1 / 8

RPC detection rate capability ≈ 1/ρ Float-Glass (10 12-13 Ω-cm) RPC rate capability

High-Rate GRPC. RPC detection rate capability ≈ 1/ρ Float-Glass (10 12-13 Ω-cm) RPC rate capability < Bakelite(10 10-11 Ω-cm) one. New kind of doped glass was developed by Tsinghua University. It allows to reach much higher rate capabilities. Glass Specifications:

dea
Télécharger la présentation

RPC detection rate capability ≈ 1/ρ Float-Glass (10 12-13 Ω-cm) RPC rate capability

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. High-Rate GRPC • RPC detection rate capability ≈ 1/ρ • Float-Glass (1012-13 Ω-cm) RPC rate capability • < Bakelite(1010-11 Ω-cm) one. • New kind of doped glass was developed • by Tsinghua University. It allows to reach much • higher rate capabilities. Glass Specifications: Present max. dimension: 32cm×30cm Bulk resistivity: ≈1010.cm Standard thickness: 0.5mm--2mm Thickness uniformity: 0.02mm Dielectric constant: ≈9 Surface roughness: <10nm DC measurement: very stable Scanned image of glass

  2. High-Rate GRPC Current (μA) Bulk resistivity (1010 Ω.cm) Bulk resistivity (Ω.cm) Current (μA) Bulk resistivity (1010 Ω.cm) • Resistivity decreases with temperature • Resistivity is very stable in DC measurement The glass was applied with 1000V for about 32days, integrated charge: 1 C/cm2 mA humidity 2 A small LR-GRPC was exposed with the CMS, ATLAS RPC to the GIF source for more than one year

  3. Single gap Readout pads (1cm x 1cm) Mylar layer (50μ) PCB interconnect Readout ASIC (Hardroc2, 1.6mm) PCB (1.2mm)+ASICs(1.7 mm) PCB support (polycarbonate) Gas gap(1.5mm) Cathode glass (1.1mm) + resistive coating Mylar (175μ) Ceramic ball spacer Anode glass (0.7mm) + resistive coating Glass fiber frame (≈1.2mm) Total thickness: 6.0mm 30X30 cm2

  4. 4.7 mm 4.3mm Electronics readout system R&D Assembling procedure ASICs : HARDROC2 64 channels Trigger less mode Memory depth : 127 events 3 thresholds Range: 10 fC-15 pC Gain correctionuniformity Printed Circuit Boards (PCB) with 8-layer structure and buried vias are used DAQ board (DIF) was developed to transmit fast commands and data to/from ASICs. 6mm(active area) + 5mm(steel) = 11 mm thickness

  5. Bean test setup Beam counter Scint-PM GRPC running conditions : Gas flow : 2 l/h Gas mixture: 93% R134A, 5% CO2, 2% SF6 2 Scint-PM DESY electronbeam 1 float GRPC+ 4 S-C GRPC Measurements : Efficiency of one chamber is estimated using tracks built from clusters of at least 3 other RPCs. Only one cluster per RPC is allowed for this study Multiplicity : Number of pads associated Tto the track in the given chamber x x ? x x

  6. Semi-Conductive GRPC performance Threshold@130fC Rate : few Hz/cm2

  7. Semi-Conductive GRPC performance at high rate

  8. Time resolution measurement: Single-gap RPC can achieve time resolution better than 1 ns. Much better time resolution can be obtained using multi-gap RPC Semi-conductive multi-gap GRPC can achieve both high rate capability and high time precision measurement.

More Related