1 / 11

Integration of the Spectrometer Solenoid Magnets

Integration of the Spectrometer Solenoid Magnets. Steve Virostek Lawrence Berkeley National Lab. MICE Collaboration Meeting – CM20 February 11, 2008. Integration and Installation Topics. Support structure interfaces Module joint seal and load transmission Subcomponent interfaces

abla
Télécharger la présentation

Integration of the Spectrometer Solenoid Magnets

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Integration of the Spectrometer Solenoid Magnets Steve Virostek Lawrence Berkeley National Lab MICE Collaboration Meeting – CM20 February 11, 2008

  2. Integration and Installation Topics • Support structure interfaces • Module joint seal and load transmission • Subcomponent interfaces • Tracker-to-warm bore, radiation shutter, patch panel, diffuser, iron shield • Power req’ts, cabling & hose connections • Instrumentation and controls Steve Virostek - Lawrence Berkeley National Lab

  3. Translating Platform Steve Virostek - Lawrence Berkeley National Lab

  4. Progress Update • Fab of first magnet support stand is complete • Six mounting pads added to design • Possible issue with clearance around holes • Features added to suppt allow lifting by slinging • Vendor also adding welded lifting rings to vessel • Feature for mounting diffuser added to magnet • Integrated iron shield/TOF shield design done • Magnet interface remains unchanged • Parts to be procured soon Steve Virostek - Lawrence Berkeley National Lab

  5. Progress Update (cont’d) • Helium-to-vacuum window design not done • Preliminary plan was to use AFC style window • Mounting holes not included in magnet spec • Final design of bellows spool under way • Bellows design & price quote obtained from Hyspan • Spool to connect two spectrometer solenoids being designed at RAL (two bellows spools also req’d) • Instrumentation readouts to be ordered soon • Most instrumentation only needed during initial tests Steve Virostek - Lawrence Berkeley National Lab

  6. Module Mounting Provision Six mounting plates added to the support stand base for installation on rails Steve Virostek - Lawrence Berkeley National Lab

  7. Module Lifting Provision Four cutouts added to the support stand side walls for lifting straps Open issues: Will a lifting fixture be required? Can we lift w/iron shield in place? Steve Virostek - Lawrence Berkeley National Lab

  8. Support Stand Modifications Steve Virostek - Lawrence Berkeley National Lab

  9. Iron Shield and TOF Cage Steve Virostek - Lawrence Berkeley National Lab

  10. Spectrometer Solenoid-AFC Module Joint Spectrometer solenoid flange AFC flange 36 bolts on a 1470 mm dia 56 mm Metal seal groove O-ring groove 1372 mm ID bellows Steve Virostek - Lawrence Berkeley National Lab

  11. Magnet Utility Requirements • Cryomech Model PT-415 cryocoolers (4 or 6 each total) • 50 Hz AC: 10.5 kW @ 380/420 V, 3 phase • Cooling: minimum 3 gpm of water @ 80ºF max • 300 A Power Supplies – American Magnetics (3 ea total) • 50-60 Hz AC: 3.5 kW @ 208 V, 3, forced air cooled, rack mnt. • 60 A Power Supplies – Lake Shore Cryotronics (4 ea tot.) • 50-60 Hz AC: 0.3 kW @ 208 V, 3, forced air cooled, rack mnt. • Vacuum: 10-3 torr @ startup thru a 25 mm flanged port • Liquid cryogens: 600 liters LN2, 1000 liters LHe (x2) • Instrumentation monitoring requirements • Various voltages, temperature, He level, heaters, pressure, vac. Steve Virostek - Lawrence Berkeley National Lab

More Related