80 likes | 159 Vues
Traffic Monitoring on CJK-Network. 16th CJK NGN-WG 200 9 . 7.22-24 TTC Nobuyuki NAKAMURA ( Oki Electric Industry Co., Ltd.) nakamura758@oki.com. Overview.
E N D
Traffic Monitoring on CJK-Network 16th CJK NGN-WG 2009.7.22-24 TTC Nobuyuki NAKAMURA (Oki Electric Industry Co., Ltd.) nakamura758@oki.com
Overview Given the situation of interconnectivity among various NGN networks,MPM will become a very important node for traffic observation.We have been investigating the possibility of analyzing network quality by observing traffic at MPM. We will perform monitoring at MPM with the following traffic paths using our monitoring method(see appendix ): ・Traffic Path 1:China/Korea - Japan RTP traffic ・Traffic Path 2:Japan – China/Korea - Japan RTP loopback traffic China Korea MPM MPM RTCP-XR RTCP-XR Network TAP MPM Japan Storage Collect RTCP Network load Correlation Analysis
Traffic Path 1: RTP traffic between China/Korea and Japan SIP Phone SIP Server ・We will set up one of terminals in China/Korea NW, and another terminal and SIP server in Japan NW. ・We will analyze the behavior between collected packets on MPM and network load, and feed backthis analysis to the Traffic Path 2 experiment with loopback at China/Korea MPM. Multi Media session MPM MPM Network load Japan Network TAP Collect packets Storage
Outline of experiments & researches Detection of the network anomaly throughtraffic analysis at MPM with the following steps. #1 Create Network anomaly by intentionally generating instability to wireless link #2 Collect packets capturing data at MPM (Japan) These packets might contain not only our experiment traffic but also various traffic in CJK testbed. #3 Extract the packets that relates to network anomaly through our analysis. #4 Detect network anomaly point i.e. instability of wireless link in Japan In #3 and #4, we will utilize our analysis method (see appendix) so that we can confirm whether our method is useful or not. Various CJK traffic China MPM MPM Japan #1 create Instable wireless link Our session Network TAP #2 Collect packets #3#4 detect Instability Storage
Traffic Path 2: Japan-China/Korea-Japan traffic monitoring Purpose Verification of effective network load or anomaly for Traffic Path 1 experiment by testing various network load or anomaly Step#1-#4 will also be performed in this path. Next plan Evaluate on the Japan-China-Korea-Japan triangle path. SIP Phone SIP Server Multi Media session MPM MPM network load China/Korea Network TAP Japan Collect packets Return point of traffic routes Storage
Current progress Equipment of Japan NW Setup SIP-server and SIP-Phone terminal. Setup and check the VPN connection to Japan NW from experiment room. Traffic monitoring at Japan MPM is operating continuously. Traffic Path1: China/Korea – Japan traffic path Check the connectivity from a terminal at China NW to another terminal and SIP server at Japan NW. (July 20) Step #1 and #2 (scheduled on July 20) Traffic Path 2: Japan – China/Korea – Japan traffic path Setup return point of traffic routes at Korea MPM.(Done) Collecting packets.(Done) Step#3 and #4 are executing now. We will use this experimental system to experiment about various network anomaly by the improvisation, according to the result of step #3 or #4.
Schedule Traffic Path1(China – Japan ) Traffic Path 2 (Japan – China/Korea – Japan ) Step #3 Step #4
Appendix References (for pp.4) Ikada and Hamaguchi, “Improved Approximate Frequency Counts Algorithm based on “Lossy Counting””, IEICE Technical Report Vol.107, No.524, pp.43-47, 2008. Ikada, Nakamura and Hamaguchi, “Network Traffic Prediction for Network Quality Anomaly Detection by RTP Communication Monitoring”, IEICE Technical Report Vol.109, No.79, pp.67-72, 2009. Nakamura, Ikada, “Detection Method for Network Quality Degradation by using Network Characteristics”, IEICE Technical Report Vol.108 No.458, pp.167-172, 2009. Thank you for your attention. This work is partly supported by the National institute of Information and Communications Technology (NICT).