1 / 25

Lighting Design Lecture

Lighting Design Lecture. Common and Recommended Light Levels Indoor. The table below is a guidance for recommended light level in different work spaces:. Design of the Lighting System the lumen method.

frisco
Télécharger la présentation

Lighting Design Lecture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lighting Design Lecture

  2. Common and Recommended Light Levels Indoor

  3. The table below is a guidance for recommended light level in different work spaces:

  4. Design of the Lighting Systemthe lumen method this is a simplified design approach to enable the designer to achieve an even light distribution in spaces of reasonably simple geometry (i.e. rectangular). • The basis of the lumen method is the following equation: • N - is the number of luminaires required; • E - is the required illuminance (lux); • A - is the area to be lit; • n - is the number of lamps per luminaire; • F - is the lamp lumen output (lumens); • MF - is known as the maintenance factor, which is a combination of three factors; • UF - is the utilisation and is a function of the luminaire properties and room geometry.

  5. length L width W ceiling cavity ceiling plane hm working plane floor cavity Utilisation Factor (UF) • The room geometry is a crucial factor in determining the utilisation factor term in the lumen equation. Several parameters are important. • floor cavity • ceiling cavity • working plane • ceiling plane • hm • length L • width W • In the Lumen method of design the room geometry is characterised by a room index (K):

  6. Maintenance Factor (MF) • The maintenance factor is a value designed to account for the reduction in light output from a lighting system due to: the ageing of the lamps and the accumulation of dirt and dust on the light fittings and room surfaces. The MF is therefore time varying and is the product of 4 factors: • Lamp lumen maintenance factor (LLMF) – a value between 0 and 1 which accounts for the degradation of lamp output over time: • The LLMF for any time t can be obtained from manufacturer’s data

  7. Example A production area in a factory measures 60 m x 24 m. The illumination required for the factory area is 200 lux. • Utilisation factor = 0.4 • Lamp Maintenance Factor = 0.75 • Find the number of lamps required if each lamp has a Lighting Design Lumen (LDL) output of 18,000 lumens.

  8. Solution N = (200 lux x60m x24m) / (18,000 lumens x0.4 x 0.75 ) N =53.33 N = 54 lamps

  9. Spacing distance Mounting Height (Hm) 0.85 metres Working plane height f.f.l. Spacing The spacing to mounting height ratio: S/H

  10. Example 2

  11. The number of lamps in each row can be calculated by dividing the total number of lamps found in example 1 by the number of rows. • Total lamps 54 / 4 = 13.5 goes up to nearest whole number = 14 lamps in each row. • The longitudinal spacing between lamps can be calculated by dividing the length of the building by the number of lamps per row. • Length of building 60 m / 14 = 4.28 metres. • There will be half the spacing at both ends = 4.28 / 2 = 2.14 metres

  12. 60 metres Half Spacing 2.14 metres 4.28 metres 6 m 24 metres Scale 1 cm = 4 metres Factory Plan

  13. Light Fittings 4.28 m 60 metres 6 m 24 metres Scale 1 cm = 4 metres Factory Plan • The total array of fittings can be shown below

  14. In the case of fluorescent luminaires that do not have an axially-symmetrical intensity distribution, maximum spacing infonnation stated in the photometric data may indicate: • Spacing to Height ratio (SHR or S/Hm) is defined as the ratio of the distance between adjacent luminaires (centre to centre), to their height above the working plane. • For a rectangular arrangement of luminaires and by approximation, • where A = total floor area •              N = number of luminaires •              Hm = mounting height Uniformity of illuminance • Spacing to Height Ratio

  15. Maximum spacing information for symmetrical luminaires may be shown in the photometric data as SHR MAX, meaning space-height ratio maximum. • For example, if a SHR MAX 1.4is stated for the luminaire in last Figure and the mounting height of luminaire above the working plane is 1.9 m then the maxImum spacing on either direction can be calculated as follows:

  16. In these circumstances, three conditions must be complied with: • 1- The spacing in the transverse direction (SHR TR) must not exceed SHR MAX TR stated. • 2- The spacing in the axial direction (SHR AX) must not exceed the SHR MAX stated. • 3- The actual spacings in the two direction (SHR AX & SHR TR) when multiplied together must not exceed ( SHR MAX ) 2

More Related