1 / 36

Technical Drawing – Week 3

Technical Drawing – Week 3. 2008-Fall. Modifying Objects. Command Promt Modify Menu. Modify Toolbox. The Erase Command. Refer week 1. The Copy Command. Keyboard COPY, short-cut CP Command Sequence Command: COPY Select objects: (pick object to copy, P1)

decker
Télécharger la présentation

Technical Drawing – Week 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Technical Drawing – Week 3 2008-Fall

  2. Modifying Objects • Command Promt • Modify Menu • Modify Toolbox

  3. The Erase Command • Refer week 1

  4. The Copy Command • Keyboard COPY, short-cut CP • Command Sequence • Command: COPY • Select objects: (pick object to copy, P1) • Select objects: (to end selection) • Specify base point or displacement, or [Multiple]: (pick P2 or M for multiple copies) • Specify second point of displacement or <use first point as displacement>: (pick P3)

  5. Selecting Objects • Mouse click (when the cursor is □) • Window selection and Crossing selection • Type “ALL” for selecting all objects • Type “F” for fence selection • Type “WP” for window polygon selection • Type “CP” for crossing polygon selection

  6. Selecting Objects • Fence selection • Type “WP” for window polygon selection • Type “CP” for crossing polygon selection

  7. Object Snapping

  8. Object Snapping

  9. Using the From Object Snap • Keyboard FRO or FROM (when picking) • The From Osnap can be used in conjunction with other osnaps or ordinary pick points and relative co-ordinates to pick offset points. • The From Osnap does not snap to object snap locations, rather it can be used to snap to points at some distance or offset from an object snap location. Follow the command sequence below to discover how this is done. • To draw the Line • Command: LINE • Specify first point: (pick a point in the lower half of the drawing area) • Specify next point or [Undo]: @0,30 (a relative co-ordinate, 30 units above the first point) • Specify next point or [Undo]: (to end) • Command: CIRCLE • Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: FROM • Base point: END • of <Offset>: @0,10 (this co-ordinate is a point 10 units above the endpoint) • Specify radius of circle or [Diameter] <10.0000>: 10 (a radius value of 10 ensures that the southern point on the circle will touch the top of the line)

  10. Using the From Object Snap • Your shape is…

  11. Running Object Snaps • Pull-down ToolsDrafting Settings… • Keyboard DDOSNAP

  12. Exercise • To Draw the Triangle • Command: LINE • Specify first point: (pick a point in the middle of the drawing area) • Specify next point or [Undo]: @15,0 • Specify next point or [Undo]: FROM • Base point: MID • of (pick a point near the middle of the line) • <Offset>: @0,75 • Specify next point or [Undo]: C (to close) • To Draw the Vertical Line • Command: LINE • Specify first point: MID • of (pick point near the middle of the triangle base) • Specify next point or [Undo]: @0,-100 • Specify next point or [Undo]: • To Draw the Horizontal Line • Command: LINE • Specify first point: FROM • Base point: MID • of (pick a point near the middle of the vertical line) • <Offset>: @-25,0 • Specify next point or [Undo]: @50,0 • Specify next point or [Undo]:

  13. Exercise • To Draw the Circle • Command: CIRCLE • Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: INT • of (pick a point near the intersection of the two lines) • Specify radius of circle or [Diameter]: 12.5 • To Trim the Lines within the Circle • Command: TRIM • Current settings: Projection=UCS Edge=None • Select cutting edges ... • Select objects: (pick the circle on its circumference) • Select objects: • Select object to trim or [Project/Edge/Undo]: (pick one of the lines within the circle) • Select object to trim or [Project/Edge/Undo]: (pick the other line within the circle) • Select object to trim or [Project/Edge/Undo]:

  14. Exercise • To Draw the Text • Command: DTEXT • Current text style: "Standard" Text height: 2.5000 • Specify start point of text or [Justify/Style]: J • Enter an option [Align/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BR]: M • Specify middle point of text: CEN • of (pick a point on the circumference of the circle) • Specify height <2.5000>: 15 • Specify rotation angle of text <0>: 0 • Enter text: N • Enter text: • Command:

  15. The Mirror Comand • Keyboard MIRROR, short-cut MI • The Mirror command allows you to mirror selected objects in your drawing by picking them and then defining the position of an imaginary mirror line using two points. • Command Sequence • Command: MIRROR • Select objects: (pick object to mirror, P1) • Select objects: (to end selection) • Specify first point of mirror line: (pick P2) • Specify second point of mirror line: (pick P3) • Delete source objects? [Yes/No] <N>: (for No to keep the original object)

  16. The Offset Command • Keyboard OFFSET short-cut O • The Offset command creates a new object parallel to or concentric with a selected object. The new object is drawn at a user defined distance (the offset) from the original and in a direction chosen by the user with a pick point. You can offset lines, arcs, circles, ellipses, 2D polylines, xlines, rays and planar splines. • Command Sequence • Command: OFFSET • Specify offset distance or [Through] <1.0000>: 10 (specify distance) • Select object to offset or <exit>: (select object, P1) • Specify point on side to offset: (pick direction, P2) • Select object to offset or <exit>: (to end or select another object to offset)

