfer Enhancement Using Nano-Fluids in Double Pipe Heat Exchanger"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29974.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29974/cfd-analysis-for-heat-transfer-enhancement-using-nano-fluids-in-double-pipe-heat-exchanger/om-prakash"

"This research article aimed to assess the implementation of Disaster Risk Reduction Education activities and its effects to the lives of the learners in the Philippines during the School Year 2019 2020. The findings revealed that the respondent's awareness and knowledge of the practices on what to do before during after disasters like fire, flood, typhoon and earthquake were very much knowledgeable. It also publicized that the level of awareness among respondents on the DRR activities such as lecture and video presentation, picture and story show, drawing and coloring, DRR jingle and Evacuation Drills were very much enhanced. It was concluded that through DRR Education in the Philippines, the learners may be able to easily build their knowledge on various natural disasters and through the use and proper application of DRR activities, their interest and desire will increase in order to take appropriate action for disaster preparedness and mitigation, thus, reducing its risks and impacts. Alvin S. Loremia | Deciery Mae L. Alcover ""Implementation of Disaster Risk Reduction Education in the Philippines"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29978.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/enviormental-science/29978/implementation-of-disaster-risk-reduction-education-in-the-philippines/alvin-s-loremia"

This study was conducted to analyze the chemical constituent and to evaluate the antimicrobial properties of the leaf essential oil of Aframomum latifolium. The leaves of this plant was subjected for hydro distillation using all glass Clevenger apparatus. The volatile oil obtained was analysed by means of gas chromatography mass spectrometry GC Ms . The oil yield was 0.08 v w. Seventeen components were identified in the leaf essential oil accounting for 99.90 of the total oil fraction. The leaf oil was dominated by oxygenated monoterpenes 51.26 and monoterpenes 36.22 . Cajeputol, an oxygenated monoterpene is the component with the highest percentage composition 45.05 , cyclofenchene 7.82 . Peperitone is the component with the lowest percentage 0.43 . The oil displayed high antimicrobial Potentials to Staphylococos aureus, Escherichia Coli, Bacillus subtilis, Pseudomonas aeruginosa, Candida albican and aspergillus niger at 100 , 50 and 25 and a moderate inhibition at 12.5 and 6.25 The result obtained from this study justifies the use of the leaf of this plant in ethnomedical practices. Ogunmola Oluranti Olagoke | Amusat Mumini A. "GC/MS Analysis and Evaluation of Antimicrobial Performance of Aframomum Latifolium Leaf Essential Oil from South West Nigeria" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29481.pdf Paper URL: https://www.ijtsrd.com/chemistry/biochemistry/29481/gcms-analysis-and-evaluation-of-antimicrobial-performance-of-aframomum-latifolium-leaf-essential-oil-from-south-west-nigeria/ogunmola-oluranti-olagoke

3D printing is the type of Additive manufacturing, has the potential to vastly accelerate innovation, compress supply chains, minimize materials and energy usage, and reduce waste. Originally developed at the Massachusetts Institute of Technology in 1993. 3D printing technology forms the basis of Z Corporation's prototyping process. 3DP technology creates 3D physical prototypes by solidifying layers of deposited powder using a liquid binder. By definition 3DP is an extremely versatile and rapid process accommodating geometry of varying complexity in hundreds of different applications, and supporting many types of materials. Z Corp. pioneered the commercial use of 3DP technology, developing 3D printers that leading manufacturers use to produce early concept models and product prototypes. Utilizing 3DP technology, Z Corp. has developed 3D printers that operate at unprecedented speeds, extremely low costs, and within a broad range of applications. Alloy wheels are automobile wheels which are made from an alloy of carbon epoxy, E glass epoxy and S glass epoxy is tested individually or sometimes a mixture of both among them best one is chosen. Alloy wheels differ from normal steel wheels because of their lighter weight, which improves the steering and the speed of the car. Alloy wheels will reduce the unstrung weight of a vehicle compared to one fitted with standard steel wheels. Alloy is an excellent conductor of heat, improving heat dissipation from the bakes, reducing the risk of brake failure under demanding driving conditions. In this project, parametric model is done in Catia V5R20 and 3D printing is done in Idea maker software. B. Shushma | N. Aditya | B. Pravalika Reddy | D. Sindhuja | G. Sai Maruthi Sridhar "Designing and Manufacturing of Alloy Wheel using 3d Printing Technology" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29462.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29462/designing-and-manufacturing-of-alloy-wheel-using-3d-printing-technology/b-shushma

