1 / 24

Chapter 9

Chapter 9. RLC Circuits Dr. Iyad Jafar. RLC Circuits. Analyze circuits containing R, L and C together Series RLC Parallel RLC Similar to RL and RC circuits, RLC circuits has two parts Source free or natural response Forced / steady state response

Pat_Xavi
Télécharger la présentation

Chapter 9

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 9 RLC Circuits Dr. Iyad Jafar

  2. RLC Circuits • Analyze circuits containing R, L and C together • Series RLC • Parallel RLC • Similar to RL and RC circuits, RLC circuits has two parts • Source free or natural response • Forced / steady state response • Forced Response  a step input causes a step output. • Natural Response  Different and more difficult than RL, RC.

  3. Second-order Differential equation Source-free RLC Circuits We study the natural response by studying source-free RLC circuits. Parallel Source-free RLC Circuit

  4. This second-order differential equation can be solved by assuming solutions The solution should be in form of If the solution is good, then substitute it into the equation will be true. which means s=??

  5. Use quadratic formula, we got Both and are solution to the equation Therefore, the complete solution is

  6. From Define resonant frequency Damping factor Therefore, in which we divide into 3 cases according to the term inside the bracket

  7. Solution to Second-order Differential Equations • α > ω0 (inside square root is a positive value) Overdamped case • α = ω0 (inside square root is zero) Critical damped case • α < ω0 (inside square root is a negative value) Underdamped case

  8. 1. Overdamped case , α > ω0 Example: find v(t) if the initial conditions are vc(0) = 0, iL(0) = -10A α > ω0 ,therefore, this is an overdamped case  s1 = -1, s2 = -6

  9. Then, we will use initial conditions to find A1, A2 From vc(0) = 0 we substitute t=0 … (1) From KCL  At t =0+ … (2)

  10. Solve the equations (1) and (2) A1 = 84 A2 = -84 and the solution is v(t) t

  11. 2. Critical damped case , α = ω0 Example: find v(t) if the initial conditions are vc(0) = 0, iL(0) = -10A α = ω0 , this is an critical damped case  s1 = s2 = -2.45 The complete solution of this case is in form of

  12. Then, we will use initial conditions to find A1, A2 From vc(0) = 0 we substitute t=0 … (1) Therefore A2 =0 and the solution is reduced to Find A1 from KCL at t=0 … (2)

  13. Solve the equation and we got A1 = 420 and the solution is v(t) t

  14. 3. Underdamped case , α < ω0 from The term inside the bracket will be negative and s will be a complex number define Then and

  15. Use Euler’s Identity

  16. 3. Underdamped case , α < ω0 Example: find v(t) if the initial conditions are vc(0) = 0, iL(0) = -10A α < ω0 ,therefore, this is an underdamped case and v(t) is in form where

  17. Then, we will use initial conditions to find B1, B2 From vc(0+) = vc(0-) = 0 we substitute t=0 Therefore B1 =0 and the solution is reduced to Find B2 from KCL at t=0

  18. we got and then the solution is v(t) t

  19. Series RLC Overdamped Critical damped Underdamped Solution

  20. Forced RLC Circuits Similar to RL and RC circuits, the total response is the sum of the transient/natural response and the forced/steady state response X(t) = Xn(t) + Xf(t) Where Xn is one of the three cases Overdamped Critical damped Underdamped And Xf(t) is the value as t ∞ and the constants are found from the initial conditions

  21. Example Find vc(t) This is overdamped case, so the solution is in form

  22. Consider the circuit we found that the initial conditions will be • vC(0) = 150 V • iL(0+) = iL(0-) = 5 A • And the steady state values • vC(∞) = 150 V • iL(∞) = 9 A Using vC(0) = 150 V , we got Using vC(∞) = 150 V , we got Therefore, 1. Vf = 150 2. A1+A2 = 0 ------------(1)

  23. Use the initial condition iL(0) = 5 A, we have to change vc(t) to iL(t) From Next, use KCL on the circle below or

  24. From Substitute iL(0) = 5A ------------------(2) From (1), (2) A1 = 13.5, A2 = -13.5 Therefore,

More Related