  17. The Array Command • First draw a rectangle 20*10 • Keyboard ARRAY short-cut AR • Rectangular array

  18. The Array Command • Rectangular array • Click the Select objects button. The dialogue box will temporarily disappear enabling you to select the rectangle you just drew. Press the Return button on your keyboard to complete the selection. You are now returned to the dialogue box and the message immediately below the Select Objects button should read "1 objects selected". • Enter the number of rows required in the Rows edit box. For this example, enter the value "3". Notice that the schematic preview on the right hand side of the dialogue box updates to reflect the values you are entering. • Enter the number of columns required in the Columns edit box. Enter the value "2". • Enter the row offset in the Row Offset edit box. This is the distance DR in the illustration above. Note that tis is not the distance between rows. In this example, our rectangle is 10 units high and we will enter a row offset of 15. The result will be a 5 unit gap between rectangles. • Enter the column offset in the Column Offset edit box. The same parameters apply as for the row offset. Enter a value of 25 to give a 5 unit gap between our rectangles. • Click on the Preview button. Once again, the dialogue box disappears and the specified array is temporarily drawn so that we can preview it. We are now offered 3 choices. If the array isn't quite right, click the Modify button to return to the Array dialogue box. If you are happy with the array, click the Accept button, the array will be permanently drawn and the command is ended.

  19. The Array Command • Polar array

  20. The Array Command • Polar array • Click the Select objects button. The dialogue box will temporarily disappear enabling you to select the rectangle you just drew. Press the Return button on your keyboard to complete the selection. You are now returned to the dialogue box and the message immediately below the Select Objects button should read "1 objects selected". • Specify the center point for the array. This is the point C in the illustration below. You can do this by entering x and y co-ordinates into the appropriate edit boxes if you know what these values should be. However, this is rarely the case and most often you will want to click the Pick Center Point button to pick a point from the drawing area. Pick a point somewhere below the rectangle you have just drawn. • Enter a value for the total number of items. For this example, enter the value "6". Notice that once again, the schematic preview updates to reflect the values you have entered. • Make sure that the Rotate items as copied checkbox is checked. • Click on the Preview button. Once again, the dialogue box disappears and the specified array is temporarily drawn so that we can preview it. We are now offered 3 choices. If the array isn't quite right, click the Modify button to return to the Array dialogue box. If you are happy with the array, click the Accept button, the array will be permanently drawn and the command is ended

  21. The Move Command • Keyboard MOVE short-cut M • Command: MOVE • Select objects: (pick object to move, P1) • Select objects: (to end selection) • Specify base point or displacement: (pick P2) • Specify second point of displacement or <use first point as displacement>: (pick P3) • Note that as with the Copy command, the two pick points, P2 and P3 are used only to indicate the distance and direction of movement

  22. The Rotate Command • Keyboard ROTATE short-cut RO • Command Sequence • Command: ROTATE • Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 • Select objects: (pick object to rotate, P1) • Select objects: (to end selection) • Specify base point: (pick base point, P2) • Specify rotation angle or [Reference]: (pick second point, P3 or enter angle)

  23. The Scale Command • Keyboard SCALE short-cut SC • Command Sequence • Command: SCALE • Select objects: (pick objects to be scaled, P1) • Select objects: (to end selection) • Specify base point: (pick base point, P2) • Specify scale factor or [Reference]: (pick second point, P3 or enter scale factor)

  24. The Stretch Command • Keyboard STRETCH short-cut S • The Stretch command can be used to move one or more vertices of an object whilst leaving the rest of the object unchanged. In the example below, a rectangle has been stretched by moving one vertex to create an irregular shape. • Command Sequence • Command: STRETCH • Select objects to stretch by crossing-window or crossing-polygon... • Select objects: (pick first point of crossing window) • Specify opposite corner: (pick second point of window) • Select objects: (to end selection) • Specify base point or displacement: (pick base point) • Specify second point of displacement: (pick second point)

  25. The Lengthen Command • Keyboard LENGTHEN short-cut LEN • The Lengthen command can often be used instead of either the Trim or Extend commands. Indeed the end result is exactly the same. The Lengthen command can be used to either lengthen or shorten Lines, Arcs, open Polylines, elliptical Arcs and open Splines without the use of cutting or boundary edges. • Command Sequence • Command: LENGTHEN • Select an object or [DElta/Percent/Total/DYnamic]: DY • Select an object to change or [Undo]: (select a line or arc) • Specify new end point: (pick new end point) • Select an object to change or [Undo]: (to end) • Delta = 10 means add 10 units to the original length • Percent = 10 means decrease to 10% of the original length • Total = 10 means final length will be 10 units • Dynamic refers to dynamic elongation

