1 / 40

Northeast Generation .2 Training

Northeast Generation .2 Training. Selection, Pricing and Specification. ….. therefore selection and pricing is also ‘modular’…like a car. Selection & Pricing – The key is AUMA’s modular design…. AC.2. SA.2. GS.3. SA07.1-48.1 Price List AM (AUMA Matic ) Price List

davida
Télécharger la présentation

Northeast Generation .2 Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Northeast Generation .2 Training Selection, Pricing and Specification

  2. …..therefore selection and pricing is also ‘modular’…like a car. Selection & Pricing – The key is AUMA’s modular design…. AC.2 SA.2 GS.3

  3. SA07.1-48.1 Price List AM (AUMA Matic) Price List AMTP (AUMATIC) Play Price List AC.1 / conventional I/O Price List AC.1 / fieldbus Price List Disconnect Switches Local Controls Wall brackets SAExC 07.1 - 16.1 (FM) Price List SAEx 25.1 – 30.1 (FM) Price List AMEx (FM) AUMA Matic Price List AMEx (FM) Triple Play Matic Price List ACExC.1 (FM) conventional I/O Price List ACExC.1 (FM) fieldbus Price List SA07.2-16.2 Price List AC.2 Conventional Price List AC.2 Fieldbus Price List SA.2/GS Quarter turn Selection Charts & Price Lists SA.2/GK Multi turn Selection Charts & Price Lists SA/GS Selection Charts & Price Lists SA/GK Selection Charts & Price Lists SG05.1-SG12.1 Price List SGExC05.1 – 12.1 (FM) Price List SG.3 Price List SGExC.1 Price List SAExC/GS Selection Charts & Price Lists SAExC/GK Selection Charts & Price Lists GS & GF Worm Gearboxes GK Bevel Gearboxes Stem Protection Tubes Handwheels & Chainwheels AUMA Express AUMA Standard Product CSA Price List Published Price Lists – in Salespersons Catalog & on website...

  4. Actuator Selection LINEAR ROTARY ¼-TURN

  5. Information required to select and price an actuator Type & size of valve? Torque requirement? Valve stem diameter? Type of service (open/close, modulating)? Motor power (voltage/phase/frequency)? Closing time? Enclosure – watertight, submersible, hazardous location (NEMA 4, 4X, 6, 7) Non-intrusive?

  6. Information required to select and price an actuator (continued) Ambient temperature Actuator accessories • limit switches (2 GTLS, 2 GTLS-12, 4 GTLS) • position feedback device (potentiometer, transmitter, MWG) • mechanical devices (MDPI, stem protection tube, declutch lever lock) Motor controls • integral or remote? • who is furnishing controls? • what controls are required?

  7. Quarterturn Selection • Information required • Manual selection • Electric selection Multiturn Selection • Information required • Electric selection

  8. Quarter-turn Sizing Valve torque and stem diameter must be obtained from the valve manufacturer. Valve torque and stem diameter must be measured in the field for retro-fit applications.

  9. Quarterturn - Manual Operator Selection Selection and Pricing Tools: • GS Technical Data Sheet • GS50.3 – 250.3 • GS315 – 500 • GS630.3 • AWWA Rating Selection Chart • When to use Bronze Select worm gearbox (with primary gear reducer) based on valve requirements.

  10. Electric Actuator Selection Quarter-turn Electric Applications • NEWcombination selection chart and price list: • NEW chart includes: • Application Guide • Product Descriptions • Selection Charts for SG.1 – 1-phase and 3-phase • Price list for SG.1 • Selection Charts for SA.2/GS and SAR.2/GS • Price lists for SA.2/GS and SAR.2/GS

  11. REQUIREMENTS 6” butterfly valve 125 ft lbs. break torque 1” diameter stem 120 volt / 1ph / 60hz 15 second operation motor controls to be furnished by others Actuator selection example Quarterturn Selection and Pricing Chart

  12. REQUIREMENTS 6” butterfly valve 125 ft lbs. break torque 1” diameter stem 120 volt / 1ph / 60hz 15 second operation motor controls to be furnished by others SELECTION SG07.1 “NORM” PRICING SG07.1 Norm, 1-phase: $1,985 (ref page 4 of MA-GE-11-0006) Actuator selection example

  13. REQUIREMENTS 24” butterfly valve 1875 ft lbs. torque 2.75” diameter stem 120 volt / 1ph / 60hz 60 second operation local ‘OSC’ & ‘LOR’ control Ductile Iron Worm Wheel Acceptable Actuator selection example Quarterturn Selection and Pricing Chart

