1 / 38

PRELUDE V5 Inspect : 3D metrology integrated in the V5 environment

Logo. PRELUDE V5 Inspect : 3D metrology integrated in the V5 environment. Place, Date. 3D metrology integrated in the V5 environment. MDTVISION launches PRELUDE V5 Inspect.

varian
Télécharger la présentation

PRELUDE V5 Inspect : 3D metrology integrated in the V5 environment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Logo PRELUDE V5 Inspect : 3D metrology integrated in the V5 environment Place, Date 3D Metrology competence center

  2. 3D metrology integrated in the V5 environment 3D Metrology competence center

  3. MDTVISION launches PRELUDE V5 Inspect • After 12 months development under CAAV5 of DASSAULT Systèmes, MDTVISION known as Inspection leader launches PRELUDE V5 Inspect a metrology workbench integrated in CATIA V5. • Part-program creation on CATIA native data • Homogeneous user interface V5 environment • On-line + Off-line solution • Independence among measurement hardware manufacturers : 14 direct drivers including universal I++ DME client. 3D Metrology competence center

  4. PRELUDE V5 Inspect : A complete solution • ONLINE programming (auto-teach mode) • Connection to various measurement systems & accessories • Geometrical & surfacic measurement (ISO 1101 GPS tolerancing) • Report output for analysis • OFFLINE programming • Non contact measurement (creation & post-computation of point clouds) 3D Metrology competence center

  5. PRELUDE V5 Inspect the answer to various needs • Manual measurement in « investigation » mode by point surface projection with automated geometry nominal features extracting from CAD during measurement process • Assistance in tuning metrology fixtures & complex assembly setup • Serial parts inspection in DCC mode • Statistical Process Control (SPC) for tuning manufacturing process 3D Metrology competence center

  6. PRELUDE V5 Inspect : A modular solution 3 basic packages : Off-line + On-Line On-Line Off-line 5 Options : DCC auto Rotary table CMM error mapp Cloud Inspect Auto-change 14 Drivers : (+ standards drivers) FARO Tracker API2 Tracker API3 Tracker FARO arm CIMCORE arm ROMER arm METRONOR ACTICM METRIS laser KREON laser FARO laser I++ DME CMM ZEISS ME5007 Controller 3D Metrology competence center

  7. PRELUDE V5 Inspect : a perfect integration in CATIA V5 • User interface matching with CATIA V5 concepts • Working on native CATIA V4/V5 data • Use of standard interfaces of CATIA V5 • Iges, STEP, PRO/E, UG, Solidworks, … • PRELUDE V5 Inspect integrated under a new V5 workbench • Single switch available between design (Part Design), Digital Mockup (DMU), Functional Tolerancing & Annotations (FT&A) & PRELUDE V5 Inspect • Easy license management & floating access to common server available between CATIA V5 et PRELUDE V5 Inspect • Complete integration in CATIA V5 PPR (Product, Process, Resources) • Visualization of measurement tasks in the tree to facilitate the user interface 3D Metrology competence center

  8. Tracked stylus Laser trackers Manual/DCC CMM’s Portable arms Laser Scanners Universal I++ DME driver PRELUDE V5 Inspect: An opened solution 3D Metrology competence center

  9. 3 basic packages : Off-line + On-Line On-Line Off-line Basic packages 5 Options : DCC auto Rotary table CMM error mapp Cloud Inspect Auto-change 14 Drivers : (+ standards drivers) FARO Tracker API2 Tracker API3 Tracker FARO arm CIMCORE arm ROMER arm METRONOR ACTICM METRIS laser KREON laser FARO laser I++ DME CMM ZEISS ME5007 Controller 3D Metrology competence center

  10. PRELUDE V5 Inspect On-Line • On-line part-program creation on CAD file • Geometry features measurements • Free-form surfaces & curves measurement • Investigation mode measurement by instantaneous projection (surfaces & each geometry feature) • Powerful alignment possibilities (isostatic or hyperstatic by bestfit under individual constraints…) 3D Metrology competence center

  11. PRELUDE V5 Inspect On-Line : Reports output • Automated reporting output to facilitate analysis (EXCEL, JPEG,…) : • Automatic Inserting of graphic views associatedto tolerance features • Reports customization via MS Excel macros, templates,… • Shading render reporting with automatic stickers layout views • Graphic Print out layout customizable 3D Metrology competence center

  12. PRELUDE V5 Inspect Off-Line • CMM’s workcell devices configuration (Probe heads, probes, auto-change,...) • Part setup & alignment according to probe head orientation on CMM • Inter-action if alignment already measured • Paths generating (geometry, surfaces & curves, paths editor assistance…) • Simulation & display of collisions • Instantaneous Switch OFFLINE/ONLINE (path tuning on CMM updating OFFLINE) 3D Metrology competence center

