SlideServe
Menu
Préférences
© SlideServe · v2026

Hands on GPS Activities

val avatar
11 diapositives · 297 Views · Oct 06, 2014

Hands on GPS Activities. Virginia Geospatial Extension Program. Activities. Using a GPS Capturing a Waypoint Saving a track Estimating area Navigating to a Waypoint Inputting Coordinate Location by Hand. Using a GPS. Satellite page. Map page. Compass page. Main menu. Mark waypoint.

Hands on GPS Activities - slide 1
01 / 11Hands on GPS Activities
1 / 17

Télécharger la présentation

Hands on GPS Activities
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Hands on GPS Activities Virginia Geospatial Extension Program

  2. Activities • Using a GPS • Capturing a Waypoint • Saving a track • Estimating area • Navigating to a Waypoint • Inputting Coordinate Location by Hand

  3. Using a GPS Satellite page Map page Compass page Main menu Mark waypoint

  4. Using a GPS • Hold unit in front of you, facing sky • Be careful not to place thumb over top area of GPS unit (block antennae reception)

  5. Capturing a Waypoint • To capture a waypoint press & hold the Rocker key straight down • To accept the waypoint select OK or To change the name highlight the name field* & press Enter to open the on-screen keypad, select OK twice when done *

  6. Saving a Track • Using the Page key, find the Main Menu page • Select the Tracks icon & push enter • Save the entire track or Select the beginning & ending points for the track • Select OK

  7. Estimating Area • Using the Page key, find the Main Menu page • Highlight the Tracks icon & push Enter • Use the Menu/Find key to open the Menu options • Highlight <Area Calculation> & push Enter • The Area Calculation page will open

  8. Estimating Area Continued • Select Start on the Calculate Area page • Walk the area to be measured • Make sure to close the polygon • Select Stop on the Calculate Area page • Area will be displayed, Units of measurement can be altered • To save track, select Save

  9. Navigate to a Waypoint • Using the Page key, find the Main Menu page • Highlight Find icon & push Enter • Highlight Waypoints & push Enter • Highlight a waypoint & push Enter • Highlight “Go To” at the bottom right of the page • Map page will open showing the cardinal direction • Using the Page key, find the Compass Page and it will show the compass direction & distance to your waypoint

  10. Inputting Coordinate Location by Hand • To input an X,Y coordinate press & hold the Rocker key straight down • Instead of accepting the waypoint you will CHANGE the X,Y coordinate to your desired location • To change the location, highlight the Location field* & press Enter to open the on-screen keypad • Input the location using the keypad • When done, highlight OK & press Enter

  11. Any Questions? John McGee Geospatial Extension Specialist jmcg@vt.edu 540-231-2428 Jennifer McKee Geospatial Project Developer jmckee@vt.edu 540-231-9115