1 / 6

References

References GENERAL REFERENCES ON TRANSMISSIONS “Automotive Handbook” , Bosch, IV ed., 1996. U. Kiencke, L. Nielsen, “ Automotive Control Systems ”, Springer, 2000.

Gabriel
Télécharger la présentation

References

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. References GENERAL REFERENCES ON TRANSMISSIONS • “Automotive Handbook”, Bosch, IV ed., 1996. • U. Kiencke, L. Nielsen, “Automotive Control Systems”, Springer, 2000. • B. Jacobson, “Automotive Power transfer & Management Lecture Notes”, Chalmers University in Sweden, 2000, available at http://www.mvd.chalmers.se/~beja/ • M. Link, B. Vob, E. Eggert, R. Nasdal, “The Automated Shift Transmission - Possibilities and Limits in Production-Type Vehicles”, SAE 2001-01-0881 • G.Wagner, “Application of Transmission Systems for Different Driveline Configurations in Passenger Cars”, SAE 2001-01-0882

  2. References AUTOMATED MANUAL TRANSMISSION - Control (1) • L. Glielmo, F. Vasca, “Optimal Control of Dry Clutch Engagement”, SAE 2000-01-0837. • L. Glielmo, F. Vasca, “Engagement Control for Automotive Dry Clutch”, American Control Conference, 2000. • F. Garofalo, L. Glielmo, F. Vasca, "Smooth Engagement for Automotive Dry Clutch'', IEEE Conference on Decisions and Control, USA, 2001 (submitted to). • A. Bemporad, F. Borrelli, L. Glielmo, F. Vasca, "Hybrid Control of Dry Clutch Engagement'', European Control Conference, Spain, 2001. • A. Bemporad, F. Borrelli, L. Glielmo, F. Vasca, "Optimal Piecewise-Linear Control of Dry Clutch Engagement'', IFAC Workshop Advances in Automotive Control, Karlsruhe, Germany, 2001 • J. Fredriksson, B. Egardt, “Nonlinear Control applied to Gearshifting in Automated Manual Transmission”, IEEE CDC01, Sidney, Australia, 444-449 • B. K. Powell, K. E. Bailey, S. R. Cikanek, “Dynamic Modeling and Control of Hybrid Electric Vehicle Powertrain Systems”, IEEE Control Systems Magazine, Oct. 98, 17-33 • A. Szadkowski, R. B. Monford, “Clutch Enagement Simulation: Engagement Without Throttle”, SAE 920766, 103-117

  3. References AUTOMATED MANUAL TRANSMISSION - Control (2) • G. Ercole, G. Mattiazzo, S. Mauro, M. Velardocchia, F. Amisano, R. Flora, “Co-operating Clutch and Engine Control for Servoactuated Shifting through Fuzzy Supervisor”, SAE 1999-01-0746, 101-109 • J. M. Slicker, R. N. K. Loh, “Design of Robust Vehicle Launch Control System”, IEEE Trans. On Control System Technology, vol. 4 no. 4, 1996, 326-335 • K. Pfeiffer, R. Isermann, “Automatic Control of Vehicle Startup for Emission Tests on Engine Dynamometers”, Americn Control Conference, Washington, 1995, 2596-2600 • H. D. Lee, S. K. Sul, H. S. Cho, J. M. Lee, “Advanced Gear Shifting Clutching Strategy for Parallel Hybrid Vehicle with Automated Manual Transmission”, IEEE IAS, 1998, 1709-1714 • F. Amisano, G. Serra, M. Velardocchia, “Engine Control Strategy to Optimize a Shift Transient During Clutch Engagement”, SAE 2001-01-0877 • C. Bader, “Powertrain Electronics - Progress on the Use and Development of the Computer Aided Gearshift Systems”, SAE 901160

  4. References AUTOMATIC TRANSMISSION • B. Moir, “An investigation into objective measures of gear-shift quality”, Proc. Instn Mech Engrs, vol 209, part D Journal of Automobile Engineer, 1995, 245-258 • A. Haj-Fraj, F. Pfeiffer, “Optimization of Gear Shift Operations in Automatic Transmissions”, IEEE AMC2000, Nagoya, 469-473 • K. Hayashi, Y. Shimizu, Y. Dote, A. Takayama, A. Hirako, “Neuro Fuzzy Transmission Control for Automobile with Variable Loads”, IEEE Trans. On Control Systems Technology, vol. 3 no. 1, 1995, 49-53 • T. Minowa, T. Ochi, H. Kuroiwa, K. Z. Liu, “Smooth Gear Shift Control Technology for Clutch-to-Clutch Shifting”, SAE 1999-01-1054 • F. Jauch, “Model-Based Application of a Slip-Controlled Converter Lock-Up Clutch in Automatic Car Transmissions, SAE 1999-01-1057 • L. Mianzo, “A Transmission Model for Hardware-in-the-loop Powertrain Control System Software Development”, IEEE CCA 00, Anchorage, Alaska, 2000

  5. References TRANSMISSIONS - Actuators • Y. Esenovsky-Lashkov, D. Polyak, “New concept of automatic control for a passenger car clutch”, Proc. Instn Mech Engrs, vol 210, part D Journal of Automobile Engineer, 1996, 227-233 • Q. Zheng, K. Srinivasan, “Transmission Clutch Pressure Control System: Modeling, Controller Development and Implementation”, SAE 2000-01-1149 • P. A. Christensen, “Using CAE Simulation Tools to Study the Performance of a 2-Stage Variable Force Solenoid Acting on a Clutch”, SAE 2000-01-0116 AUTOMATED MANUAL TRANSMISSION - Clutch characteristics • D. Centea, H. Rahnejat, M. T. Menday, “The influence of the interface coefficient of friction upon the propensity to judder in automotive clutches”, Proc. Instn Mech Engrs, vol 213, part D Journal of Automobile Engineer, 1999, 245-258 • H. Drexl, U. Teichert, M. Dettmar, “Clutch Wear Analyzing Technology: a Tool for Longer Clutch Life”, SAE 982848 • M. Velardocchia, F. Amisano, R. Flora, “A Linear Thermal Model for an Automotive Clutch”, SAE 2000-01-0834

  6. References CONTINUOUSLY VARIABLE TRANSMISSION • E. Spijker, “Steering and Control of a CVT Based Hybrid Transmission for a Passenger Car”, Ph.D. Thesis, Technical University of Eindhoven, 1994 • B. Zhang, H. Wang, J. Li, “Study on Cruise Fuzzy Control for CVT Vehicle”, Intern. Symposium on Advanced Vehicle Control, Ann Arbor, Michigan, 2000 • B.G. Vroemen, A.F. Serrarens, F.E. Veldpaus, “CVT Control: a Hierarchical Approach”, Intern. Symposium on Advanced Vehicle Control, Ann Arbor, Michigan, 2000 • W. Hongyan, Z. Yunshan, Z. Boying, Q. Xiding, “Research on Integrated Control Strategy of CVT for Passenger Cars”, IEEE International Vehicle Electronic Conference, 1999 • S. Liu B. Paden, “A Survey of Today’s CVT Controls”, Conference on Decision & Control, San Diego, California, 1997 • B. Powell, X. Zhang, R. Baraszu, “Computer Model for a Parallel Hybrid Electric Vehicle (PHEV) with CVT”, American Control Conference, Chicago, Illinois, 2000 • B. Jacobson, “Automotive Power transfer & Management Lecture Notes”, Chalmers University in Sweden, 2000, available at http://www.mvd.chalmers.se/~beja/

More Related