  14. REQUIREMENTS 24” butterfly valve 1875 ft lbs. torque 2.75” diameter stem 120 volt / 1ph / 60hz 60 second operation local ‘OSC’ & ‘LOR’ control Ductile Iron Worm Wheel Acceptable SELECTION SA07.6-54B/ GS100.3/VZ4.3 AM with reversing starters, ‘open-stop-close’ pushbuttons, ‘open-fault-close’ lights & ‘local-off-remote’ selector switch PRICING SA07.6-54B/ GS100.3/VZ4.3 $3,470 (ref page 8 of MA-GE-11-0006) AM $1,155 (ref page 15 of MA-GE-11-0006) TOTAL $4,625 Actuator selection example

  15. Actuator Selection and Pricing - Multi-turn

  16. Multi-turn Selection and Pricing Valve torque and/or thrust must be obtained from the valve manufacturer. The valve stem diameter with pitch & lead or number of turns are, also, required. Valve torque, thrust, stem diameter & threads must be measured in the field for retro-fit applications.

  17. Multi-turn Selection and Pricing Multi-turn Applications • SA.2 Technical Data - Multi-turn Actuators - Open/Close Service (Three phase & single phase) • SAR.2 Technical Data - Multi-turn Actuators - Modulating Service (Three phase & single phase) • SA.2/GK – SAR.2/GK Combinations for Multi-turn Actuators Selection Charts & Price List Multiturn Selection and Pricing Chart SA.2-three phase Selection SAR.2-three phase Selection SAR.2-single phase Selection SA.2-single phase Selection

  18. Multi-turn Selection and Pricing Standard multiturn valve operating speeds: • 12 inches per minute standard for gate valves • 4 inches per minute standard for globe valves Required multiturn actuator operating speeds (SA actuator RPM): • SA actuator RPM = Number of stem turns per inch X required stem speed • Example: 4 turns per inch of travel X 12 inches per minute = 48 rpm The actuator output usually doesn’t exactly match the required speed, so we have to calculate the actual stem speed and inform the customer • Example: 48 rpm is between SA speeds 38 and 54, so we will select 54 rpm • Actual stem speed = 54 rpm ÷ 4 turns per inch = 13.5 inches per minute

  19. REQUIREMENTS 8” gate valve open/close service 5000 lbs. thrust 40 ft lbs. torque 1.25” diameter stem 4 threads per inch single lead 460 volt / 3 ph / 60 hz 12 inches per minute (IPM) No Motor Controls Required. Multi-turn Actuator selection example Multiturn Selection Chart

  20. REQUIREMENTS 8” gate valve open/close service 5000 lbs. thrust 40 ft lbs. torque 1.25” diameter stem 4 threads per inch single lead 460 volt / 3 ph / 60 hz 12 inches per minute (IPM) No Motor Controls Required. SELECTION Previous Selection: SA10.1-54A NEW Selection: SA07.6-54A Optimal speed 12 in/min x 4 turns/inch = 48 rpm The closest ‘SA’ output speed is 54 RPM 54 RPM/ 4 turns per inch = 13.5 IPM stem speed ‘A’ output drive required to accept thrust Multi-turn Actuator selection example

  21. REQUIREMENTS 8” gate valve open/close service 5000 lbs. thrust 40 ft lbs. torque 1.25” diameter stem 4 threads per inch single lead 460 volt / 3 ph / 60 hz 12 inches per minute (IPM) No Motor Controls Required. PRICING: Previous: SA10.1-54 $2,010 A-Drive $ 190 TOTAL: $2,200 (ref MA-GE-01-0001 pages 2 & 7) NEW: SA07.6-54A $1,890 TOTAL: $1,890 (ref MA-GE-01-0006 pages 2 & 5 or MA-GE-14-0002 page 5) TOTAL SAVINGS OF $310! Multi-turn Actuator selection example

  22. Multi-turn Actuator Pricing SA.1 vs SA.2 SA.1 Pricing = SA.2 Pricing!!!

  23. Actuator Selection and Pricing – AC.2 Controls

  24. Actuator Selection and Pricing – AC.2 Controls • Review: • Two Versions: • Global • Ref Page 1 of MA-GE-35-0014 • US • 115V control • 30 mA - 115 VAC for control inputs • 5 ea 5A contacts wo/ common • North American indicating lights

  25. AC.2 Pricing • Prices – AC 01.2 Golbal Version & US Version • AC01.2 Pricing The ‘special price’ for the AC 01.2 (US Version) is $176 less expensive than the sum of the base price and the 4 options.

