1 / 9

NASA/FAA Flight Test –Flammability Analysis System

NASA/FAA Flight Test –Flammability Analysis System. Steve Summer Project Engineer Federal Aviation Administration Fire Safety Branch, AAR-440. International Aircraft Fire Protection Working Group Atlantic City, NJ November 6, 2003. Objective.

eldon
Télécharger la présentation

NASA/FAA Flight Test –Flammability Analysis System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NASA/FAA Flight Test –Flammability Analysis System Steve Summer Project Engineer Federal Aviation Administration Fire Safety Branch, AAR-440 International Aircraft Fire Protection Working Group Atlantic City, NJ November 6, 2003 IASFPWG – Atlantic City, NJ

  2. Objective • To date, real-time flammability (hydrocarbon) data in flight has yet to be obtained from fuel tanks (CWT or wing) • Lab based instruments in use at the FAA are based on a flame-ionization detection (FID) technique, and are unsuitable for in-flight use • Such a system must maximize safety and data reliability while being able to handle the rigors of a flight environment (vibration, pressure & temperature changes, etc…) IASFPWG – Atlantic City, NJ

  3. FAS System Overview • The FAS uses a Non-Dispersive Infrared (NDIR) Analyzer to measure fuel tank flammability in the form of total hydrocarbons (THC) • Sample stream must be heated at all points leading to the NDIR to prevent condensation of fuel vapors • Overall system consists of two units • Pallet Mounted NDIR Analyzer • Rack Mounted Sampling System IASFPWG – Atlantic City, NJ

  4. FAS System Overview • Pallet Mounted NDIR Analyzer: • Custom built by Rosemount Analytical specifically for this application • Separated into two sections – electronics and sample stream • Sample stream section temperature controlled to 200°F • Entire unit continuously purged IASFPWG – Atlantic City, NJ

  5. Controller Electronics Panel Sample Flow/Pressure Conditioning Unit Heated Sample Box Pump FAS System Overview • Rack Mounted Sampling System: • Supplies a temperature, pressure and flow controlled sample to the NDIR utilizing four components: • Single stage diaphragm pump pulls sample from CWT • Sampling conditioning unit actively controls pressure and flow of sample supplied to NDIR • Heated box maintains a 200°F sample • Electronics panel houses all pressure/temperature electronic control units • Components containing sample lines are continuously purged IASFPWG – Atlantic City, NJ

  6. FAS – Safety Features • System safety features include: • Diaphragm pump is safe for explosive atmosphere and pump motor has failure containment standard • Pump motor and all electronics kept separated from sample stream where possible • All enclosures that sample passes through are continuously purged • Float valve, fluid trap and flash arrestor on sample inlet IASFPWG – Atlantic City, NJ

  7. FAS Block Diagram IASFPWG – Atlantic City, NJ

  8. FAS – Performance IASFPWG – Atlantic City, NJ

  9. Summary • The FAS has been shown to accurately measure a sample of 2 & 4% propane from sea level to ~35 kft with an accuracy of 0.1% • The FAS gave consistent readings when compared to a typical FID type analyzer • The FAS has ability to accurately and safely monitor fuel tank flammability in-flight, real-time IASFPWG – Atlantic City, NJ

More Related