1 / 18

Technical Drawing CHAPTER 1

Technical Drawing CHAPTER 1. By : Aznita Abdullah. Why engineers use orthographic projection?. Engineers need to be able to explain and simplify complicated design ideas for others to understand. Why engineers use orthographic projection ?.

milt
Télécharger la présentation

Technical Drawing CHAPTER 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Technical DrawingCHAPTER 1 By: Aznita Abdullah

  2. Why engineers use orthographic projection? Engineers need to be able to explain and simplify complicated design ideas for others to understand.

  3. Why engineers use orthographic projection? To show complicated 3 dimensional (3D) object in two dimension (2D)

  4. ORTHOGRAPHIC PROJECTION • the object is looked at from three views at 90 degrees to each other.

  5. ORTHOGRAPHIC PROJECTION – 3 VIEWS • Plan • Front View • Side View (or End View)

  6. ORTHOGRAPHIC PROJECTION Viewed in 2 ways: • 1st Angle Projection • 3rd Angle Projection.

  7. 1st Angle Projectionused mainly in USA FRONT VIEW END VIEW ISOMETRIC PLAN

  8. 1st Angle Projection Symbol FRONT VIEW SIDE VIEW SIDE VIEW FRONT VIEW

  9. 3rd Angle Projection Used in UK and in most countries of the world ISOMETRIC PLAN FRONT VIEW END VIEW

  10. 3rd angle Projection Symbol SIDE VIEW FRONT VIEW FRONT VIEW SIDE VIEW

  11. DIFFERENCE BETWEEN 1ST ANGLE AND 3RD ANGLE 1st Angle Projection  3rd Angle Projection 

  12. MODULE OBJECTIVES By the end of this module the student will be able to: 1.1 Describe orthographic projection 1.2 State why engineers use orthographic projection 1.3 Compare 1st degree angle and 3rd degree angle

  13. MODULE OBJECTIVES 1.4 By the end of this module the student will be able to: Correctly sketch two-dimensional views from three dimensional drawings.

  14. PLAN VIEW END VIEW FRONT VIEW

  15. MODULE OBJECTIVES 1.5 By the end of this module the student will be able to: Correctly identify and draw different types of line.

More Related