SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

Isolation Transformer

Abbott_Tech avatar
Abbott_Tech
8 diapositives · 1.4K Views · Dec 10, 2015

Isolation transformers transfer electrical power from the alternating current source (AC) power to the destination device or equipment while isolating the power supply from the powered device for safety reasons.

Isolation Transformer - slide 1
01 / 8Isolation Transformer
1 / 17

Télécharger la présentation

Isolation Transformer
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. Abbott Technologies PRESENTS Isolation Transformers

  2. About: • Made of wound copper coils over each other. • Can isolate an alternating current from the circuit. • Transfers electrical power from the alternating current source (AC) power to the destination device. • Isolate the power supply from the powered device for safety reasons. • Used to protect against electric shock.

  3. Provide galvanic isolation to suppress electric noise to delicate electric components. • Built with special insulation between the secondary and the primary. • Block the DC component transmission in signals from one circuit to another. • Allow the AC components to pass their signals. • Block any interference that can be caused by ground loop.

  4. Isolation Transformer operation • Designed with acute attention to capacitive coupling between the two windings. • The capacitance between the secondary and primary windings would pair AC current from the main winding to the secondary winding. • Reduces the coupling significantly of common mode noise. • The differential noise can magnetically couple from the secondary to the primary of an isolation transformer.

  5. Applications Of Isolation Transformers • Used in many different electronic devices that contain circuits • that cannot handle or are too sensitive to handle the alternating current directly. • Called as power adapters for computer laptops,cell phones and many other electronic devices. • Voltage heights supplied to homes and apartments is higher than the required amounts the electronic devices can consume.

  6. Advantages Of Isolation Transformers • Increase and decrease alternating currents. • Can handle any amounts of voltages necessary. • Built to scale depending on the number of times the coils are wound. • Reduce electromagnetic and electrical interruptions from other power devices and sources. • Improve signal strength in wireless and radio wave communications.

  7. Abbott Technologies 8203 Vineland Ave. Sun Valley, CA 91352 Sales: (800) 367-8200 Tech. Support: (818) 504-0644 Fax: (818) 768-0395 For more information visit: http://abbott-tech.com

  8. Thank You