1 / 7

CSE 144 Project Part 3

Implement a routing tool for standard cell design that starts with placement results and specifies positions of wires connecting pins. The tool includes regular-net routing and feed-through routing and considers fabrication models. It solves problems using channel routing algorithms and handles exception cases. The output specification format includes net positions and track numbers.

tglover
Télécharger la présentation

CSE 144 Project Part 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CSE 144 ProjectPart 3

  2. Overview Goal: Implement a routing tool for standard cell design Routing tool: • Starts with the placement results • Specifies positions of wires that connect pins

  3. Routing Model • Regular-net routing • Regular nets: wires within each channel • Fabrication model:2-layer VH model • Feed-through routing • Feed-throughs: wires crossing multiple channels • Fabrication model • Separate (the third) metal layer for vertical wires • Horizontal wires share the same layer with regular nets

  4. Feed-through Routing • Goal: Specify the assignment of horizontal feed-through wires to the channels • Model each channel as a big track • Problem solved using channel routing algorithm • Pin locations may NOT necessarily be at the edges of the big channel

  5. Regular-net Routing • Goal: Specify the routing configuration within each channel • A typical channel routing problem • Routing process needs to take into account the feed-through wires • Vertical feed-through wires: • Routed in a separate layer • No contributions to horizontal/vertical constraints • Horizontal feed-through wires: • Routed in the same layer with horizontal regular wires • Contribute to horizontal constraints • No contribution to vertical constraints due to the absence of pins

  6. Core Algorithm and Handling of Exception Cases • Both stages modeled as channel routing problem --- the Yoshimura-Kuh algorithm is used • Exception case: loops in vertical constraints • Solution: output a message indicating the detection of the loop, and immediately proceed to the routing of the next channel • In feed-through routing: • Possible exception case:fixed channel (big track) quantity --- might be insufficient for fulfilling horizontal&vertical constraints of feed-throughs • Solution: proceed to regular-net routing immediately, and ignore feed-through wires in regular-net routing phase

  7. Output Specification Format Net i : (PinPosition1, PinPosition2,...) [LeftmostPosition, RightmostPosition] TrackNumber

More Related