  13. 3 basic packages : Off-line + On-Line On-Line Off-line Options 5 Options : DCC auto Rotary table CMM error mapp Cloud Inspect Auto-change 14 Drivers : (+ standards drivers) FARO Tracker API2 Tracker API3 Tracker FARO arm CIMCORE arm ROMER arm METRONOR ACTICM METRIS laser KREON laser FARO laser I++ DME CMM ZEISS ME5007 Controller 3D Metrology competence center

  14. PRELUDE V5 Inspect: DCC option • Measurement path creation in auto-teach mode (CMM’s Joystick) • Measurement path creation on CAD (surface points, curve points, section features). • Motorized probe heads driving (PH9, PH10, RDS…) • Semi-automatic calibration or automatic calibration on multi-calibration spheres • Twin CMM’s driving • Path generating assistance geometry features (planes, lines, circles,…) • Editing, step by step modes, to adjust the final path … • Graphic simulation of paths before running it on CMM • Serial part measurement & patterns • Operator level part-programs to put Cmm’s in « self-service » mode 3D Metrology competence center

  15. PRELUDE V5 Inspect: Cloud Inspect option • Inspection on point cloud files digitized by various scanner technologies • Driving the digitizing process (calibration, scanning paths, density,…) mixing Renishaw contact probe & scanner • Complete 3D Metrology in one single part-program on geometric & free form surface features (GD&T) with automatic tracability of point cloud files • Comparison point cloud/CAD or point cloud / point cloud • Color mapping output, dimensional & free-form surface deviations • Working Methodologies : • Digitizing then comparison with CAD • Comparison between various points clouds • Auto-teaching measurement automated • Serial parts measurement with statistic process control (SPC) 3D Metrology competence center

  16. PRELUDE V5 Inspect: Auto Change Option • Auto-change racks driving ACR1, MCR20, SCR200, + other brands via I++DME,… • Probe matrix defining probe N° into the matching rack N° • Calibration management & path if without I++DME • Safety zone management between probe & auto-change rack while measuring parts. 3D Metrology competence center

  17. PRELUDE V5 Inspect: CMM’s Error mapping Option • CMM’s geometry inaccuracy decreasing through software opened error mapping. • No protected utility software required • User manual available to help any calibration services company entering his matrix after laser interferometer & gauge checking. • Template Read & write File given • Measurement check tool with or without software compensation to evaluate the error mapping impact. 3D Metrology competence center

  18. PRELUDE V5 Inspect: Rotary table Option • Rotary table driving types: • DCC • Manual with hardware link (RS232,…) • Manual without hardware link • Manual indexed • Automatic indexed • ONLINE: paths created in Auto-teach mode • OFFLINE: creation & simulation of paths in CAD interface 3D Metrology competence center

  19. 3 basic packages : Off-line + On-Line On-Line Off-line Drivers 5 Options : DCC auto Rotary table CMM error mapp Cloud Inspect Auto-change 14 Drivers : (+ standards drivers) FARO Tracker API2 Tracker API3 Tracker FARO arm CIMCORE arm ROMER arm METRONOR ACTICM METRIS laser KREON laser FARO laser I++ DME CMM ZEISS ME5007 Controller 3D Metrology competence center

  20. PRELUDE V5 Inspect: ACTICM Driver • Manual measurement in On-line mode with tracked stylus • Investigation measurement • « Leapfrog » alignment on any kind of feature after setup changing (positioning of camera or measured part) • Measurement in guidance mode with probe real time display & dynamic auto-zoom on target point with approach vumeter displayer • Automatic section measurement via crossing plane 3D Metrology competence center

  21. PRELUDE V5 Inspect: METRONOR driver • Driving 3 METRONOR camera types • Investigation measurement with various styli sets • Wifi communication between stylus & PC • Big volume parts inspection • « Leapfrog » alignment on any kind of feature after camera or measured part setup change • Sections & border shapes measurement 3D Metrology competence center

  22. PRELUDE V5 Inspect: Driver Laser Tracker API 2 • Manual measurement in On-line mode with tracked mirrors • Investigation Measurement • « Leapfrog » alignment on any kind of feature after tracker or measured part setup change • Guided measurement mode with mirror target real time display & dynamic auto-zoom on target point with approach tuning displayer • Automatic section measurement via crossing plane 3D Metrology competence center

