1 / 66

ABO Discrepancies & other problems

ABO Discrepancies & other problems. Prepared By Ahmad Shihada Silmi Msc, FIBMS Medical Technology Dept Islamic University of Gaza. Importance. It is important for students to recognize discrepant results and how to (basically) resolve them

aulii
Télécharger la présentation

ABO Discrepancies & other problems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ABO Discrepancies & other problems Prepared By Ahmad Shihada Silmi Msc, FIBMS Medical Technology Dept Islamic University of Gaza

  2. Importance • It is important for students to recognize discrepant results and how to (basically) resolve them • Remember, the ABO system is the most important blood group system in relation to transfusions • Misinterpreting ABO discrepancies could be life threatening to patients

  3. Discrepancies • A discrepancy occurs when the red cell testing does NOT match the serum testing results • In other words, the forward does NOT match the reverse

  4. Why? • Reaction strengths could be weaker than expected • Some reactions may be missing in the reverse or forward typing • Extra reactions may occur

  5. What do you do? • Identify the problem • Most of the time, the problem is technical • Mislabeled tube • Failure to add reagent • Either repeat test on same sample, request a new sample, or wash cells • Other times, there is a real discrepancy due to problems with the patient’s red cells or serum

  6. Discrepancy ? • If a real discrepancy is encountered, the results must be recorded • However, the interpretation is delayed until the discrepancy is RESOLVED

  7. Errors

  8. Technical Errors • Clerical errors • Mislabeled tubes • Patient misidentification • Inaccurate interpretations recorded • Transcription error • Computer entry error • Reagent or equipment problems • Using expired reagents • Using an uncalibrated centrifuge • Contaminated or hemolyzed reagents • Incorrect storage temperatures • Procedural errors • Reagents not added • Manufacturer’s directions not followed • RBC suspensions incorrect concentration • Cell buttons not resuspended before grading agglutination

  9. Clotting deficiencies • Serum that does not clot may be due to: • Low platelet counts • Anticoagulant therapy (Heparin, Aspirin, etc) • Factor deficiencies • Serum that does not clot completely before testing is prone to developing fibrin clots that may mimic agglutination • Thrombin can be added to serum to activate clot formation • OR, tubes containing EDTA can be used

  10. Contaminated samples or reagents • Sample contamination • Microbial growth in tube • Reagent contamination • Bacterial growth causes cloudy or discolored appearance…do not use if you see this! • Reagents contaminated with other reagents (don’t touch side of tube when dispensing) • Saline should be changed regularly

  11. Equipment problems • Routine maintenance should be performed on a regular basis (daily, weekly, etc) • Keep instruments like centrifuges, thermometers, and timers calibrated • Uncalibrated serofuges can cause false results

  12. Hemolysis • Detected in serum after centrifugation (red) • Important if not documented • Can result from: • Complement binding • Anti-A, anti-B, anti-H, and anti-Lea • Bacterial contamination Red supernatant

  13. ABO discrepancies

  14. ABO Discrepancies • Problems with RBCs • Weak-reacting/Missing antigens • Extra antigens • Mixed field reactions • Problems with serum • Weak-reacting/Missing antibodies • Extra antibodies

  15. May cause all + reactions

  16. Forward Grouping Problems

  17. Red Cell Problems • Affect the forward grouping results • Missing or weak antigens • Extra antigens • Mixed field reactions

  18. Forward Grouping:Missing or Weak antigens • ABO Subgroups • Disease (leukemia, Hodgkin’s disease) Group O Group A • Since the forward and reverse don’t match, there must be a discrepancy (in this case, a missing antigen in the forward grouping)

  19. Subgroups of A (or B) • Subgroups of A account for a small portion of the A population (B subgroups rarer) • These subgroups have less antigen sites on the surface of the red blood cell • As a result, they show weakened (or missing) reactions when tested with commercial antisera • Resolution: test with Anti-A1, Anti-H, and anti-A,B for A subgroups

  20. Forward Grouping:Extra Antigens • Acquired B • B(A) phenotype • Rouleaux • Polyagglutination • Wharton’s Jelly EXAMPLE

  21. Acquired B Phenomenon • Cause: there are two causes of acquired B phenomenon: In vivo, patients with bacterial infections and often cancer of the colon or rectum may develop a false B-like antigen. The mechanism: The bacterial produce a deacetylase (enzyme) which chemically alters the terminal sugar of A antigens (N-acetyl-D-galactosamine) into D-galactosamine. • Because the terminal sugar of the B antigen is galactose, anti-B antisera will cross react with the B-like D-galactosamine antigen. Because of this, in vivo, only group A people can develop an acquired B-like antigen. The condition is transient and disappears when the infection is cured.

