1 / 17

Design and Technology Dylunio a Thechnoleg

Design and Technology Dylunio a Thechnoleg. Health and Safety Considerations Ystyriaethau Iechyd a Diogelwch. January 2012. Welcome to an open discussion regarding safety related to design and technology in schools

lionel
Télécharger la présentation

Design and Technology Dylunio a Thechnoleg

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design and TechnologyDylunio a Thechnoleg Health and Safety Considerations Ystyriaethau Iechyd a Diogelwch January 2012

  2. Welcome to an open discussion regarding safety related to design and technology in schools • Croeso i ynglyn a drafodaeth ynghylch diogelwch sy’n berthnasol i dylunio a thechnoleg mewn ysgolion Croeso/Welcome

  3. Applicable Legislation • Issues for schools • What do schools need to do? • Next steps Agenda

  4. Rhaidinifyndi’rSaesnegnawr • Health and Safety at Work Act-Umbrella legislation • Provision and Use of work Equipment Regulations (PUWER) • Management of Health and Safety at Work Act (MHSWR) • Control of Substances Hazardous to Health Regulations (CoSHH) • Personal Protective Equipment Regulations (PPE) • Workplace Regulations • Manual Handling (operations) Regulations (MHO) Legislation/Deddfwriaeth

  5. Main provisions: • Section 2 Employers responsibilities re: employees • Section 3 Employers responsibilities re: non-employees • Section 7 Employees responsibilities • (Dyw’r HASAWA Act ddim ar gael yn Gymraeg) Health and Safety at Work Act

  6. Main Provisions • Risk Assessment • Prevention Principles • Arrangements • H&S Advice • Procedures for Imminent Danger • Information, instruction & training • Co-operation and Co-ordination • Young Persons • Pregnant/expectant mothers Management of Health and Safety at Work Regulations

  7. Main requirements: • Adequate lighting • Ventilation • Temperature • Welfare Provision • Glazing • Cleanliness Workplace Regulations

  8. Main Provisions: • Risk Assessment • Selection of PPE • Fitting of PPE • Storage & Cleaning of PPE • Respiratory Protective Equipment (RPE) PPE Regulations

  9. Main requirements: • Risk Assessment • Prevention or Control of Exposure • Use of Control Measures • Maintenance & Testing of Control Measures • Monitoring Exposure • Health Surveillance • Information, instruction & training CoSHH Regulations

  10. Main Provisions • Suitability of Equipment • Maintenance • Inspection • Risk Assessment • Information, instruction & training • Dangerous parts of machinery • Temperature • Controls • Change control • Isolation • Stability • Lighting PUWER Regulations

  11. Fume Cupboards • Woodworking and machining operations ventilation systems • Equipment Guarding • Emergency/power down arrangements • Maintenance and Testing • Risk Assessment Issues for Schools (equipment)Materion ar gyfer Ysgolion (offer)

  12. Training- staff must be competent to not only use the equipment safely but also have sufficient knowledge and experience to train others (Coleg Sir Gar courses) CLEAPSS L79 • Age Restrictions – after a risk assessment, pupils below a certain age may not be permitted to use certain equipment, isolation locks for high risk equipment (BS4163) What do schools need to do? (1)Beth sydd angen i ysgolion wneud? (1)

  13. Class Size – may determine the amount of supervision available (recommended one competent person per 20 pupils (max)) • Floor markings – indicate ‘safe’ areas for pupils and staff • Housekeeping – unobstructed equipment (safety stops), materials, tools etc. • Guarding –adequate in design and maintenance and machine brakes What do schools need to do? (2)Beth sydd angen i ysgolion ei wneud? (2)

  14. Ventilation – required to be maintained and with an efficiency test every fourteen months CLEAPSS G225 • Maintenance records (bear in mind manufacturers’ recommendations) CLEAPSS L254 • Risk Assessments and audits CLEAPSS G79 • Personal Protective equipment – supply, suitability, maintenance and replacement What do schools need to do? (3)Beth sydd angen i ysgolion ei wneud? (3)

  15. CCC schools guidance documents & Corporate safety team • Design and Technology Association http://www.data.org.uk/ • CLEAPPS http://www.cleapss.org.uk/ Specifically L235 Managing Risk Assessment in Design and Technology L245 School Science Service Guide BS 4163:2007 Health and safety for design and technology in schools and similar establishments. Code of practice PD 5304:2005 Guidance on safe use of machinery Guidance AvailableCanllawiau sydd ar gael

  16. Assess what equipment you have available • Risk assess with current control measures • Determine what additional controls (if any) are required • Record results • Implement new controls Next StepsY Camau Nesaf

  17. Diolch i chi am wrando, oes cwestiynau?Thank you for listening, any questions ?

More Related