1 / 69

Service Link for C2 TBB 8051 Student Guide

Service Link for C2 TBB 8051 Student Guide. Service Link for C2. Index Getting started Connecting Software organization Faults Templates Configuration Changing/Adding features Refresh & Flashing Exercises Evaluation. Service Link for C2. Getting Started 1.

aldon
Télécharger la présentation

Service Link for C2 TBB 8051 Student Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Service Link for C2 TBB 8051 Student Guide

  2. Service Link for C2 • Index • Getting started • Connecting • Software organization • Faults • Templates • Configuration • Changing/Adding features • Refresh & Flashing • Exercises • Evaluation

  3. Service Link for C2 Getting Started 1

  4. Service Link for C2 Getting Started -ServiceLink (SLINK) is proprietary software developed for Freightliner LLC -only users that have contractual warranty certification like dealers and their CPWAs -can only be downloaded from accessfreightliner.com This guide is meant for instructional purposes and is not a substitute for the Servicelink users guide. 1-2

  5. Service Link for C2 Getting Started Obtaining a Password www.accessfreightliner.com Click on “Register for web applications” 1-3

  6. Service Link for C2 Getting Started Obtaining a password -complete application -supply vin# for Freightliner product you own -submit -password will be emailed to you 1-4

  7. Service Link for C2 Getting Started Computer Requirements Service Link requires the “Professional Version” of Microsoft operating systems. Consult all other software vendors for their requirements before purchasing a new computer. For any computer related problems contact the Freightliner Help Desk For assistance in using Service Link contact Thomas Built Buses 1-5

  8. Service Link for C2 Getting Started -Click on “Service Link” to download software 1-6

  9. Service Link for C2 Getting Started When you click “Servicelink” any current notices will display. Read them 1-7

  10. Service Link for C2 Getting Started -You must download DLA software Nexiq and Noregon drivers can be downloaded directly from their web sites Only Nexiq and Noregon dlas are approved For Slink -You must download Service Link Offline separately -all other downloads are optional or not required for the use of Slink 1-8

  11. Service Link for C2 Getting Started Noregon DLA -available in parallel or USB cabling -order direct from Noregon 336/768-4337 1-9

  12. Service Link for C2 Getting Started Nexiq Magikey -available USB or parallel cabling -go to www. nexiq.com for distributor 1-10

  13. Service Link for C2 Connecting 2

  14. Service Link for C2 Connecting 9 pin Deutsch connector -located under dash at left side of steering column 2-2

  15. Service Link for C2 Connecting Online (Connected) -internet connection -computer -data interface device -compatible cables for your Noregon or magic key device and computer -installed ServiceLink software Offline -computer -data interface device -cables as above -installed ServiceLink software 2-3

  16. Service Link for C2 Connecting Online-(Disconnected) -internet connection -computer -installed Slink software 2-4

  17. Service Link for C2 Connecting Status Bar Relationship to host and vehicle 2-5

  18. Service Link for C2 Connecting Before clicking the blue button You should have: 1.voltage - if hydraulic, remove fuse for booster - use battery charger 2. “good” internet connection 3. Schematic for problem circuit 2-6

  19. Service Link for C2 Connecting -Select the DLA vendor -Save settings 2-7

  20. Service Link for C2 Connecting -Turn ignition to “Run/On” -Click the “CONNECT” button Observe lights on J1708 & J1939 lights on DLA 2-8

  21. Service Link for C2 Connecting Slink checks VIN# and Engine s/n -Click “Continue” button 2-8

  22. Service Link for C2 Connecting Status Bar 2-9

  23. Service Link for C2 Connecting If a conflict exists between host data and Vehicle data, Click “Sync ECU list to Host” 2-10

  24. Service Link for C2 Connecting Vehicle info in ”White” 2-11

  25. Service Link for C2 Connecting In Online/Connected Mode; Click “Show Host ECU” -The Vehicle info is displayed in white -The Host info which is current from one interface to the next is Blue -The Factory built settings are Yellow 2-12

  26. Service Link for C2 Connect Online Routinely Updates can take time 2-13

  27. Service Link for C2 Software Organization 3

  28. Service Link for C2 Software Organization Tool/Action Tabs -based on function of a specific module -info and/or tests will be done only on selected module 3-2

  29. Service Link for C2 Software Organization Navigation Bar -allows you to download drivers, offline, set DLA driver, language or help 3-3

  30. Service Link for C2 Software Organization Navigation Bar Admin 3-4

  31. Service Link for C2 Software Organization Side Bar -allows you to focus on one module -only installed/comunicating modules will be displayed 3-5

  32. Service Link for C2 Faults 4

  33. Service Link for C2 Faults MUST BE CONNECTED TO BUS Active -cannot be cleared -updated every 2 seconds -can be reported in both channels 2 reports Only one active problem 4-2

  34. Service Link for C2 Faults Historic/Inactive -all ecus except TCU -can be cleared with Slink 4-3

  35. Service Link for C2 Faults Clearing Historic Faults 4-4

  36. Service Link for C2 Templates 5

  37. Service Link for C2 Templates • Method to electronically control • and/or monitor the bus’s electrical • system. • Function and behavior is based on • The current condition of the circuit • The condition of the consumer • The BHM feature installed • The inputs received • Adequate voltage and ground • Condition of controlling module • Templates allow you to check the devices • in the multiplexing process for a particular • consumer/s. Please do not use a template • for a specific circuit until you understand the • action of the controlling module in the circuit; • Review the circuit schematic first. 5-2

  38. Service Link for C2 Selecting a Template On drawing 103975, if all front dome were inop Then you would select SHM template for plug J3 pin G 5-3

  39. Service Link for C2 Templates Drawing#103996 5-4

  40. Service Link for C2 Selecting a Template On drawing 103996, if left-rear red warning light is inop Then you would select SHM template plug J2 pin K 5-5

  41. Service Link for C2 Templates Drawing#103975 5-6

  42. Service Link for C2 Templates Sidebar at left; click “List” Divided by channel J1708/J1939 5-7

  43. Service Link for C2 Templates Drop down box displays all available templates 5-8

  44. Service Link for C2 Templates Enter Test Mode Your computer assumes control from BHM Once test is complete; exit Test Mode FETs can be overloaded and module damage can occur 5-9

  45. Service Link for C2 Templates Some templates show switch recognition communication, outputs together 5-10

  46. Service Link for C2 Templates Is voltage available to the controlling module/s? 5-11

  47. Service Link for C2 Configuration 6

  48. Service Link for C2 Configuration -Must be connected to host -Organized by ecu and connector number -Only connectors at network modules -if connected to vehicle, differences can be displayed 6-2

  49. Service Link for C2 Configuration Only selected circuits displayed by connector 6-3

  50. Service Link for C2 Configuration Click inside box at Multiplex Function Select circuit by description to narrow search/display 6-4

More Related