  23. PRELUDE V5 Inspect: Driver Laser Tracker API 3 • Manual measurement in On-line mode with tracked mirrors • Investigation Measurement • « Leapfrog » alignment on any kind of feature after tracker or measured part setup change • Guided measurement mode with mirror target real time display & dynamic auto-zoom on target point with approach tuning displayer • Automatic section measurement via crossing plane • DCC measurement (automatic re-measurement of targets) • « Intelliprobe » management 3D Metrology competence center

  24. PRELUDE V5 Inspect: Driver Laser Tracker FARO • Manual measurement in On-line mode with tracked mirrors • Investigation measurement mode • « Leapfrog » alignment on any kind of feature after tracker or measured part setup change • Guided measurement mode with mirror target real time display & dynamic auto-zoom on target point with approach tuning displayer • Automatic section measurement via crossing plane • DCC measurement (automatic re-measurement of targets) • Tracker functionalities management (auto target search, temperature compensation,…) 3D Metrology competence center

  25. PRELUDE V5 Inspect: Driver MMT Zeiss • ZEISS CMM’s driving via CMM-OS communication protocol (developed by ZEISS) • Calibration process managed by CMM-OS as error mapping compensation preserving original CMM’s accuracy • Driving manual Cmm’s (horizontal arms) & DCC • RDS & DSE Probe heads management 3D Metrology competence center

  26. PRELUDE V5 Inspect: ME5007 DCC controler driver • Metrologic Group ME5007 Controller driver • Driving horizontal arm Cmm’s & bridge machines • Motorized probe heads managementincluded 3D Metrology competence center

  27. PRELUDE V5 Inspect: METRIS Laser scanner driver • Driving Metris LC50 & XC50 on Renishaw UCC controllers or others • Automated calibration process of PH10 angular positions with video settings (Laser power, integration time & noise filtering,..) • DCC laser digitizing • Contact probe management & scanner in same part-program • Post-computation on geometrical & surfacic features in point cloud • Color mapping comparisonpoint cloud/CAD • Part program can be used on another CMMwith contact probe 3D Metrology competence center

  28. PRELUDE V5 Inspect: KREON Laser scanner driver • Driving Zephyr KZ25,KZ50 & KZ100 scanners on Renishaw UCC controllers or others. • Calibration process of PH10 angular positions with video settings (Laser power, integration time & noise filtering,..) • DCC laser digitizing storing each video settings into each path • Contact probe management & scanner in same part-program • Post-computation on geometrical & surfacic features in point cloud • Color mapping comparison point cloud/CAD • Part program can be used on another CMM with contact probe 3D Metrology competence center

  29. PRELUDE V5 Inspect: FARO ScanArm driver • Integration of ScanArm FARO laser scanner SDK • CCD settings, probe + laser scanner calibration, automatic probe detection • Scanning line display to help completing the point cloud. • Complete post computation on geometrical & surfacic features into point cloud or coming from touch hard probe • Color mapping comparison point cloud/CAD • Complete report output 3D Metrology competence center

  30. PRELUDE V5 Inspect: CIMCORE Arm driver • Driving old System 6 3000i/Stinger & new generation arms « Infinite » • Investigation measurement with « hard probe » or Renishaw TP • Automatic probe detection • « Leapfrog » alignment on any kind of feature after setup changing (re-positioning of arm or measured part) • Guided measurement mode with probe real time display & dynamic auto-zoom on target point with approach tuning displayer • Automatic section measurement via crossing plane • Shrink factor available in CAD coordinate system 3D Metrology competence center

  31. PRELUDE V5 Inspect: FARO Arm driver • Driving old Silver/Gold & new generation arms Platinum, Titanium • Investigation measurement with « hard probe » or Renishaw TP • « Leapfrog » alignment on any kind of feature after setup changing (re-positioning of arm or measured part) • Guided measurement mode with probe real time display & dynamic auto-zoom on target point with approach tuning displayer • Automatic section measurement via crossing plane • Shrink factor available in CAD coordinate system 3D Metrology competence center

  32. PRELUDE V5 Inspect: ROMER Arm driver • Driving old System 6, LX series & new generation arms « Sigma » via Ethernet link • Investigation measurement with « hard probe » or Renishaw TP • Automatic probe detection • « Leapfrog » alignment on any kind of feature after setup changing (re-positioning of arm or measured part) • Guided measurement mode with probe real time display & dynamic auto-zoom on target point with approach tuning displayer • Automatic section measurement via crossing plane • Shrink factor available in CAD coordinate system 3D Metrology competence center