  22. Acquired B • Bacteria (E. coli) have a deacetylating enzyme that effects the A sugar…. Acquired B Phenotype Group A individual N-acetyl galactosamine Galactosamine now resembles D-galactose (found in Group B) Bacterial enzyme removes acetyl group

  23. Another mechanism • In vitro, blood specimens can get an acquired B-like antigen if they are bacterially contaminated. This is because the membranes of some bacteria (e.g., E. coli and P. vulgaris ) have determinants which are chemically similar to the B antigen. • In this case, anti-B antisera is actually reacting with the bacterial antigens which have attached to the red cells. • In vitro, both group O and group A cells can acquire the B-like antigen. Note: most examples of acquired B phenomenon detected in the blood bank happen in vivo to group A people only.

  24. ES4 Anti-B antisera • The use of monoclonal ABO typing antisera (specifically an anti-B clone designated "ES4") initially caused an increase in acquired B phenomenon. because • The ES4 monoclonals can detect even a small number of galactosamine molecules on red cells. However, the reactions are particularly sensitive to pH and can be reduced (not eliminated totally) if the pH is lowered, something that the manufacturers have done.

  25. Typical reaction pattern • The reactions with anti-B are weaker than expected (e.g., 1+ or 2+). The patient's autocontrol is negative even though anti-B is present (patient is group A). • The patient's own anti-B will not recognize and agglutinate the B-like antigen, but everyone else's anti-B (including the typing sera) will.

  26. Resolution of acquired B • Check the past records in case the patient is a known group A. • Check the diagnosis for bacterial infection (with or without Cancer of the colon or rectum). • Test the red cells with anti-B reagent acidified to pH 6.0 • If using human polyclonal reagents, redo the ABO group using monoclonal anti-A and anti-B typing sera, which may resolve the problem. • If using monoclonal reagents, redo the ABO group using human polyclonal anti-A and anti-B typing sera. • Do autologous control it should give negative result. • Try secretor status studies (usually not necessary). If the patient is group A and a secretor, he will secrete A and H antigens only.

  27. Implication in blood transfusion • Group A people (especially children with a small blood volume) who have acquired B phenomenon should receive group A washed red cells (or group O washed red cells). • The red cells should be washed to remove all traces of donor anti-B which can react with the patient's B-like antigens.

  28. Acquired B Phenotype • Limited mainly to Group A1 individuals with: • Lower GI tract disease • Cancer of colon/rectum • Intestinal obstruction • Gram negative septicemia (i.e. E. coli)

  29. Resolving Acquired B • Check patient diagnosis: Infection? • Some manufacturers produce anti-B reagent that does not react with acquired B • Test patients serum with their own RBCs • The patients own anti-B will not react with the acquired B antigen on their red cell (autologous testing)

  30. B(A) phenotype • Similar to acquired B • Patient is Group B with an apparent extra A antigen • The B gene transfers small amounts of the A sugar to the H antigen • Sometimes certain anti-A reagents will detect these trace amount of A antigen • Resolution: test with another anti-A reagent from another manufacturer

  31. Other reasons for “extra” antigens • Polyagglutination – agglutination of RBCs with human antisera no matter what blood type • Due to bacterial infections • Expression of hidden T antigens react with antisera • Rouleaux – extra serum proteins • Wharton’s Jelly – gelatinous substance derived from connective tissue that is found in cord blood and may cause false agglutination (Remember: only forward typing is performed on cord blood) • Wash red cells or request new sample from heel, etc

  32. Forward Grouping:Mixed Field Agglutination • Results from two different cell populations • Agglutinates are seen with a background of unagglutinated cells • All groups transfused with Group O cells • Bone marrow/stem cell recipients • A3 phenotype

  33. Mixed Field Agglutination

  34. Reverse Grouping Problems

  35. Reverse Grouping • Affect the reverse grouping results • Missing or weak antibodies • Extra antibodies

  36. Reverse Grouping:Missing or Weak antibodies • Newborns • Do not form antibodies until later • Elderly • Weakened antibody activity • Hypogammaglobulinemia • Little or no antibody production (i.e. immunocompromised) • Often shows NO agglutination on reverse groupings

  37. Missing or Weak antibodies #1: Patient is a newborn: Anti-A and anti-B are not present at birth and develop about 3-6 months of age. (Usually the reverse group is not done when grouping newborns.) #2: Patient is very elderly: Anti-A and anti-B levels decrease in old age because levels of immunoglobulins decrease. Because the levels may only be decreased and not totally missing, further investigation can be done. (Note: It would be unusual for an elderly person to totally lack ABO antibodies in the absence of an immune disorder.) #3: Patient has a- or hypogammaglobulinemia: Anti-A and anti-B will be weak or missing in patients with a gammaglobulinemia or hypogammaglobulinemia.

