1 / 11

Modifying Electrical Impedance Tomography System 2

Paper review(1) purpose. From :R. A. Stiz, P. Bertemes-Filho, A. Ramos, V. C. Vincence. Wide Band Howland Bipolar Current Source using AGC Amplifier IEEE LATIN AMERICA TRANSACTIONS, VOL. 7, NO. 5, SEPTEMBER 2009 Purpose Optimizing the output impedance (Zout) and voltage controlled

bernad
Télécharger la présentation

Modifying Electrical Impedance Tomography System 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Modifying Electrical Impedance Tomography System (2) Presenter : Yu-Chun Hua Adviser : Dr. Ji-Jer Huang Date : 99.12.09

    2. Paper review(1) purpose From :R. A. Stiz, P. Bertemes-Filho, A. Ramos, V. C. Vincence. Wide Band Howland Bipolar Current Source using AGC Amplifier IEEE LATIN AMERICA TRANSACTIONS, VOL. 7, NO. 5, SEPTEMBER 2009 Purpose Optimizing the output impedance (Zout) and voltage controlled current source (VCCS) In this system, it uses a current source balanced (also called "bipolar) Automatic gain control(AGC) : ?????????

    3. Paper review(1) materials and methods Howland Circuit

    4. Paper review(1) materials and methods

    5. Paper review(1) results

    6. Paper review(2) purpose From: Tushar Kanti Bera and J. Nagaraju ? A Simple Instrumentation Calibration Technique for Electrical Impedance Tomography (EIT) Using A 16-Electrode Phantom 5th Annual IEEE Conference on Automation Science and Engineering Bangalore, India, August 22-25, 2009 Purpose Intended to investigate the phantom responses for different electrode geometry Electrode array position in bathing solution column and the instrumentation is calibrated accordingly

    7. Paper review(2) materials and methods Instrumentation(VCO) EIT-Phantom Forward Solution with Forward Solver Boundary Potentials Measurements

    8. B. EIT-Phantom

    9. C. Forward Solution with Forward Solver Forward Problem (FP) is the basis of EIT and it is essentially to be solved to calculate the boundary potential for estimating the conductivity update (?s) for each iteration in Inverse Problem (IP) . Studying the FP, for an EIT system, the instrumentation error can be detected to eliminate the noise in the voltage signal for better image resolution .

    10. Equation

    11. Equation

More Related