  33. PRELUDE V5 Inspect: Universal I++ DME driver (Client side) • Universal I++DME communication protocol • Free of charge on RENISHAW UCC controller • Benefits: Calibration management assumed by CMM’s manufacturer’s I++DME server like Cmm’s error mapping preserving original Cmm’s accuracy • Driving all Cmm’s manufacturers « proprietary » accessories (Continuous scanning heads like VAST (Zeiss), Renishaw SP80, SP600, SP25 etc,…) • Perennity & software harmonization ensured 3D Metrology competence center

  34. PRELUDE V5 Inspect : Hardware pre-requisite • Hardware pre-requisite: • According to the developpement platform used & pre-requisite of DELMIA used for product, PRELUDE V5 Inspect has got the same than CATIA V5. The whole configurations validated by DASSAULT Systèmes are available on their web site : http://www.3ds.com/fr/support/workstations-peripherals/windows/certified-workstations-list/ Example of suggestedconfiguration : 3D Metrology competence center

  35. PRELUDE V5 Inspect : A large distribution network • PRELUDE V5 Inspect is distributed worldwide through following companies : 3D Metrology competence center

  36. Ils nous font confiance … ’ Ficocipa • Phillips (France/Belgique) • AQS (base POLI France) • Gates • Pixley Richards • AMP ECTM • Gaz De France • Pont à Mousson • APO MBPM • General Electric Power Systems (UK) SAFE ASCOFORGE • • ARO • Schligler SA GE Energy Products Belfort • Atlancim • • GIAT INDUSTRIES SEH • Automotive Europe Prototype • • Sermati GOM france • Benteler Automotive • • Groebli Seroma • Bolton Plastic • • Setforges Hutchinson • Bombardier (transport & produit récréatifs) • • Hyundai Design Center ( Korea ) Shanghai Visteon Yanfeng Automotive + Clutch • Bourbon/ Fabi Automobile • • Factory (China) I.G.A. (IRAUSA france ) C.E.A./D.A.M. • • Sodev • IMAQS (Distribution in Belgium ) CERTA • • Stévenin Nollevaux § Inergy Automotive System CINI SA Tomblaine • Stiga (Suède) § Key Plastic International C.M.H. • • TEKSID Group Fonderies Du • Kréon technologies CPRO/CPM • Poitou/S.B.F.M./F.A.C. • Krupp Mavilor Centre de Ressources Techniques de Morlaix • T.I.M. ( Carwall Group) • • Laroche SA Dassault Aviation (Biard & Martignas ) • Thyssen Krupp ( Sofedit ,TKA Tallent Chassis …) • • M3D (Distribution MMT MORA en France) DBM Reflex • TRW France • • M3M D.G.A. (A.I.A.) • Valeo • • Metrolec DSO DI SANTE • Unitools (République Tchèque) • • Mitutoyo (Développement Logiciel OFF - LINE TOOLCIM Duarte Groupe • Zeiss (" Virtual - Cmm" interface entre Delmia & • CADPAK Win ) Ecole Centrale de Lille • Umess ) MARKIV ECM Hivet • Valmold • • New Holland Education nationale (Tous lycées/IUT) • Waeles Industries ( Luchard ) • • Oxford Automotive ( Aubry , Douai, ECRIM...) E.N.S. CACHAN • Wagon Automotive • • Paulstra ESTANFOR • Wimetal (groupe Tenneco ) • 3D Metrology competence center

  37. France : Minsk Hamburg • SAS, capital : 3 353 K€ • 400+ employees • Certified ISO 9001 • Regional proximity MDTVISION Les Ulis Paris Munchen Vienna Strasbourg Zurich Allemagne : Lyon • 130 employees • Certified ISO 9001 • Regional proximity Aix en Provence Toulouse www.mdtvision.com Structure Offshore MINSK 28 years developement in PLM solutions & services • 40+ employees • Owned at 100%, since 1993 • Fully Integrated to projects 1979 : Creation of DATAVISION : development & sales of EUCLID, 3D Solid CAD/CAM modeler 1993 : EUCLID 3 launch 1998 : Signature of a partnership agreement with IBM & Dassault Systèmes for CATIA, ENOVIA, SMARTEAM distribution. EADS Matra Datavision becomes services provider in PLM2003 : IBM acquires EADS Matra Datavision which becomes MDTVISION 2006 : MDTVISION becomes CAA Partner of DASSAULT Systèmes for 3D metrology solutions 2007 : PRELUDE V5 Inspect launch MDTVISION : 28 years experience in PLM & industry Nantes www.mdtvision.com 3D Metrology competence center

  38. Yannick JOUAULT+33 6 85 04 20 99y-jouault@mdtvision.com Your contact : Visit our Web site : MDTVISION, an IBM Company http://www.mdtvision.com/en/offre_metrologie_3D.php 3D Metrology competence center

More Related