1 / 23

Business Enabled Communications

Administration. Business Enabled Communications. Contents. Starting Web Service User’s Guide Station Program Admin & Maintenance ID & Password Web Access Authorization Admin Categories Overview Menu New Window Related PGM Link. Numbering Plan Type System Numbering Plan

bowie
Télécharger la présentation

Business Enabled Communications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Administration Business Enabled Communications

  2. Contents • Starting Web Service • User’s Guide • Station Program • Admin & Maintenance • ID & Password • Web Access Authorization • Admin Categories • Overview Menu • New Window • Related PGM Link • Numbering Plan Type • System Numbering Plan • Flexible Station Number • CO Group Access Code • Feature Code Numbering • Station Group Number • Networking Numbering

  3. WEB Admin Starting Web Service • Install iPECS-MG system • Default MPB IP address : 10.10.10.1 • Or, configure MPB IP using RS-232 port. • Connect to the system IP on web browser. • iPECS-MG web service homepage provides ; • User’s Guide • Station Program • Admin & Maintenance

  4. WEB Admin User’s Guide • Click ‘User’s Guide’ to refer tobrief user’s guide. • User’s guide provides; • Program Codes (Overview) • Numbering Plan (Overview) • User Name Registration • Station Speed Dial • System Speed Dial • Dial by Name • Intercom Signaling Mode • Station Flexible buttons • Call Forward • Transfer • Authorization Codes • DND • Call Pick-up • Paging • How to access CO/IP line?

  5. WEB Admin Station Program • Click ‘Station Program’ menu and enter desired station number and password. • Password is mandatory for station program. • Station Program provides ; • Station Port Attributes • Station DN Attributes • Call Forward • Pre-Selected Message • Station Speed Dial • Station Flexible buttons • Station ICLID • Mobile Extension Attributes • Send Internal SMS • ACD Group Management • ACD Group Call Traffic • User Guide

  6. WEB Admin Admin & Maintenance • Click ‘Admin & Maintenance’ menu to start Admin. • Enter User ID and Password for web admin and click ‘Login’ button. • Web Admin Categories are displayed according to the user level.

  7. WEB Admin ID & Password • Admin ID & Password at System Data • System Data > System Password (226) • Basic Password tab : ID & Password of User, Admin. and Maint. • Additional Password tab : ID & Password of User2, User3, Admin2 and Admin3.

  8. WEB Admin Web Access Authorization • User Access level control at System Data • Click System Data > Web Access Authorization • Accessibility of 3 Users & 3 Administers about every Admin fields. • Maint. ID has no restriction.

  9. Admin Categories Admin Categories • Pre-programmed data • Numbering Plan • Station Port Data • Station Number Data • CO Line Data • Station Group Data • System Data • Table Data • Tenant Data • Board Data • Voice Network • T-Net Data • H.323 Data • SIP CO Data (web only) • SIP Station Data (web only) • Zone Data (web only) • SNMP Data (web only) • DECT Data • Green Mode (web only) • Initialization

  10. Admin Categories

  11. Admin Categories

  12. Admin Categories

  13. Overview Menu • ‘ Overview’ menus in STA, Station Group or CO PGM categories.

  14. New Windows • Click [N] to open new window.

  15. Related PGM Link • Some PGM has link menu for other PGM

  16. Numbering Plan Numbering Plan Type (ADM 110) • 6 Types of Numbering Plan default values set can be selected.

  17. Numbering Plan System Numbering Plan (ADM 111) • Maximum 8 digit numbering is possible. • Every Numbering Plan codes should be matched with System Numbering Plan. - Prefix Code : preceding digits in common - More digits : number of following digits after prefix code - Master Prefix digits : upper 4 digits among prefix code ; XXXXXXXX (Max 3 in iPECS-MG 100, 5 in iPECS-MG 300)  2XXX • If deleted, all of the related numbering plan codes are deleted! 0 *4 *5XX *6XX *7 *8XX #8XX #9 #*XX 1XXX

  18. Numbering Plan Examples • Make Station Number 1000 ~ 1499 • Required Numbering Plan : 1XXX - Prefix Code : 1, More digits : 3 • - Master prefix digits : None • => Assign Station Numbers at ADM 112. • Make Station Number 4501000~ 4504899 - Required Numbering Plan : 450XXXX - Prefix Code : 450, More digits : 4 - Master prefix digits : 450 => Assign Station Numbers at ADM 112. • Make Feature Codes 801~ 872 and 8# • - Required Numbering Plan : 80X~ 87X, 8# • Prefix Code : 80 ~ 87, More digits : 1 • Prefix Code : 8# , More digits : 0 • - Master prefix digits : None • => Assign Feature Codes at ADM 113.

  19. Numbering Plan Flexible Station Number (ADM 112) • Change Station Number • using order range • Check and edit Station Number one by one • Change Station Number • using station range  To Assign new numbering, proper System Numbering Plan should exist!! • Station Number search

  20. Numbering Plan Feature Code Numbering (ADM 113) • Select [Feature Numbering] tab at Feature Numbering Plan menu • Check or edit Feature Code one by one  To Assign new numbering, proper System Numbering Plan should exist!!

  21. Numbering Plan CO Group Access Code (ADM 114) • Select [CO Group Access Code] tab at Feature Numbering menu. • Check or edit CO Group Access Code one by one  To Assign new numbering, proper System Numbering Plan should exist!! • Assign CO Group Access Code • using order range • Delete all CO Grp Access Code • using order range

  22. Numbering Plan Station Group Number (ADM 115) • Select [Station Group Number] tab at Feature Numbering menu. • Check or edit Feature Code one by one  To Assign new numbering, proper System Numbering Plan should exist!! • Assign Station Group Number • by using order range • Delete all Station Group Number • by using range

  23. Numbering Plan Networking Numbering (ADM 112) • Open ADM 321 at Voice Network Data. • Enter index number to edit and load data.  To Assign new numbering, proper System Numbering Plan should exist!! • Check ADM 111 and all the other numbering plan to assign or remove • Net Numbering.

More Related