Additive manufacturing, often referred to as 3D printing, has the potential to vastly accelerate innovation, compress supply chains, minimize materials and energy usage, and reduce waste. Originally developed at the Massachusetts Institute of Technology in 1993, 3D printing technology forms the basis of Z Corporation's prototyping process. 3DP technology creates 3D physical prototypes by solidifying layers of deposited powder using a liquid binder. By definition 3DP is an extremely versatile and rapid process accommodating geometry of varying complexity in hundreds of different applications, and supporting many types of materials. Z Corp. pioneered the commercial use of 3DP technology, developing 3D printers that leading manufacturers use to produce early concept models and product prototypes. Utilizing 3DP technology, Z Corp. has developed 3D printers that operate at unprecedented speeds, extremely low costs, and within a broad range of applications. This paper describes the core technology and its related applications. Additive manufacturing, often referred to as 3D printing, is a new way of making products and components from a digital model. Like an office printer that puts 2D digital files on a piece of paper, a 3D printer creates components by depositing thin layers of material one after another, only where required, using a digital blueprint until the exact component has been created. Interest in additive techniques is growing swiftly as applications have progressed from rapid prototyping to the production of end use products. Additive equipment can now use metals, polymers, composites, or other powders to print'u009d a range of functional components, layer by layer, including complex structures that cannot be manufactured by other means. By eliminating production steps and using substantially less material, -additive' processes could be able to reduce waste and save more than 50 of energy compared to today's -subtractive' manufacturing processes, and reduce material costs by up to 90 . The use of additive manufacturing can potentially benefit a wide range of industries including defence, aerospace, automotive, biomedical, consumer products, and metals manufacturing. In this project, parametric model is done in Catia V5R20 and 3D printing is done in Cura software. B. Raghu | G. Sai Hitheswar Reddy | D. Rishikesh | K. Aseem Kumar "Design and Manufacturing of Sprocket using Additive Manufacturing Technology" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29464.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29464/design-and-manufacturing-of-sprocket-using-additive-manufacturing-technology/b-raghu

Concrete is largely used due to the abundance of raw material, low manufacturing and maintenance cost, excellence in compression, corrosion aspects, and versatility in forming various shapes and its unlimited structural applications in combination with steel reinforcement. All these factors have contributed pressures to reduce cement consumption and to intensify research in exploring the possibilities of enhancing strength, durability and corrosion reduction through the use of pozzolonas as supplementary cementing materials. Fibre reinforced concrete FRC is a fibre reinforcing cementitious concrete composite, and by adding discrete short fibres randomly in concrete it exhibits many substantially improved engineering properties It is manufactured from kaolin which makes the concrete more durable and ecofriendly. In the present investigation mechanical properties of concrete containing both Fly ash and Metakaolin at various combinations are studied. For the various combinations of Fly ash and Metakaolin, cubes cylindrical and prism specimens are casted with 1 of fibres and the compression strength, split tensile strength and flexural strength test results are obtained and compared with the conventional mix having 1 fibres. It is thereby suggested that utilization of these cementitious materials in concrete will reduce the requirement for cement thereby marching towards green construction. M. Sankaran | Dr. M. Gunasekaran "Experimental Behaviour of Steel Fibre Reinforced Concrete with Partial Replacement of Fly Ash & Metakolin" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29475.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29475/experimental-behaviour-of-steel-fibre-reinforced-concrete-with-partial-replacement-of-fly-ash-and-metakolin/m-sankaran

Food waste is a major, highly visible global problem. It has recently attracted much attention in the world and has become a priority in the global political agenda. Food waste occurs at different stages of a food value chain, including agriculture, post harvest, processing, distribution, retail, and consumption. Regardless of the causes, we can all pitch in to combat the global challenge and turn waste into worth. This paper provides an introduction on global food waste. Matthew N. O. Sadiku | Tolulope J. Ashaolu | Sarhan M. Musa "Global Food Waste: A Primer" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29485.pdf Paper URL: https://www.ijtsrd.com/home-science/food-science/29485/global-food-waste-a-primer/matthew-n-o-sadiku