  38. Resolution • Check the age of the patient • Repeat the ABO group at 4°C [anti-A and anti-B react best at 4°C]. • QC required: because all persons have a harmless auto-anti-I reactive at 4°C, include an autocontrol. (Auto-anti-I may agglutinate the A1 cells, the B cells, and the patient's own cells at 4°C.) • Check the diagnosis. • If undiagnosed, have gammaglobulin levels tested

  39. Resolving Weak or Missing antibodies • Determine patients age, diagnosis • Incubate serum testing for 15 minutes (RT) to enhance antibody reactions • If negative, place serum testing at 4°C for 5 minutes with autologous control (a.k.a. Autocontrol, AC) • This is called a “mini-cold” panel and should enhance the reactivity of the antibodies

  40. Reverse Grouping:Extra Antibodies • Cold antibodies (allo- or auto-) • Cold antibodies may include anti-I, H, M, N, P, Lewis • Rouleaux • Anti-A1 in an A2 or A2B individual

  41. Cold antibodies • Sometimes a patient will develop cold-reacting allo- or auto-antibodies that appear as “extra” antibodies on reverse typing • Alloantibodies are made against foreign red cells • Autoantibodies are made against ones own red cells. Cold reacting antibodies cause agglutination with red cells at room temperature and below. The autocontrol will be positive. • Resolution: warming tube to 37° and washing red cells can disperse agglutination; breaking the IgM bonds.

  42. Rouleaux • Can cause both extra antigens and extra antibodies • “stack of coins” appearance • May falsely appear as agglutination due to the increase of serum proteins (globulins) • Stronger at IS and weak reaction at 37°C and no agglutination at AHG phase • Associated with: • Multiple meloma • Waldenstrom’s macroglobulinemia (WM) • Hydroxyethyl starch (HES), dextran, etc

  43. Resolving Rouleaux • Remove proteins! • If the forward grouping is affected, wash cells to remove protein and repeat test • If the reverse grouping is affected, perform saline replacement technique (more common) • Cells (reagent) and serum (patient) centrifuged to allow antigen and antibody to react (if present) • Serum is removed and replaced by an equal volume of saline (saline disperses cells)* • Tube is mixed, centrifuged, and reexamined for agglutination (macro and micro) *some procedures suggest only 2 drops of saline.

  44. Extra Antibodies Anti-A1 in A2 or A2B people: examples #1 and #2 illustrate the presence of anti-A1. The autocontrol (not shown) would be negative. Irregular IgM Alloantibodies: All three examples could represent the presence of irregular IgM alloantibodies such as anti-M, -N, -Lea, -Leb, or -P1. The A1 cells (or B cells) may be agglutinating because they are positive for the corresponding antigen. The autocontrol (not shown) would be negative.

  45. Rouleaux: providing both cells in the reverse grouping show agglutination (examples #1 and #3), the discrepancy could be due to Rouleaux. The autocontrol (not shown) would be positive. Causes: Rouleaux is a type of false agglutination caused by an increase in serum globulins. This can occur in diseases such as multiple myeloma or macroglobulinemia or can be caused by infusion of macromolecular substances such as dextran or polyvinyl pyrollidone (PVP), which are used as blood volume expanders. Autoanti-I: Many people have a harmless autoanti-I that is IgM and reacts best at 4°C. The harmless autoanti-I of most people will not react above 10°-15°C, but some people have an autoanti-I that can react at RT and cause unexpected agglutination in both cells of the reverse serum group (examples #1 and #3).

  46. Anti-A1 • Sometimes A2 (or A2B) individuals will develop an anti-A1 antibody • A2 (or A2B) individuals have less antigen sites than A1 individuals • The antibody is a naturally occurring IgM • Reacts with A1 Cells, but not A2 Cells + A1 cells AGGLUTINATION Anti-A1 from patient + A2 cells NO AGGLUTINATION

  47. Resolving anti-A1 discrepancy • 2 steps: • Typing patient RBCs with Anti-A1 lectin • Repeat reverse grouping with A2 Cells instead of A1 Cells • Both results should yield NO agglutination

  48. Resolution of discrepancies caused by anti-A1 • First step: We must determine if the person is group A1 or group A2. (If group A1, the discrepancy with the A1 cells is NOT due to anti-A1). To do this, we antigen type the person's red cells with the anti-A1 lectin which is Dolichos biflorus . If the red cells agglutinate, the person is group A1. If the red cells do not agglutinate, the person is not group A1, and probably is group A2 assuming the red cells reacted strongly (3+ or 4+ with anti-A).

More Related