  26. AC.2 Pricing • Compare price - SA07.1-SA16.1 + AC01.1 to SA07.2-SA16.2 + AC01.2 (Global Version) • When we use the AC 01.2 (Global Version) – The Generation.2 product is less expensive!! • Plus we have these valuable additional features (over the AC 01.1)….. • IP68-8 • Bluetooth interface for AC configuration and software upgrades

  27. AC.2 Pricing • Compare price - SA07.1-SA16.1 + AC01.1 to SA07.2-SA16.2 + AC01.2 (US Version) • When we use the AC 01.2 (US Version) – The Generation.2 product is slightly more expensive!! • But we have these valuable additional features (over the AC 01.1)….. • IP68-8 • Bluetooth interface for AC configuration and software upgrades • 115 VAC control • 30 mA 115 VAC for control inputs • 5 ea change-over contacts without common rated 5 A • North American indicating light version

  28. AC.2 Pricing • Compare price - SA07.1-SA16.1 + AC01.1 to SA07.2-SA16.2 + AC01.2 (US Version) • When we use the AC 01.2 (Global Version plus the change-over contact and NA indicating light options) – The Generation.2 product is slightly more expensive!! • But we have these valuable additional features (over the AC 01.1)….. • IP68-8 • Bluetooth interface for AC configuration and software upgrades • 5 ea change-over contacts without common rated 5 A • North American indicating light version

  29. Pricing 2013 • No price increase in general for 2013 except: • SA.1 prices will increase mid 2013 • AC.1 prices will increase mid 2013 • Reminder: • SA.1 pricing currently equals SA.2 pricing • AC.2 pricing in some configurations is lower than AC.1 pricing

  30. Other AUMA Shipment Programs

  31. AUMA Express Program Standard quarterturn actuators for AUMA sales organization & OEMs Cannot deviate from standard description 2 week ship time Prices shown are list prices 31

  32. AUMA AUMA Express SG Express SG Express Lite SG positioner Express SGPD Express SGPD Express Lite Models available: SG07.1, SG10.1 & SG12.1 Only SA/GS Express & SAR/GS Express Models as shown Shipment: 2 Weeks After Receipt of the Order 32

  33. AUMA Standard Product Standard multi turn actuators also quarter turn actuators with available worm gearboxes Cannot deviate from standard description 4 week ship time Prices determined from published price list 33

  34. AUMA Standard Product Available models: SA and SAR / NORM or AM NEMA 4X/6 (6 ft for 30 minutes) CSA 4 SAExC and SARExC / NORM or AMEx FM - Division system CSA – Division System Features: • 460, 480, 575 or 600 VAC / 3 phase / 60 hz (see ‘Specific models & configurations available' below) • 15 minute duty motor with class F insulation • KN corrosion protection • Control configurations: • NORM • AM with 115 V interface board and 115 volt control • AM with analog positioner and 24 volt control • Output drive / gearbox configurations • Output drive B3 (unmachined – unless furnished with AUMA GS worm gearbox) • Output drive A (unmachined) • GS worm gearboxes and primary gear reducers for quarter turn service as indicated Standard Product Program 34

  35. Shipping schedule SA07.1-SA16.1 SA07.2-SA16.2 SAR07.1-SAR16.1 SAR07.2-SAR07.6 SG05.1-SG12.1 460/3/60 voltage or 120/1/60 voltage “NORM” or AM controls GS50.3-GS250.3 GS315 SAExC10.1 & SAExC14.5 (19 to 216 RPM) 6-8 weeks shipment SA or SG.1 with AC 14 weeks shipment (check factory) SAExC07.1, SAExC07.5, SAExC14.1, SAExC16.1 18 weeks shipment SA25.1 &SA30.1 16 weeks shipment SA35.1, SA40.1 & SA48.1 24 weeks shipment Non-Standard Motor Voltages 12-18 weeks shipment GS400 & GS500 Worm gearboxes 22 weeks shipment GK10.2 – GK30.2 Bevel gearboxes 8 weeks shipment GK35.2 – GK40.2 Bevel gearboxes 14 weeks shipment Shipping Schedule Issue 1.12 35

  36. Generation .2 Specification

  37. SQ05.2 – 14.2 Identical operation concept to multi-turn actuators of generation .2 • Torque output: 35 – 1770 ft-lbs (50 – 2400 Nm) • Operation Time: 4 – 100 sec • Open – Close / Modulating • Estimated Time Table: • 1st Batch • 3-ph Order Entry – April 2013 • 3-ph Delivery – June 2013 • 2nd Batch • 3-ph Ex – Late 2013 • 3 Batch • 1-ph – Late 2013 • 1 Ph Ex and DC – Unknown

  38. SQ05.2 – 14.2

  39. SQ05.2 – 14.2 Next Steps for AUMA-USA • Develop SQ Task Force • Acquire Demo Units • Learn details of product: • AWWA Approved? • Operating Times Available? • Develop Pricing Structure • Develop USA Schedule • Etc.

  40. Actuator Selection and Pricing Questions?

More Related