  26. The Trim Command • Keyboard TRIM short-cut TR • First select the cutting edges, than the objects to be cut. • Command Sequence • Command: TRIM • Current settings: Projection=UCS Edge=None • Select cutting edges ... • Select objects: (select the cutting edge, P1) • Select objects: (to end cutting edge selection) • Select object to trim or shift-select to extend or [Project/Edge/Undo]:(pick the part of the square which you want to trim, P2) • Select object to trim or shift-select to extend or [Project/Edge/Undo]: (pick the circle, P3) • Select object to trim or shift-select to extend or [Project/Edge/Undo]: (to end)

  27. The Extend Command • Keyboard EXTEND short-cut EX • First select the boundary edge, than the objects to be extended. • Command Sequence • Command: EXTEND • Current settings: Projection=UCS Edge=None • Select boundary edges ... • Select objects: (select the boundary edge, P1) • Select objects: (to end boundary edge selection) • Select object to extend or shift-select to trim or [Project/Edge/Undo]: (pick the object which you want to be extended, P2) • Select object to extend or shift-select to trim or [Project/Edge/Undo]: (pick another object which you want to be extended, P3) • Select object to extend or shift-select to trim or [Project/Edge/Undo]: (to end)

  28. The Extend Command • Using the Edgemode • Command: EXTEND • Select boundary edges: (Projmode = UCS, Edgemode = No extend) • Select objects: (select the boundary edge, P1) • Select objects: (to end boundary edge selection) • Select object to extend or shift-select to trim or [Project/Edge/Undo]: E (to use the Edge option) • Enter an implied edge extension mode [Extend/No extend] <No extend>: E (to set Edgemode to Extend) • Select object to extend or shift-select to trim or [Project/Edge/Undo]: (pick the object to be extended, P2) • Select object to extend or shift-select to trim or [Project/Edge/Undo]: (to end)

  29. The Break Command • Keyboard BREAK short-cut BR • The Break command enables you to break (remove part of) an object by defining two break points. • Command Sequence • Command: BREAK • Select objects: (select the object using the first break point, P1) • Specify second break point or [First point]: (pick the second break point, P2) • The section of the object is removed and the command ends.

  30. The Chamfer Command • Keyboard CHAMFER • The Chamfer command enables you to create a chamfer between any two non-parallel lines as in the illustration below or any two adjacent polyline segments. • Command Sequence • Command: CHAMFER • (TRIM mode) Current chamfer Dist1 = 10.0000, Dist2 = 10.0000 • Select first line or [Polyline/Distance/Angle/Trim/Method]: D (to set distances) • Specify first chamfer distance <10.0000>: 20 (enter required distance) • Specify second chamfer distance <20.0000>: (first distance value or enter a different value) • Select first line or [Polyline/Distance/Angle/Trim/Method]: (pick P1) • Select second line: (pick P2)

  31. The Fillet Command • Keyboard FILLET short-cut F • The Fillet command is a very useful tool which allows you to draw an arc between two intersecting lines or adjacent polyline segments. You first need to use the command to set the required radius and then a second time to select the two lines. • Command Sequence • Command: FILLET • Current settings: Mode = TRIM, Radius = 10.0000 • Select first object or [Polyline/Radius/Trim]: R • Specify fillet radius <10.000>: 25 • Select first object or [Polyline/Radius/Trim]: (pick P1) • Select second object : (pick P2) Polyline mode

  32. The Explode Command • Keyboard EXPLODE • The Explode command is used to "explode" single objects back to their constituent parts. In other words, the command is used to return blocks, polylines etc. (which may be composed of a number of component objects) back to their individual component parts. The change has no visible effect.

  33. Exercise • Draw a square 1*1. (1,2,3,4) • Draw an arc AB, centered at 1, radius=1 units. • Continue drawing arcs BC, CD, DE…etc, with radii 2 units, 3 units, 4 units …etc. respectively.

  34. Exercise • Draw a equilateral triangle in a circle with a radius of 50 units. • Follow the instructions; • Draw circle ABCD, with radius of 50 units. • Draw another circle with a radius of 50 units, centered at A. Use “Quadrant” osnap function. • Join the intersecting points C and D (use “Intersection” osnap function) with point B (Use “Quadrant” osnap function)

  35. Exercise • Draw a equilateral hexagon in a circle with a radius of 50 units. • Follow the instructions; • Draw a circle, with radius of 50 units. • Draw another circle with a radius of 50 units, centered at A. Use “Quadrant” osnap function. • Join the intersecting points B and C (use “Intersection” osnap function) with point A. (Use “Center” osnap function). • Use “Mirror” command, copy BA and AC with respect to the vertical axis (Use “Quadrant” osnap function for the mirror reference).

  36. Homework • Use different layers for actual drawing and the construction lines. • No need to write the dimensions. • Use “CENTER2” for construction line types.

More Related