1 / 10

Investigation of Acoustic Localization of rf Cavity Breakdown

Investigation of Acoustic Localization of rf Cavity Breakdown. George Gollin Department of Physics University of Illinois at Urbana-Champaign LCRD 2.15. Can we learn more about NLC rf cavity breakdown through acoustic signatures of breakdown events?. Who is participating What we’re doing

dieter
Télécharger la présentation

Investigation of Acoustic Localization of rf Cavity Breakdown

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Investigation of Acoustic Localization of rf Cavity Breakdown George Gollin Department of Physics University of Illinois at Urbana-Champaign LCRD 2.15 George Gollin, UTA LC 1/9/03

  2. Can we learn more about NLC rf cavity breakdown through acoustic signatures of breakdown events? Who is participating What we’re doing What we want/need George Gollin, UTA LC 1/9/03

  3. Who is participating George Gollin (professor, physics) Mike Haney (engineer, runs HEP electronics group) Bill O’Brien (professor, EE) Joe Calvey (UIUC undergraduate physics major) Michael Davidsaver (UIUC undergraduate physics major) Rachel Hillmer (UIUC undergraduate physics major) At UIUC (“UC” = Urbana-Champaign): At SLAC: Marc Ross George Gollin, UTA LC 1/9/03

  4. Who is participating Haney’s PhD is in ultrasound imaging techniques O’Brien’s group pursues a broad range of acoustic sensing/imaging projects in biological, mechanical,… systems Gollin is clueless, but enthusiastic. Ross is our contact at SLAC and participates in related work taking place there. George Gollin, UTA LC 1/9/03

  5. Work is just starting in Gollin’s lab. Ross sent us a short piece of NLC and some engineering drawings specifying the geometry. O’Brien has lent us a couple of 2.2 MHz transducers and associated circuitry. What we’re doing George Gollin, UTA LC 1/9/03

  6. Initial investigations are entirely pedagogical: we need to understand the most basic of issues. • How reproducible is pulse-to-pulse timing and amplitude information? • How good is single-shot information (in comparison with multiple-pulse averages)? • Is acoustic noise a concern? • Can we successfully model the acoustic properties of objects and sensors? • Can we make use of detailed pulse shape information or only some sort of time-integrated amplitude? What we’re doing George Gollin, UTA LC 1/9/03

  7. Very first measurement: where’s the bottom of a fish tank? What we’re doing George Gollin, UTA LC 1/9/03

  8. Surprises: • Single-shot timing information looks very good: easy to locate individual peaks in echo pulse to ~10 nsec. • Pulse-to-pulse reproducibility is also very good. • Noise is insignificant. • Perhaps detailed analysis of acoustic pulse shape (not just integrated amplitude) will be productive? • In water, 10 nsec ~ 15 mm; in copper, 10 nsec ~ 50 mm. (Note: reflections or attenuation in NLC structures could make this impossible to achieve.) What we’re doing George Gollin, UTA LC 1/9/03

  9. What we’re doing • Fancier setup in the works: • MATLAB for finite-element analysis and modeling of acoustic properties (installed, not yet used to model something simple) • LABView DAQ will drive transducer pulser and 100 MHz dual channel PCI card digital scope (to be adapted from a system used to test CLEO III analog circuits) • Undergraduates will start working with us in January. George Gollin, UTA LC 1/9/03

  10. What we want/need • Plain copper and heat-annealed copper dowels to check acoustic properties (e.g. frequency dependence of vs and attenuation) • A limited amount of financial support from DOE: • we need another PC to serve as the MATLAB engine • small amount of PCI instrumentation for dedicated setup • salary support for undergraduates • More time! (this is a university-based effort…) • So far this is great fun, BUT: DOE must begin to provide support for university-based LC work. George Gollin, UTA LC 1/9/03

More Related